View Single Post
Old 05-04-2007, 09:52   #5 (permalink)
zoki
No Life Poster
 
Join Date: Apr 2001
Location: Macedonia
Age: 46
Posts: 1,323
Member: 4123
Status: Offline
Thanks Meter: 27
I try allready

Quote:
Originally Posted by bod View Post
In Phoenix go to Manage Connections and choose No Connection.
Then you will notice that Scan Product is dissabled, so you choose Open Product and scroll to N-95.
You will see the N-95 Product shown in the bottom of Phoenix.
Now go to flashing- Firmware tab and small box will appear on the left side.
Now push the small box and choose desired Product code and software should appear in the other box.
Then tick dead phone usb flashing.
Press Flash (You should see adl loader and other drivers detected under found new hardware and should start Flashing.

BR
Yes,I try this allready,but It's shows that phone is in adl loader but veryfing comunication 1of 45 power on the phone ,2of 45,etc and then I have error "please see that phone is connected",every time.
  Reply With Quote
The Following User Says Thank You to zoki For This Useful Post:
 
Page generated in 0.07698 seconds with 7 queries