GSM-Forum - View Single Post - Very cool update again. New Nokia Tool for Multi-box supports DCT4 plus!

GSMtricks · 11-16-2006, 16:03

New version of Nokia Tool DCT4/WD2 Service Tool for MultiBox v2.0M was released.

Release Highlights
1. New supported phones: 2310, N-Gage (note You can use KS3 on ALL DCT4/WD2 phones just untick SAFE MODE)
2. Added support for DCT4Plus: Resetting Security Code and bad Security Code Attempts (tested on 1600 v5.x). Currently KS3 is one and only software on market which can do job as well

3. Added support for Disco Lights Tests (used in 3220 for example) you can test RED/GREEN leds in all 4 directions. Needed for proper diagnose.
4. Added support for "Active Covers" Testing - for 5140i, 3100, 3510i, etc. Of course phone must have installed Active Cover with LEDs and IC. Needed to test AC Interface and AC cover itself. 14 sequences avaiable for testing.
5. Added LIFETIMER RESET support for rest of DCT4 models (tested on 1600 v5.x)
6. ADC Reading is buffered now, you can read it continously with 0ms Delay (no lags in reading

)
7. FIA TOOL Included into package (to repair MCUSWCRC on 6610i/7250i, Enable netmonitor, etc)
8. As always, lot of bugfixes and improvments
Full Changelog
v2.0m
=====
- Added new supported phones: 2310 RM-189 (still ASIC2, but UNLOCK by codes not supported yet), N-GAGE NEM-4
- KarwosSuite 3 is FIRST applcation which can RESET security code, and RESET security code bad attempts in DCT4PLUS Models (latest 1600, 2310) and ASIC11 (2610, etc). Changing Security code to ANY VALUE (as in classic ASIC2) is not possible, due to scrambling Security Code memory area. Note that even "Security Code Mastercode" reavaled by Dejan IS NOT ABLE to reset Security Code on those models. To reset just tick "DCT4PLUS" under "Wr Security" Button, and click Wr Security to proceed resetting.
- KarwosSuite is able to READ SECURITY CODE BAD ATTEMPTS for DCT4PLUS Models
- KarwosSuite is able to TICK AUTOMATICALLY "DCT4PLUS" under "Wr Security"
- Added support for Lifetimer Clearing in another part of DCT4 phones, DCT4Plus are probably supported also (tested on 1600 MCU 5.x)
- Introduced a "Active Covers" burn-in diagnostic. This is used to testing interface between phone and Nokia original "Active" covers with ICs and LEDs (14 sequences avaiable for testing LEDs and Interface)
- Introduced "Disco Lights Test". It is used to test addidtional lights, used i.e. in RH-37 3220.
You can test following leds:
RED: Upper Left, Upper Right, Lower Left, Lower Right
GREEN: Upper Left, Upper Right, Lower Left, Lower Right
You can easily trackdown damaged leds :-)
- Added option "Delay" to ADC Reading to set Delay between Continouous reads in MS
- Output of ADC Reading is buffered now - so you can use 0ms Delay w/o any problems :-)
- LCD Tests fixed for: 6030, 6020, 3220, and other new DCT4.
- Bugfixes, as always
- FIA Tool Updated to v1.0b, fixed bug with MCUSW CRC repairing and some foreign changes
- Code refactorized, smoothly time improvments

So ENJOE your Multi-box ;-)

11-16-2006, 16:03	#1 (permalink)
GSMtricks No Life Poster Join Date: Mar 2001 Age: 44 Posts: 11,016 Member: 3610 Status: Offline Sonork: 100.54638 Thanks Meter: 1,652	Very cool update again. New Nokia Tool for Multi-box supports DCT4 plus! New version of Nokia Tool DCT4/WD2 Service Tool for MultiBox v2.0M was released. Release Highlights 1. New supported phones: 2310, N-Gage (note You can use KS3 on ALL DCT4/WD2 phones just untick SAFE MODE) 2. Added support for DCT4Plus: Resetting Security Code and bad Security Code Attempts (tested on 1600 v5.x). Currently KS3 is one and only software on market which can do job as well 3. Added support for Disco Lights Tests (used in 3220 for example) you can test RED/GREEN leds in all 4 directions. Needed for proper diagnose. 4. Added support for "Active Covers" Testing - for 5140i, 3100, 3510i, etc. Of course phone must have installed Active Cover with LEDs and IC. Needed to test AC Interface and AC cover itself. 14 sequences avaiable for testing. 5. Added LIFETIMER RESET support for rest of DCT4 models (tested on 1600 v5.x) 6. ADC Reading is buffered now, you can read it continously with 0ms Delay (no lags in reading ) 7. FIA TOOL Included into package (to repair MCUSWCRC on 6610i/7250i, Enable netmonitor, etc) 8. As always, lot of bugfixes and improvments Full Changelog v2.0m ===== - Added new supported phones: 2310 RM-189 (still ASIC2, but UNLOCK by codes not supported yet), N-GAGE NEM-4 - KarwosSuite 3 is FIRST applcation which can RESET security code, and RESET security code bad attempts in DCT4PLUS Models (latest 1600, 2310) and ASIC11 (2610, etc). Changing Security code to ANY VALUE (as in classic ASIC2) is not possible, due to scrambling Security Code memory area. Note that even "Security Code Mastercode" reavaled by Dejan IS NOT ABLE to reset Security Code on those models. To reset just tick "DCT4PLUS" under "Wr Security" Button, and click Wr Security to proceed resetting. - KarwosSuite is able to READ SECURITY CODE BAD ATTEMPTS for DCT4PLUS Models - KarwosSuite is able to TICK AUTOMATICALLY "DCT4PLUS" under "Wr Security" - Added support for Lifetimer Clearing in another part of DCT4 phones, DCT4Plus are probably supported also (tested on 1600 MCU 5.x) - Introduced a "Active Covers" burn-in diagnostic. This is used to testing interface between phone and Nokia original "Active" covers with ICs and LEDs (14 sequences avaiable for testing LEDs and Interface) - Introduced "Disco Lights Test". It is used to test addidtional lights, used i.e. in RH-37 3220. You can test following leds: RED: Upper Left, Upper Right, Lower Left, Lower Right GREEN: Upper Left, Upper Right, Lower Left, Lower Right You can easily trackdown damaged leds :-) - Added option "Delay" to ADC Reading to set Delay between Continouous reads in MS - Output of ADC Reading is buffered now - so you can use 0ms Delay w/o any problems :-) - LCD Tests fixed for: 6030, 6020, 3220, and other new DCT4. - Bugfixes, as always - FIA Tool Updated to v1.0b, fixed bug with MCUSW CRC repairing and some foreign changes - Code refactorized, smoothly time improvments So ENJOE your Multi-box ;-)