N95 dual sim slider model set came with restart complaint.I formate the set successfully.but it took long time.see log.
COM3 [VCP0] selected
Device: Autodetect 6205-6227 NOR
Checking data, wait...
advanced flash detection active
Action: reset
Boot...
Press and HOLD Power button now !
baud autodetection active
19200
Connecting, wait...
Initializing[6226:8A02:8A01]...
high speed disabled
boot step size: 0002
Release Power button now !
Boot Done
Initialize...
detecting chip #00 in region #00...
flash: EC257E25082501:29EA0000000000
flash: Samsung AMD/Fujitsu std [D 0008x002000 00FEx010000 0008x002000] 16Mb
number of flash chip/regions detected: 01/01
Initialize Done
Set baud...
slowest
Set baud Done
Identification...
device parameters autodetection in progress..
detecting chip #00 in region #00...
flash: EC257E25082501:29EA0000000000
flash: Samsung AMD/Fujitsu std [D 0008x002000 00FEx010000 0008x002000] 16Mb
number of flash chip/regions detected: 01/01
total flash region size: 01000000
detect device identification, method #1...
detection phase #1...
detect device parameters finished
structure: 2nd [enhanced] (or higher) generation
identification data Ok
identification data backup saved: id.3A5B08CA.[N618_PCB01_GPRS_MT6227_S01.1.BIN_BF2835F9].rpl
identification detection finished
device-id: 3A5B08CA
protocol ver: 04
ver. sw1: N618_PCB01_GPRS_MT6227_S01.1.BIN
ver. sw2: N618.1
ffs offset/size: 00E00000/00200000
detecting eeprom area in 1 chip(s)...
flash: EC257E25082501:29EA0000000000
checking area[00000000]: 00000000-00FFFFFF...
eeprom found near: 00E00000
detecting eeprom size...
eeprom size: 00200000
eeprom chip: 00
eeprom area: 00000000:00E00000-00FFFFFF
reading [eeprom[N618_PCB01_GPRS_MT6227_S01.1.BIN]]...
file saved: backup_eeprom[N618_PCB01_GPRS_MT6227_S01.1.BIN]_20070929-215647.B0E.bin
flash: EC257E25082501:29EA0000000000
Identification Done
Manipulation...
Manipulation Done
Finalization...
Finalization Done
Write...
formatting...
flash: EC257E25082501:29EA0000000000
Write Done
file saved: backup_system_log_3A5B08CA_N618_PCB01_GPRS_MT6227_ S01.1.BIN_BF2835F9_20070929-215705.B0X.bin
Finished, time used: 1240 sec
Remove/Install battery now !
