View Single Post
Old 04-30-2008, 14:43   #1 (permalink)
sukhdeep
Freak Poster
 
sukhdeep's Avatar
 
Join Date: Sep 2006
Location: ludhiana,punjab
Posts: 223
Member: 348478
Status: Offline
Thanks Meter: 62
5300b unlocking problem with bb5-box

5300b unlocking problem with bb5-box unlocking fail pl help log is here



------ Operation: UNLOCK V1 Date: 29-04-2008 Time: 06:39:44 -------
Connecting to BB5 Box ...
Searching for phone ...
Phone found on FBUS interface
Reading phone info ...
Type: RM-146
Version: V_04.71_28-02-07_RM-146_(c)_Nokia.
IMEI: 35273201*******
SP LOCK status:
Config Key: 3027200000000000
Block 1: CLOSED Type 5 Data: 302720
Keyboard wrong codes counter: 3 wrong tries from max. 3 tries
Cable wrong codes counter: 10 wrong tries from max. 10 tries
Set Full Factory Defaults ...
Reset phone ...
Full Factory Defaults set OK
Skip autobackup of PM 308
Autobackup file:
RM-146_35273201******_Locked_Keycnt_3_Fbuscnt_10__V_0 4.71_28-02-07_RM-146_(c)_Nokia..bin
already exist
Auto Write PM 308 procedure started
Searching for backup file with lowest counters ...
Finded backup file: RM-146_352732014******_Locked_Keycnt_0_Fbuscnt_0__V_0 4.71_28-02-07_RM-146_(c)_Nokia..bin
Writting PM Field 308 Subfield 1 with length 8192 bytes
Reset phone ...
PM Field 308 Subfield 1 written OK
Reading SP Locks after Auto Write PM 308 ...
SP LOCK status:
Config Key: 3027200000000000
Block 1: CLOSED Type 5 Data: 302720
Keyboard wrong codes counter: 0 wrong tries from max. 3 tries
Cable wrong codes counter: 0 wrong tries from max. 10 tries
Checking if model/version is supported for unlock ...
Please connect testpoints
Testpoints connected OK
Keep Testpoints connected until unlock finish!
Unlocking phone ...
Try unlocking using keyboard codes ...
Try number (Keyboard): 1
Sending SP code: #pw+012345678901234+7#
Response byte: 08
Try number (Keyboard): 2
Sending SP code: #pw+012345678901234+7#
Response byte: 08
Try number (Keyboard): 3
Sending SP code: #pw+012345678901234+7#
Response byte: 08
Unlock using keyboard codes fail.
Try unlocking using cable codes ...
Try number (Cable): 1
Sending SP code: #pw+012345678901234+7#
Response byte: 08
Try number (Cable): 2
Sending SP code: #pw+012345678901234+7#
Response byte: 08
Try number (Cable): 3
Sending SP code: #pw+012345678901234+7#
Response byte: 08
Try number (Cable): 4
Sending SP code: #pw+012345678901234+7#
Response byte: 08
Try number (Cable): 5
Sending SP code: #pw+012345678901234+7#
Response byte: 08
Try number (Cable): 6
Sending SP code: #pw+012345678901234+7#
Response byte: 08
Try number (Cable): 7
Sending SP code: #pw+012345678901234+7#
Response byte: 08
Try number (Cable): 8
Sending SP code: #pw+012345678901234+7#
Response byte: 08
Try number (Cable): 9
Sending SP code: #pw+012345678901234+7#
Response byte: 08
Try number (Cable): 10
Sending SP code: #pw+012345678901234+7#
Response byte: 08
Unlock using cable codes fail.
Reading again SP Locks ...
SP LOCK status:
Config Key: 3027200000000000
Block 1: CLOSED Type 5 Data: 302720
Keyboard wrong codes counter: 3 wrong tries from max. 3 tries
Cable wrong codes counter: 10 wrong tries from max. 10 tries
Unlock fail. Please try again.
  Reply With Quote
 
Page generated in 0.08317 seconds with 7 queries