View Single Post
Old 04-24-2009, 20:35   #44 (permalink)
UnlockingLab
Banned
 
Join Date: May 2007
Location: UK
Posts: 339
Member: 517371
Status: Offline
Sonork: 100.112658
Thanks Meter: 802
5310 Flashing successfully

Code:
Processing pre flash tasks...
Backing up certificates...
Booting RAP...
Failed to Read All Certificates -> RAP Not Responding
Certificates backup thread finished, continuing...
Backing up simlock...
Simlock backup problem -> Phone not detected
Backup simlock thread finished, continuing...
Pre flash tasks finished, continuing...
Processing rm303__09.42.mcusw (CMT)...
Booting RAP...
Processing Flash Image Failed -> RAP Not Responding
Failed to Process all Image files -> Failed to process rm303__09.42.mcusw
Processing pre flash tasks...
Backing up certificates...
Booting RAP...
CMT_SYSTEM_ASIC_ID:  000000010000022600010006010C192101013000
CMT_EM_ASIC_ID:   00000295
CMT_EM_ASIC_ID:   00000B22
CMT_PUBLIC_ID:   17B0020D0A280354C5134BF7944D56E3BEED1FBF
CMT_ASIC_MODE_ID:  00
CMT_ROOT_KEY_HASH:  BAF3A9C3DBFA8454937DB77F2B8852B1
CMT_ROM_ID:   273F6D55DFAAF68F
RAP3Gv3_2nd.fg, Type: 2nd Boot Loader, Rev: 0.1.30.0, Algo: BB5
Flashbus Write baud set to 1.0Mbits
Flashbus Read baud set to 98Kbits
FlashChip[0,CMT]: 0x00EC220C00008921, Samsung, NOR
FlashContent[0,CMT]: 00000000000000000000000000000000, NOR
FlashChip[0,CMT]: 0xFFFF000000000000, Unknown, MMC
Transmission Mode Requested: Single Line, 8 bit, Accepted: Single Line, 8 bit
RAP3Gv3_algo.fg, Type: Algorithm, Rev: 0.1.40.0, Algo: BB5 ALGORITHM
Flashbus Write baud set to 4.0Mbits
Transmission Mode Requested: Dual Line, 32 bit, Accepted: Dual Line, 32 bit
Box TX2 Data Pin set to: Service Pin 3
Box VPP disabled
Internal CMT Phone VPP Enabled
PAPUBKEYS Hash for CMT: 3E96DE4212587183E5E16BB2C79692A53C19875D
APE Subsystem Not Found
CMT NPC Ok
CMT HWC Ok
CMT CCC Ok
CMT R&D Ok
CMT VARIANT Not Found
CMT PAPUBKEYS Ok
CMT KEYS Ok
Restarting MCU...
Read all certificates finished
Certificates backup thread finished, continuing...
Backing up simlock...
Simlock backup problem -> Phone not detected
Backup simlock thread finished, continuing...
Pre flash tasks finished, continuing...
Processing rm303__09.42.mcusw (CMT)...
Booting RAP...
