View Single Post
Old 06-25-2008, 14:54   #6 (permalink)
digitized
No Life Poster
 
digitized's Avatar
 
Join Date: Jul 2005
Location: ludhiana~india
Age: 38
Posts: 1,465
Member: 163833
Status: Offline
Sonork: 100.1579554
Thanks Meter: 5,700
check shorting in nokia dct4++ 2630.....


1..remove the pf n7700 mark in (1)...if u want to check is pf is short remove it and check shoting...if it is shot then replace it...

2..remove this coil mark in (2)..if u want to check the light ic is short....

3..remove ringer ic mark in (3)..if u want to check shoting remove it and check if shoting is gone replace it because ringer ic also got +b volt from battery....

4..remove this v.camdig ic n3301 mark in (4)..if u want to check the v.camdig maker ic ..this v.camdig maker ic got +b from batery....to make v,cam for camera.....

5..remove this ic n6000 bluetooth and fm ic mark in (5)..if u want to check the shoting cause by it remove it and check shoting because it got =b from batery....

6..at end check the power ic and reemove it to check shoting is there or not...

all the component which are mark in pink colur these all are coils these are place in series and +b of batery is gone throw them so if u remove the coil u not have to remove ic to check the shorting in pcb it save time and ur ic ....
Attached Images
File Type: jpg 2630 short1.JPG (108.9 KB, 8600 views)
File Type: jpg 2630 short.JPG (96.5 KB, 7437 views)
  Reply With Quote
The Following 195 Users Say Thank You to digitized For This Useful Post:
Show/Hide list of the thanked
 
Page generated in 0.09127 seconds with 9 queries