[JC_BY]

==== log opened: [02.11.2007 22:54:51] ====
Application: C:\Program Files\InfinityBox\ChineseMiracle\ChineseMiracle.ex e
Loading data, wait...
[Infinity Box] v1.62
S/N: 04F1:010C
Wait...
Device: Autodetect 6205-6227 NOR
Done
Action: read information
Model: Autodetect 6205-6227 NOR
Checking data, wait...
Phone should be Switched ON !
Connecting, wait...
Phone detected, wait...
Hardware version: MT6228, E02
Hardware version: MTK_HW
Software version: V818_A.POWERTIP.TE.0
Software date: 2004.07.02
Barcode: MT012345678901234567
imei: 350818002497569
Finished, time used: 22 sec
Power off phone now !
COM8 [VCP0] selected
Device: Autodetect 6205-6227 NOR
Checking data, wait...
advanced flash detection active
Action: read/check detailed information
Boot...
Press and HOLD Power button now !
baud autodetection active
19200
Connecting, wait...
Initializing[6228:8A02:8A02]...
chip-id: 0000:0101
error: Wrong model selected, select model: Autodetect 6228 NAND
Finished, time used: 8 sec
Remove/Install battery now !
Device: Autodetect 6228 NAND
COM8 [VCP0] selected
Device: Autodetect 6228 NAND
Checking data, wait...
Action: read/check detailed information
Boot...
Press and HOLD Power button now !
baud autodetection active
19200
Connecting, wait...
Initializing[6228:8A02:8A02]...
chip-id: 0000:0101
boot step size: 0400
Release Power button now !
Boot Done
Initialize...
version: 3.1
NAND id: ECF10095
page size: 800+40
pages/block: 40
bits i/o: 08
address cycles: 04
blocks: 0400
ram size: 00800000
NOR: 0000:000000000000 [00000000]
NAND: 00EC:00F100000095 [08400000]
warning: NOR flash chip not supported or not detected
Initialize Done
Set baud...
460800
Set baud Done
Identification...
converting data...
done
protocol ver: 04
ver. sw1: V818_A_PCB04_GPRS_MT6228_S02.POWERTIP_TE_06205.BIN
ver. sw2: V818_A.POWERTIP.TE.06205
ffs offset/size: 02000000/06000000
id-page Ok
nfi area detection finished: Ok
structure: 2nd [enhanced] (or higher) generation
identification data Ok
identification data backup saved: id.27EADFDB.[V818_A_PCB04_GPRS_MT6228_S02.POWERTIP_TE_06205.BIN _D3C715D5].rpl
New firmware detected: V818_A_PCB04_GPRS_MT6228_S02.POWERTIP_TE_06205.BIN
- make "Read detailed information" operation
- send "backup_system_log_..." file to support
- make "Read full flash" operation
- send flash backup file(s) to support
- include in your e-mail full text from phone back label (phone name etc.)
identification detection finished
file saved: backup_system_log_27EADFDB_V818_A_PCB04_GPRS_MT622 8_S02.POWERTIP_TE_06205.BIN_D3C715D5_20071102-225821.B4X.bin
Finished, time used: 79 sec
Remove/Install battery now !
COM8 [VCP0] selected
Device: Autodetect 6228 NAND
Checking data, wait...
Action: read NAND flash
Boot...
Press and HOLD Power button now !
baud autodetection active
19200
Connecting, wait...
Initializing[6228:8A02:8A02]...
chip-id: 0000:0101
boot step size: 0400
Release Power button now !
Boot Done
Initialize...
version: 3.1
NAND id: ECF10095
page size: 800+40
pages/block: 40
bits i/o: 08
address cycles: 04
blocks: 0400
ram size: 00800000
NOR: 0000:000000000000 [00000000]
NAND: 00EC:00F100000095 [08400000]
warning: NOR flash chip not supported or not detected
Initialize Done
Set baud...
460800
Set baud Done
Identification...
converting data...
done
protocol ver: 04
ver. sw1: V818_A_PCB04_GPRS_MT6228_S02.POWERTIP_TE_06205.BIN
ver. sw2: V818_A.POWERTIP.TE.06205
ffs offset/size: 02000000/06000000
id-page Ok
nfi area detection finished: Ok
structure: 2nd [enhanced] (or higher) generation
error: unexpected answer:
error: unexpected answer:
error: unexpected answer:
error: unexpected answer:
error: unexpected answer:
error: unexpected answer:
error: unexpected answer:
error: unexpected answer:
error: unexpected answer:
error: unexpected answer:
error: unexpected answer:
error: unexpected answer:
error: unexpected answer:
error: unexpected answer:
error: unexpected answer:
error: unexpected answer:
error: unexpected answer:
error: unexpected answer:
error: unexpected answer:
error: unexpected answer:
error: unexpected answer:
error: unexpected answer:
error: unexpected answer:
error: unexpected answer:
error: unexpected answer:
error: unexpected answer:
error: unexpected answer:
error: unexpected answer:
error: unexpected answer:
error: unexpected answer:
error: unexpected answer:
error: unexpected answer:
error: unexpected answer:
error: unexpected answer:
error: unexpected answer:
error: unexpected answer:
error: unexpected answer:
error: unexpected answer:
error: unexpected answer:
error: unexpected answer:
error: unexpected answer:
error: unexpected answer:
error: unexpected answer:
error: unexpected answer:
error: unexpected answer:
error: unexpected answer:
error: unexpected answer:
error: unexpected answer:
error: unexpected answer:
error: unexpected answer:
error: unexpected answer:
error: unexpected answer:
error: unexpected answer:
error: unexpected answer:
identification data damaged, recalculation required
identification detection finished
error: unexpected answer:
warning: probably errors exist during flash read operation
Finished, time used: 181 sec
Remove/Install battery now !