View Single Post
Old 04-21-2009, 15:05   #41 (permalink)
..::Mobile Smoker::..
No Life Poster
 
..::Mobile Smoker::..'s Avatar
 
Join Date: Aug 2005
Location: Pakistan
Posts: 2,436
Member: 170380
Status: Offline
Sonork: 100.1577994
Thanks Meter: 3,022
Thumbs up Nokia 8600(Luna) Successfully Flashed With Cyclone

here is the Log

Code:
Nokia DCT4/WD2/BB5 Service Tool Initialization Started, Engine Revision: 1.0.0.6634
Handling device: [Cyclone Team], [Cyclone Bootloader]
Handling device: [Cyclone Team], [Cyclone Box]
Initializing box...
Box Firmware: Cyclone Nokia Application v1.00, (Mar 13 2009 20:30:35, gcc-4.2.2, RTOS V5.1.0), Type: Signed Production Application
Box Serial Number: C00000DE
HW Revision: A, Suitable for: Production, Case: First Plastic Case, MCU Manufacture Time: 2008, wk32
Initializing security card...
Card Serial Number: D0000***
Card Firmware Revision: 0109
Card is activated
Box is activated
Started box selftests procedure
USB Voltage	5.12v	PASSED
MCU Voltage	3.28v	PASSED
Core Voltage	1.78v	PASSED
VBAT Voltage	0.45v	PASSED
VBAT Voltage	4.81v	PASSED
Box VPP disabled
VPP Voltage	0.00v	PASSED
Internal Box VPP Enabled
VPP Voltage	4.95v	PASSED
Box VPP disabled
VPP Voltage	0.04v	PASSED
External Box VPP Enabled
VPP Voltage	0.04v	FAILED - IGNORED - Probably power supply is not connected
Box VPP disabled
All box selftests passed!
Initializing FBUS...
All initialized - Ready to work
Processing pre flash tasks...
Backing up certificates...
Booting RAP...
CMT_SYSTEM_ASIC_ID:	 000000010000022600010006010C192101001101
CMT_EM_ASIC_ID:		 00000232
CMT_EM_ASIC_ID:		 00000353
CMT_PUBLIC_ID:		 2BA0010ADCCA6C566D20A2477760DAB595E7171F
CMT_ASIC_MODE_ID:	 00
CMT_ROOT_KEY_HASH:	 BAF3A9C3DBFA8454937DB77F2B8852B1
CMT_ROM_ID:		 191EC665DFAAF68F
RAP3Gv3_2nd.fg, Type: 2nd Boot Loader, Rev: 0.1.30.0, Algo: BB5
Flashbus Write baud set to 1.0Mbits
Flashbus Read baud set to 98Kbits
FlashChip[0,CMT]: 0x00EC220800008D21, Samsung, NOR
FlashChip[0,CMT]: 0x00EC003000000121, Samsung, ONENAND
Requested Algorithm: XSR 1.5 (CMT)
FlashContent[0,CMT]: 00000000000000000000000000000000, NOR
FlashChip[0,CMT]: 0xFFFF000000000000, Unknown, MMC
Transmission Mode Requested: Single Line, 8 bit, Accepted: Single Line, 8 bit
RAP3Gv3_algo.fg, Type: Algorithm, Rev: 0.1.40.0, Algo: BB5 ALGORITHM
Flashbus Write baud set to 4.0Mbits
Transmission Mode Requested: Dual Line, 32 bit, Accepted: Dual Line, 32 bit
Box TX2 Data Pin set to: Service Pin 3
Box VPP disabled
Internal CMT Phone VPP Enabled
PAPUBKEYS Hash for CMT: A4182F8DC2FFE3137CF7C7CC0BB90D0B7151AF4A
APE Subsystem Not Found
CMT NPC Ok
CMT HWC Not Found
CMT CCC Not Found
CMT R&D Ok
CMT VARIANT Ok
CMT PAPUBKEYS Ok
CMT KEYS Ok
Restarting MCU...
Read all certificates finished
Certificates backup thread finished, continuing...
Backing up simlock...
Starting PM read in range 308-308...
[308] Reading 9 records
[308,0] Reading 1 bytes
[308,1] Reading 8192 bytes
[308,3] Reading 1 bytes
[308,4] Reading 1 bytes
[308,5] Reading 10 bytes
[308,6] Reading 1 bytes
[308,7] Reading 1 bytes
[308,8] Reading 1 bytes
[308,9] Reading 40 bytes
PM Read OK, Time taken 1.985s
Simlock backup OK
