Quote:
|
Originally Posted by cellquery I E1 12:46:03 OptiFlash 4.16 T1 started
I E2 12:46:10 ThreadProtocol started
I E3 12:46:10 OS: NT family, Ver:5.1
I E4 12:46:10 Boot loader protocol type: passive
I E5 12:46:10 Memory interface type: 1
I E6 12:46:10 Setup loader: G:\DATA\TST\AgereDownloader-v1\AgereDownloader-v1\Downloader\sl_sceptrehp_sgh_std.sre
I E7 12:46:10 Setup loader base addr: 0x00000000
I E8 12:46:10 Flash loader: G:\DATA\TST\AgereDownloader-v1\AgereDownloader-v1\Downloader\fl_sceptrehp_sgh_hw1_v24_S04.sre
I E9 12:46:10 Flash loader base addr: 0x30000000
I E10 12:46:10 Stack base addr: 0x20000000
I E11 12:46:10 Stack buffers: 2
I E12 12:46:10 0: 0x20000000 - 0x21ffffff [32 MB (33554432 Bytes)]
I E13 12:46:10 1: 0x28000000 - 0x2fffffff [128 MB (134217728 Bytes)]
I E14 12:46:10 ThreadGUI started
I E15 12:46:10 Opened COM26 at 115200 baud
I E16 12:46:10 PC transfer speeds (COM26): 57600 115200 230400 460800 921600
I E17 12:46:10 Loading S-record file (RangeCheck=Off)
I E18 12:46:10 File: G:\DATA\TST\AgereDownloader-v1\AgereDownloader-v1\Downloader\sl_sceptrehp_sgh_std.sre
I E19 12:46:10 SRE line 181: IGNORING: S70500000000FA
I E20 12:46:10 There is 1 memory region in the S-record file:
I E21 12:46:10 1: 0x00000000 - 0x00000b3f = 2880 Bytes
I E22 12:46:10 Loading S-record file (RangeCheck=Off)
I E23 12:46:10 File: G:\DATA\TST\AgereDownloader-v1\AgereDownloader-v1\Downloader\fl_sceptrehp_sgh_hw1_v24_S04.sre
I E24 12:46:10 SRE line 30614: IGNORING: S70530000000CA
I E25 12:46:10 There is 1 memory region in the S-record file:
I E26 12:46:10 1: 0x30000000 - 0x30077943 = 489796 Bytes
I E27 12:46:10 Loading S-record file (RangeCheck=On)
I E28 12:46:10 File: G:\DATA\Samsung\E900\E900DXFE5\E900DXFE5.sre
I E29 12:46:22 SRE line 1: IGNORING: S00600004844521B
I E30 12:47:11 SRE line 4190210: IGNORING: S705A002000058
I E31 12:47:12 There are 2 memory regions in the S-record file:
I E32 12:47:12 1: 0x20010000 - 0x21ffffff = 33488896 Bytes
I E33 12:47:12 2: 0x28000000 - 0x29ffffff = 33554432 Bytes
E E34 12:47:12 Attempt to write to reserved region 0x21ff0000 - 0x22000000 (0x20010000 - 0x21ffffff)
I E35 12:47:12 Closed COM26
I E36 12:47:12 ReLoad: 18 (ERR_BAD_SREC_ADDR)
I E37 12:47:12 Error code: ERR_BAD_SREC_ADDR
E E38 12:47:12 Sorry, an error has occured ! (ERR_BAD_SREC_ADDR)
I E39 12:47:12 ThreadProtocol finished
I E40 12:47:12 ThreadProtocol: 18
I E41 12:47:12 ThreadGUI finished
WHATS WRONG >??? |
Use original USB cable!!!
Put phone in flash mode!!!
Install Samsung Drivers for phone in flash mode!!!
Check COM port in CP and select right COM port, then flash!