Quote:
Originally Posted by hack team  Connecting to BB5 Box ...
Searching for phone ...
Phone found on FBUS interface
Reading phone info ...
Type: RM-133
Version: V_05wk47v38.1_19-01-07_RM-133_(c)_Nokia.
IMEI: 3576510179***xx
SP LOCK status:
Config Key: 2720500015194980
Block 1: CLOSED Type 5 Data: 27205F
Block 2: CLOSED Type 5 Data: 27205F
Block 3: CLOSED Type 5 Data: 23594F
Block 4: CLOSED Type 5 Data: 23594F
Keyboard wrong codes counter: 0 wrong tries from max. 3 tries
Cable wrong codes counter: 10 wrong tries from max. 10 tries
Set Full Factory Defaults ...
Reset phone ...
Reset phone in TEST mode ...
Full Factory Defaults set OK
Skip autobackup of PM 308
Autobackup file:
RM-133_3576510179***xx_Locked_Keycnt_0_Fbuscnt_10__V_ 05wk47v38.1_19-01-07_RM-133_(c)_Nokia..bin
already exist
Auto Write PM 308 procedure started
Searching for backup file with lowest FBUS count ...
Finded backup file: RM-133_3576510179***xx_Locked_Keycnt_0_Fbuscnt_0__V_0 5wk47v38.1_19-01-07_RM-133_(c)_Nokia..bin
Writting PM Field 308 Subfield 1 with length 8192 bytes
Reset phone ...
PM Field 308 Subfield 1 written OK
Reading SP Locks after Auto Write PM 308 ...
SP LOCK status:
Config Key: 2720500015194980
Block 1: CLOSED Type 5 Data: 27205F
Block 2: CLOSED Type 5 Data: 27205F
Block 3: CLOSED Type 5 Data: 23594F
Block 4: CLOSED Type 5 Data: 23594F
Keyboard wrong codes counter: 0 wrong tries from max. 3 tries
Cable wrong codes counter: 0 wrong tries from max. 10 tries
Reset phone in TEST mode ...
Checking if model/version is supported for unlock ...
Please connect testpoints
Testpoints connected OK
Keep Testpoints connected until unlock finish!
Unlocking phone ...
Try number: 1
Sending SP code: #pw+012345678901234+7#
Response byte: 08
Try number: 2
Sending SP code: #pw+012345678901234+7#
Response byte: 08
Try number: 3
Sending SP code: #pw+012345678901234+7#
Response byte: 08
Try number: 4
Sending SP code: #pw+012345678901234+7#
Response byte: 08
Try number: 5
Sending SP code: #pw+012345678901234+7#
Response byte: 08
Try number: 6
Sending SP code: #pw+012345678901234+7#
Response byte: 08
Try number: 7
Sending SP code: #pw+012345678901234+7#
Response byte: 08
Try number: 8
Sending SP code: #pw+012345678901234+7#
Response byte: 08
Try number: 9
Sending SP code: #pw+012345678901234+7#
Response byte: 08
Try number: 10
Sending SP code: #pw+012345678901234+7#
Response byte: 08
Unlock fail. Please try again. |
I Have same problem. Testpoints OK. Who can help ?