Backup simlock thread finished, continuing...
Pre flash tasks finished, continuing...
Processing rm164__04.00.mcusw (CMT)...
Booting RAP...
CMT_SYSTEM_ASIC_ID:	 000000010000022600010006010C192101001101
CMT_EM_ASIC_ID:		 00000232
CMT_EM_ASIC_ID:		 00000353
CMT_PUBLIC_ID:		 2BA0010ADCCA6C566D20A2477760DAB595E7171F
CMT_ASIC_MODE_ID:	 00
CMT_ROOT_KEY_HASH:	 BAF3A9C3DBFA8454937DB77F2B8852B1
CMT_ROM_ID:		 191EC665DFAAF68F
rm164__04.00.mcusw, Type: Flash Image, Algo: BB5, XSR 1.5
RAP3Gv3_2nd.fg, Type: 2nd Boot Loader, Rev: 0.1.30.0, Algo: BB5
Flashbus Write baud set to 3.25Mbits
Flashbus Read baud set to 98Kbits
FlashChip[0,CMT]: 0x00EC220800008D21, Samsung, NOR
FlashChip[0,CMT]: 0x00EC003000000121, Samsung, ONENAND
Requested Algorithm: XSR 1.5 (CMT)
FlashContent[0,CMT]: 00000000000000000000000000000000, NOR
FlashChip[0,CMT]: 0xFFFF000000000000, Unknown, MMC
Transmission Mode Requested: Single Line, 8 bit, Accepted: Single Line, 8 bit
RAP3Gv3_algo_xsr15.fg, Type: Algorithm, Rev: 0.1.40.0, Algo: XSR 1.5
Flashbus Write baud set to 4.0Mbits
Transmission Mode Requested: Dual Line, 32 bit, Accepted: Dual Line, 32 bit
Box TX2 Data Pin set to: Service Pin 3
Flashbus Write baud set to 4.0Mbits
Box VPP disabled
Internal CMT Phone VPP Enabled
PAPUBKEYS Hash for CMT: A4182F8DC2FFE3137CF7C7CC0BB90D0B7151AF4A
Sending Certificates...
Certificates OK
Started group flash erase
EraseArea[0,CMT]: 0x00000000-0x000006BF, NOR
EraseArea[0,CMT]: 0x000006C0-0x000BFFFF, NOR
EraseArea[0,CMT]: 0x000C0000-0x000D7FFF, NOR
EraseArea[0,CMT]: 0x000D8000-0x000DFFFF, NOR
EraseArea[0,CMT]: 0x00100000-0x001FFFFF, NOR
EraseArea[0,CMT]: 0x00200000-0x002DFFFF, NOR
EraseArea[0,CMT]: 0x002E0000-0x00EFFFFF, NOR
EraseArea[0,CMT]: 0x01500000-0x0157FFFF, NOR
EraseArea[0,CMT]: 0x01580000-0x015FFFFF, NOR
Waiting 320s for erasure finish...
Erase taken 36.313s
Writing all blocks...
Writing CMT NOLO Certificate...
Writing CMT KEYS Certificate...
Writing CMT PRIMAPP Certificate...
Writing CMT PASUBTOC Certificate...
Writing CMT PAPUBKEYS Certificate...
Writing CMT UPDAPP Certificate...
Writing CMT DSP0 Certificate...
Writing CMT MCUSW Certificate...
Writing CMT PMM_CONF Certificate...
Writing CMT SBIF_CONF Certificate...
Programming Status OK!
All blocks written OK! Time taken 378.484s
Restarting MCU...
Processing rm164__04.00.mcusw (APE)...
Processing rm164__04.00.ppm_i (CMT)...
Booting RAP...
CMT_SYSTEM_ASIC_ID:	 000000010000022600010006010C192101001101
CMT_EM_ASIC_ID:		 00000232
CMT_EM_ASIC_ID:		 00000353
CMT_PUBLIC_ID:		 2BA0010ADCCA6C566D20A2477760DAB595E7171F
CMT_ASIC_MODE_ID:	 00
CMT_ROOT_KEY_HASH:	 BAF3A9C3DBFA8454937DB77F2B8852B1
CMT_ROM_ID:		 191EC665DFAAF68F
rm164__04.00.ppm_i, Type: Flash Image, Algo: BB5, XSR 1.5
RAP3Gv3_2nd.fg, Type: 2nd Boot Loader, Rev: 0.1.30.0, Algo: BB5
Flashbus Write baud set to 3.25Mbits
Flashbus Read baud set to 98Kbits
FlashChip[0,CMT]: 0x00EC220800008D21, Samsung, NOR
FlashChip[0,CMT]: 0x00EC003000000121, Samsung, ONENAND
Requested Algorithm: XSR 1.5 (CMT)
FlashContent[0,CMT]: 00000000000000000000000000000000, NOR
FlashChip[0,CMT]: 0xFFFF000000000000, Unknown, MMC
Transmission Mode Requested: Single Line, 8 bit, Accepted: Single Line, 8 bit