CMT_SYSTEM_ASIC_ID:  000000010000022600010006010C192101013000
CMT_EM_ASIC_ID:   00000295
CMT_EM_ASIC_ID:   00000B22
CMT_PUBLIC_ID:   17B0020D0A280354C5134BF7944D56E3BEED1FBF
CMT_ASIC_MODE_ID:  00
CMT_ROOT_KEY_HASH:  BAF3A9C3DBFA8454937DB77F2B8852B1
CMT_ROM_ID:   273F6D55DFAAF68F
rm303__09.42.mcusw, Type: Flash Image, Algo: BB5, BB5 ALGORITHM
RAP3Gv3_2nd.fg, Type: 2nd Boot Loader, Rev: 0.1.30.0, Algo: BB5
Flashbus Write baud set to 3.25Mbits
Flashbus Read baud set to 98Kbits
FlashChip[0,CMT]: 0x00EC220C00008921, Samsung, NOR
FlashContent[0,CMT]: 00000000000000000000000000000000, NOR
FlashChip[0,CMT]: 0xFFFF000000000000, Unknown, MMC
Transmission Mode Requested: Single Line, 8 bit, Accepted: Single Line, 8 bit
RAP3Gv3_algo.fg, Type: Algorithm, Rev: 0.1.40.0, Algo: BB5 ALGORITHM
Flashbus Write baud set to 4.0Mbits
Transmission Mode Requested: Dual Line, 32 bit, Accepted: Dual Line, 32 bit
Box TX2 Data Pin set to: Service Pin 3
Flashbus Write baud set to 4.0Mbits
Box VPP disabled
Internal CMT Phone VPP Enabled
PAPUBKEYS Hash for CMT: 3E96DE4212587183E5E16BB2C79692A53C19875D
Sending Certificates...
Certificates OK
Started group flash erase
EraseArea[0,CMT]: 0x00000000-0x000006BF, NOR
EraseArea[0,CMT]: 0x000006C0-0x0001FFFF, NOR
EraseArea[0,CMT]: 0x00040000-0x000BFFFF, NOR
EraseArea[0,CMT]: 0x000C0000-0x0013FFFF, NOR
EraseArea[0,CMT]: 0x00140000-0x010DFFFF, NOR
EraseArea[0,CMT]: 0x010E0000-0x0121FFFF, NOR
Waiting 320s for erasure finish...
Erase taken 6.610s
Writing all blocks...
Writing CMT NOLO Certificate...
Writing CMT KEYS Certificate...
Writing CMT PRIMAPP Certificate...
Writing CMT PASUBTOC Certificate...
Writing CMT PAPUBKEYS Certificate...
Writing CMT UPDAPP Certificate...
Writing CMT DSP0 Certificate...
Writing CMT MCUSW Certificate...
Programming Status OK!
All blocks written OK! Time taken 562.828s
Restarting MCU...
Processing rm303__09.42.mcusw (APE)...
Processing rm303__09.42.ppm_c (CMT)...
Booting RAP...
CMT_SYSTEM_ASIC_ID:  000000010000022600010006010C192101013000
CMT_EM_ASIC_ID:   00000295
CMT_EM_ASIC_ID:   00000B22
CMT_PUBLIC_ID:   17B0020D0A280354C5134BF7944D56E3BEED1FBF
CMT_ASIC_MODE_ID:  00
CMT_ROOT_KEY_HASH:  BAF3A9C3DBFA8454937DB77F2B8852B1
CMT_ROM_ID:   273F6D55DFAAF68F
rm303__09.42.ppm_c, Type: Flash Image, Algo: BB5, BB5 ALGORITHM
RAP3Gv3_2nd.fg, Type: 2nd Boot Loader, Rev: 0.1.30.0, Algo: BB5
Flashbus Write baud set to 3.25Mbits
Flashbus Read baud set to 98Kbits
FlashChip[0,CMT]: 0x00EC220C00008921, Samsung, NOR
FlashContent[0,CMT]: 00000000000000000000000000000000, NOR
FlashChip[0,CMT]: 0xFFFF000000000000, Unknown, MMC
Transmission Mode Requested: Single Line, 8 bit, Accepted: Single Line, 8 bit
RAP3Gv3_algo.fg, Type: Algorithm, Rev: 0.1.40.0, Algo: BB5 ALGORITHM
Flashbus Write baud set to 4.0Mbits
Transmission Mode Requested: Dual Line, 32 bit, Accepted: Dual Line, 32 bit
Box TX2 Data Pin set to: Service Pin 3
Flashbus Write baud set to 4.0Mbits
Box VPP disabled
Internal CMT Phone VPP Enabled
PAPUBKEYS Hash for CMT: 3E96DE4212587183E5E16BB2C79692A53C19875D
Started group flash erase
EraseArea[0,CMT]: 0x01220000-0x0189FFFF, NOR
Waiting 320s for erasure finish...
