[GSM_Support]

Here is tested and 100% working method.

1. Disassemble the phone.
2. Connect phone PCB to PC via Smart-Clip (phone > Forced boot mode cable > Smart-Clip > LPT cable > PC).
3. Connect S-Card to PC USB port.
4. Connect power supply to Smart-Clip.
5. Launch SmartMoto.
6. Choose "Smart-Clip USB port" in phone connection window.
7. Connect TestPoint A to TestPoint B.
8. Connect phone battery.
9. Push Button 1 and Button 2 simultaneously.
10. Press "Search" button in SmartMoto. Software should perform the following steps:
    • SmartMoto detects S-Card;
    • SmartMoto detects Smart-Clip;
    • SmartMoto detects the handset as "S Blank Neptune LTE", "S Blank"Paragon POG" or "S Blank Rainbow POG".
11. Disconnect TestPoint.
12. Log to bookmark "Unlock".
13. Select a correct model from the scrolling list.
14. Press "Unlock via TestPoint".
15. Disconnect PCB after the process completed.
16. Assemble the phone.

Please ensure that all steps are performed correctly strictly following the manual. Do not make too long pauses between each step.


Best Regards
GSMServer team