RAP3Gv3_algo_xsr15.fg, Type: Algorithm, Rev: 0.1.40.0, Algo: XSR 1.5
Flashbus Write baud set to 4.0Mbits
Transmission Mode Requested: Dual Line, 32 bit, Accepted: Dual Line, 32 bit
Box TX2 Data Pin set to: Service Pin 3
Flashbus Write baud set to 4.0Mbits
Box VPP disabled
Internal CMT Phone VPP Enabled
PAPUBKEYS Hash for CMT: A4182F8DC2FFE3137CF7C7CC0BB90D0B7151AF4A
Started group flash erase
EraseArea[0,CMT]: 0x00F00000-0x014FFFFF, NOR
Waiting 320s for erasure finish...
Erase taken 13.360s
Writing all blocks...
Programming Status OK!
All blocks written OK! Time taken 143.172s
Restarting MCU...
Processing rm164__04.00.ppm_i (APE)...
Processing rm164__04.00.image_ctv_ru (CMT)...
Booting RAP...
CMT_SYSTEM_ASIC_ID:	 000000010000022600010006010C192101001101
CMT_EM_ASIC_ID:		 00000232
CMT_EM_ASIC_ID:		 00000353
CMT_PUBLIC_ID:		 2BA0010ADCCA6C566D20A2477760DAB595E7171F
CMT_ASIC_MODE_ID:	 00
CMT_ROOT_KEY_HASH:	 BAF3A9C3DBFA8454937DB77F2B8852B1
CMT_ROM_ID:		 191EC665DFAAF68F
rm164__04.00.image_ctv_ru, Type: Flash Image, Algo: BB5, XSR 1.5
RAP3Gv3_2nd.fg, Type: 2nd Boot Loader, Rev: 0.1.30.0, Algo: BB5
Flashbus Write baud set to 3.25Mbits
Flashbus Read baud set to 98Kbits
FlashChip[0,CMT]: 0x00EC220800008D21, Samsung, NOR
FlashChip[0,CMT]: 0x00EC003000000121, Samsung, ONENAND
Requested Algorithm: XSR 1.5 (CMT)
FlashContent[0,CMT]: 00000000000000000000000000000000, NOR
FlashChip[0,CMT]: 0xFFFF000000000000, Unknown, MMC
Transmission Mode Requested: Single Line, 8 bit, Accepted: Single Line, 8 bit
RAP3Gv3_algo_xsr15.fg, Type: Algorithm, Rev: 0.1.40.0, Algo: XSR 1.5
Flashbus Write baud set to 4.0Mbits
Transmission Mode Requested: Dual Line, 32 bit, Accepted: Dual Line, 32 bit
Box TX2 Data Pin set to: Service Pin 3
Flashbus Write baud set to 4.0Mbits
Box VPP disabled
Internal CMT Phone VPP Enabled
PAPUBKEYS Hash for CMT: A4182F8DC2FFE3137CF7C7CC0BB90D0B7151AF4A
Partitioning...
Partitioning OK
Started group flash erase
Erase Partition (CMT)
Waiting 320s for erasure finish...
Erase taken 2.437s
Writing all blocks...
Programming Status OK!
All blocks written OK! Time taken 16.719s
Restarting MCU...
Processing rm164__04.00.image_ctv_ru (APE)...
All images processed OK! Processing post flash tasks...
Setting Factory Defaults...
Factory defaults OK
Reading info...
MCU Version	V 04.00
MCU Date	06-09-07
Product		RM-164
Manufacturer	(c) Nokia.           
IMEI		356287011*****
IMEI Spare	3A65820711921908
IMEI SV		3365820711921908F7000000
PPM		V 04.00, 06-09-07, RM-164, (c) Nokia.           , I
CNT		Content: ctv_ru, V 04.00, 06-09-07, RM-164, (c) Nokia.           , 
PSN		MYG740766
Product Code	0546145
Module Code	0203066
Basic Product Code	0532835
PSD		0000001D00000000
RETU		32
TAHVO		53
AHNE		11
HW		4000
RFIC		17211721
DSP		rm164_dsprap_pb05wk46v31_02
Simlock Server	SIMLOCK SERVER VERSION 63
Simlock Key	2440700000000000
Simlock Profile	8000000000000000
Simlock Key Cnt	0
Simlock FBUS Cnt	0
Read info thread finished, continuing...
Post flash tasks finished!
Flashing successfully finished!

Last edited by ptt; 01-17-2010 at 00:52. Reason: add code tag
  Reply With Quote
 
Page generated in 0.09368 seconds with 7 queries