Erase taken 18.234s
Writing all blocks...
Programming Status OK!
All blocks written OK! Time taken 211.375s
Restarting MCU...
Processing rm303__09.42.ppm_c (APE)...
Processing rm303__09.42.image_c_uk_red (CMT)...
Booting RAP...
CMT_SYSTEM_ASIC_ID:  000000010000022600010006010C192101013000
CMT_EM_ASIC_ID:   00000295
CMT_EM_ASIC_ID:   00000B22
CMT_PUBLIC_ID:   17B0020D0A280354C5134BF7944D56E3BEED1FBF
CMT_ASIC_MODE_ID:  00
CMT_ROOT_KEY_HASH:  BAF3A9C3DBFA8454937DB77F2B8852B1
CMT_ROM_ID:   273F6D55DFAAF68F
rm303__09.42.image_c_uk_red, Type: Flash Image, Algo: BB5, BB5 ALGORITHM
RAP3Gv3_2nd.fg, Type: 2nd Boot Loader, Rev: 0.1.30.0, Algo: BB5
Flashbus Write baud set to 3.25Mbits
Flashbus Read baud set to 98Kbits
FlashChip[0,CMT]: 0x00EC220C00008921, Samsung, NOR
FlashContent[0,CMT]: 00000000000000000000000000000000, NOR
FlashChip[0,CMT]: 0xFFFF000000000000, Unknown, MMC
Transmission Mode Requested: Single Line, 8 bit, Accepted: Single Line, 8 bit
RAP3Gv3_algo.fg, Type: Algorithm, Rev: 0.1.40.0, Algo: BB5 ALGORITHM
Flashbus Write baud set to 4.0Mbits
Transmission Mode Requested: Dual Line, 32 bit, Accepted: Dual Line, 32 bit
Box TX2 Data Pin set to: Service Pin 3
Flashbus Write baud set to 4.0Mbits
Box VPP disabled
Internal CMT Phone VPP Enabled
PAPUBKEYS Hash for CMT: 3E96DE4212587183E5E16BB2C79692A53C19875D
Started group flash erase
EraseArea[0,CMT]: 0x018A0000-0x01B1FFFF, NOR
EraseArea[0,CMT]: 0x01B20000-0x03FBFFFF, NOR
Waiting 320s for erasure finish...
Erase taken 112.860s
Writing all blocks...
Programming Status OK!
All blocks written OK! Time taken 279.453s
Restarting MCU...
Processing rm303__09.42.image_c_uk_red (APE)...
All images processed OK! Processing post flash tasks...
Setting Factory Defaults...
Factory defaults OK
Reading info...
MCU Version V 09.42
MCU Date 07-11-08
Product  RM-303
Manufacturer (c) Nokia            
IMEI  356817026669066
IMEI Spare 3A65180762660906
IMEI SV  3365180762660966F1000000
PPM  V 09.42, 07-11-08, RM-303, (c) Nokia            , C
CNT  Content: c_uk_red, V 09.42, 07-11-08, RM-303, (c) Nokia            , 
PSN  KIR936064
Product Code 0556508
Module Code 0203414
Basic Product Code 0544850
PSD  0000000000000000
LPSN  0
RETU  15
TAHVO  22
AHNE  30
HW  2013
RFIC  064c0609
DSP  ICPR71_08w30
LCD  SEIKO
BT  2222-143
ADSP Sw  2222-143
Simlock Server SIMLOCK SERVER
Simlock Key 2341000000000000
Simlock Profile 8000000000000006
Simlock Key Cnt 0
Simlock FBUS Cnt 0
Read info thread finished, continuing...
Post flash tasks finished!
Flashing successfully finished!

Last edited by ptt; 01-17-2010 at 00:52. Reason: add code tag
 
 
Page generated in 0.07728 seconds with 7 queries