| nokia 6300 dead pin out folder pinout here log...
COM1 [Serial0] selected
Device: Autodetect 6205-6227 NOR
Checking data, wait...
advanced flash detection active
Action: write NOR flash
"smart write" active
write: Firmware
skip: Customization
skip: Language Pack
skip: Eeprom/ffs
Boot...
Press and HOLD Power button now !
baud autodetection active
9600
Connecting, wait...
error: boot phase#1 failed
Release Power button now !
in case of initial connection problem: on/off "Boot baudrate autoselect" box.
Boot Fail
Finished, time used: 2 sec
Remove/Install battery now !
COM1 [Serial0] selected
Device: Autodetect 6205-6227 NOR
Checking data, wait...
advanced flash detection active
Action: write NOR flash
"smart write" active
write: Firmware
skip: Customization
skip: Language Pack
skip: Eeprom/ffs
Boot...
Press and HOLD Power button now !
Connecting, wait...
Initializing[6226:8A02:8A01]...
chip: 0031:0610:BAEC
high speed disabled
boot step size: 0002
Release Power button now !
Boot Done
Initialize...
detecting chip #00 in region #00...
flash: 01227E22202200:29EA0000000000
flash: Amd AMD/Fujitsu std [D 0004x010000 003Ex040000 0004x010000] 16Mb
detecting chip #01 in region #00...
flash: 01227E22202200:29EA0000000000
flash: Amd AMD/Fujitsu std [D 0004x010000 003Ex040000 0004x010000] 16Mb
number of flash chip/regions detected: 02/01
Initialize Done
Set baud...
115200
Set baud Done
Identification...
detect device identification#1...
detection phase #1...
detect device identification#1 finished
identification#1 structure: 2nd [enhanced] generation
security area#1 is Ok
security area#1 backup saved: C:\Program Files\InfinityBox\ChineseMiracle\backup_security\i d.17EABE5B.[TEMP26_05C_CARD_PCB01_GPRS_MT6226_S01.MAUI_05C_W06 _16_F2.BIN_4926F5CB].rpl
identification#1 detection finished
device-id: 17EABE5B
identification#1 protocol ver: 04
ver. sw1: TEMP26_05C_CARD_PCB01_GPRS_MT6226_S01.MAUI_05C_W06 _16_F2.BIN
ver. sw2: MAUI.05C.W06.16.F2
ffs offset/size: 00E00000/00200000
detect device identification#2...
detection phase #1...
.
warning: optional information not found
detect device identification#2 finished
Identification Done
Manipulation...
Manipulation Done
Finalization...
Finalization Done
Write...
detect device identification#2...
detection phase #1...
.
warning: optional information not found
detect device identification#2 finished
security area#1 calculation...
done
file saved: C:\Program Files\InfinityBox\ChineseMiracle\backup_system_log _17EABE5B_TEMP26_05C_CARD_PCB01_GPRS_MT6226_S01.MA UI_05C_W06_16_F2.BIN_4926F5CB_20080102-194938.B0X.bin
Area: Firmware
flash: 01227E22202200:29EA0000000000
Write: Firmware
Write Done
file saved: C:\Program Files\InfinityBox\ChineseMiracle\backup_system_log _17EABE5B_TEMP26_05C_CARD_PCB01_GPRS_MT6226_S01.MA UI_05C_W06_16_F2.BIN_4926F5CB_20080102-200721.B0X.bin
Finished, time used: 1100 sec
Remove/Install battery now !
after flash fone live thanks infinity. |