Hello my friend !!
First check that your accu is loaded fully up !
(((((this u make if u get message ERROR! after flashing in ER2000 !! then open look if pin 7 and 8 are closed !! On connector to phone. PIN 1 is the left if keyborad is above.)))))
The use ER2000 and press FLASH without choosing a BIN File !! OKAY !! Try this three up to five times and it shall run.
Blank checking means, that your phone wasn't able to erase flash because it has not enough power. If this doesn't work try to use external power (9 up to 12 V) too. Maybe transformator has enough power.
|