GSM-Forum - View Single Post

msdgsm · 11-30-2007, 23:17

Connecting to BB5 Box ...
Searching for phone ...
Phone found on FBUS interface
Reading phone info ...
Type: RM-78
Version: V_03.81_09-05-06_RM-78_(c)_Nokia
IMEI: 352265010xxxxxx
SP LOCK status:
Config Key: 2680600000000000
Block 1: CLOSED Type 5 Data: 26806F
Keyboard wrong codes counter: 1 wrong tries from max. 3 tries
Cable wrong codes counter: 0 wrong tries from max. 10 tries
Set Full Factory Defaults ...
Reset phone ...
Reset phone in TEST mode ...
Full Factory Defaults set OK
Skip autobackup of PM 308
Autobackup file:
RM-78_352265010xxxxxx_Locked_Keycnt_1_Fbuscnt_0__V_03 .81_09-05-06_RM-78_(c)_Nokia.bin
already exist
Auto Write PM 308 procedure started
Searching for backup file with lowest FBUS count ...
Finded backup file: RM-78_35226501xxxxxxx_Locked_Keycnt_1_Fbuscnt_0__V_03 .81_09-05-06_RM-78_(c)_Nokia.bin
Writting PM Field 308 Subfield 1 with length 4096 bytes
Reset phone ...
PM Field 308 Subfield 1 written OK
Reading SP Locks after Auto Write PM 308 ...
SP LOCK status:
Config Key: 2680600000000000
Block 1: CLOSED Type 5 Data: 26806F
Keyboard wrong codes counter: 1 wrong tries from max. 3 tries
Cable wrong codes counter: 0 wrong tries from max. 10 tries
Reset phone in TEST mode ...
Checking if model/version is supported for unlock ...
Please connect testpoints
Testpoints connected OK
Keep Testpoints connected until unlock finish!
Unlocking phone ...
Try number: 1
Sending SP code: #pw+012345678901234+7#
Response byte: 02
Try number: 2
Sending SP code: #pw+012345678901234+7#
Response byte: 55
Try number: 3
Sending SP code: #pw+012345678901234+7#
Response byte: 55
Try number: 4
Sending SP code: #pw+012345678901234+7#
Response byte: 55
Try number: 5
Sending SP code: #pw+012345678901234+7#
Response byte: 55
Try number: 6
Sending SP code: #pw+012345678901234+7#
Response byte: 55
Try number: 7
Sending SP code: #pw+012345678901234+7#
Response byte: 55
Try number: 8
Sending SP code: #pw+012345678901234+7#
Response byte: 55
Try number: 9
Sending SP code: #pw+012345678901234+7#
Response byte: 55
Try number: 10
Sending SP code: #pw+012345678901234+7#
Response byte: 55
Unlock fail. Please try again.

11-30-2007, 23:17	#1 (permalink)
msdgsm No Life Poster Join Date: Apr 2007 Posts: 537 Member: 481700 Status: Offline Thanks Meter: 14	can't unlock 6280 spansion chip 3.81 Connecting to BB5 Box ... Searching for phone ... Phone found on FBUS interface Reading phone info ... Type: RM-78 Version: V_03.81_09-05-06_RM-78_(c)_Nokia IMEI: 352265010xxxxxx SP LOCK status: Config Key: 2680600000000000 Block 1: CLOSED Type 5 Data: 26806F Keyboard wrong codes counter: 1 wrong tries from max. 3 tries Cable wrong codes counter: 0 wrong tries from max. 10 tries Set Full Factory Defaults ... Reset phone ... Reset phone in TEST mode ... Full Factory Defaults set OK Skip autobackup of PM 308 Autobackup file: RM-78_352265010xxxxxx_Locked_Keycnt_1_Fbuscnt_0__V_03 .81_09-05-06_RM-78_(c)_Nokia.bin already exist Auto Write PM 308 procedure started Searching for backup file with lowest FBUS count ... Finded backup file: RM-78_35226501xxxxxxx_Locked_Keycnt_1_Fbuscnt_0__V_03 .81_09-05-06_RM-78_(c)_Nokia.bin Writting PM Field 308 Subfield 1 with length 4096 bytes Reset phone ... PM Field 308 Subfield 1 written OK Reading SP Locks after Auto Write PM 308 ... SP LOCK status: Config Key: 2680600000000000 Block 1: CLOSED Type 5 Data: 26806F Keyboard wrong codes counter: 1 wrong tries from max. 3 tries Cable wrong codes counter: 0 wrong tries from max. 10 tries Reset phone in TEST mode ... Checking if model/version is supported for unlock ... Please connect testpoints Testpoints connected OK Keep Testpoints connected until unlock finish! Unlocking phone ... Try number: 1 Sending SP code: #pw+012345678901234+7# Response byte: 02 Try number: 2 Sending SP code: #pw+012345678901234+7# Response byte: 55 Try number: 3 Sending SP code: #pw+012345678901234+7# Response byte: 55 Try number: 4 Sending SP code: #pw+012345678901234+7# Response byte: 55 Try number: 5 Sending SP code: #pw+012345678901234+7# Response byte: 55 Try number: 6 Sending SP code: #pw+012345678901234+7# Response byte: 55 Try number: 7 Sending SP code: #pw+012345678901234+7# Response byte: 55 Try number: 8 Sending SP code: #pw+012345678901234+7# Response byte: 55 Try number: 9 Sending SP code: #pw+012345678901234+7# Response byte: 55 Try number: 10 Sending SP code: #pw+012345678901234+7# Response byte: 55 Unlock fail. Please try again.