| [QUOTE=tommyvo;4569907]HI!
Today I try to unlock Nokia n95, I used TX2 adaptor + TMA adaptor and 7 pin cable.However Test mode NEVER come up.
I have to click on " CHECK FLASHING BUS" TO FORCE PHONE TO LOCAL MODE. AFTER THAT I CAN READ PHONE INFO.
AFTER THAT, I CLICK ON UNLOCK AND PHONE PROCESSING TO UNLOCK. HOWEVER
imlock Key Cnt 0
Simlock FBUS Cnt 0
Simlock[1,1] State: CLOSED Type: MCC-MNC Data: 50506F
Simlock[2,1] State: CLOSED Type: MCC-MNC Data: 50599F
Simlock[3,1] State: CLOSED Type: MCC-MNC Data: 50506F
Simlock[4,1] State: CLOSED Type: MCC-MNC Data: 50599F
Simlock[5,1] State: CLOSED Type: MCC-MNC Data: 00101F
Simlock[6,1] State: CLOSED Type: MCC-MNC Data: 00101F
Reading Security Block...
Security block OK!
Determining PA Simlock...
Booting RAP...
APE_SYSTEM_ASIC_ID: 24200705
APE_ASIC_MODE_ID: 00
APE_PUBLIC_ID: 154989EEF77CF48E1CA6491DF3C4FA53E911CB71
APE_ROOT_KEY_HASH: BA8710A7E1CD5A2909B9A875DB27AA2400000000
CMT_SYSTEM_ASIC_ID: 000000010000022600010006400C192101021103
CMT_EM_ASIC_ID: 00000295
CMT_EM_ASIC_ID: 00000B22
CMT_PUBLIC_ID: 22400105DC740058DC6AC86A28A8C1C8E202A9D5
CMT_ASIC_MODE_ID: 00
CMT_ROOT_KEY_HASH: CAEEBB65D3C48E6DC73B49DC5063A2EE
CMT_ROM_ID: A8C1D6713E691FF8
RAPIDOv11_2nd.fg, Type: 2nd Boot Loader, Rev: 0.1.37.1, Algo: BB5
Flashbus Write baud set to 1.0Mbits
Flashbus Read baud set to 98Kbits
FlashChip[0,CMT]: 0x0001003500006921, AMD, NOR
FlashContent[0,CMT]: 00000000000000000000000000000000, NOR
FlashChip[0,CMT]: 0xFFFF000000000000, Unknown, MMC
Transmission Mode Requested: Single Line, 8 bit, Accepted: Single Line, 8 bit
RAPIDOv11_algo.fg, Type: Algorithm, Rev: 0.1.35.0, Algo: XSR 1.5
Flashbus Write baud set to 4.0Mbits
Transmission Mode Requested: Dual Line, 32 bit, Accepted: Dual Line, 32 bit
Box TX2 Data Pin set to: Service Pin 3
Box VPP disabled
Internal CMT Phone VPP Enabled
PAPUBKEYS Hash for CMT: 25129A39D9A3B031CA0124E1E90F5A17ED3EFC89
APE Boot skipped on user request
Restarting MCU...
Determined PA Simlock: PA_SL
Checking for Rootkey Hash support...
Restarting MCU...
Booting RAP...
APE_SYSTEM_ASIC_ID: 24200705
APE_ASIC_MODE_ID: 00
APE_PUBLIC_ID: 154989EEF77CF48E1CA6491DF3C4FA53E911CB71
APE_ROOT_KEY_HASH: BA8710A7E1CD5A2909B9A875DB27AA2400000000
CMT_SYSTEM_ASIC_ID: 000000010000022600010006400C192101021103
CMT_EM_ASIC_ID: 00000295
CMT_EM_ASIC_ID: 00000B22
CMT_PUBLIC_ID: 22400105DC740058DC6AC86A28A8C1C8E202A9D5
CMT_ASIC_MODE_ID: 00
CMT_ROOT_KEY_HASH: CAEEBB65D3C48E6DC73B49DC5063A2EE
CMT_ROM_ID: A8C1D6713E691FF8
RAPIDOv11_2nd.fg, Type: 2nd Boot Loader, Rev: 0.1.30.0, Algo: BB5
Flashbus Write baud set to 1.0Mbits
Flashbus Read baud set to 98Kbits
Exploiting - running preloader...
Preloader running OK, Running Custom Loader...
Custom loader running OK! Working...
Received Security Block OK !
Writing Security Block...
BB5 Unlock Failed -> Phone not detected (FBUS)
THE REASON IS PHONE IS NOT STABLE ON LOCAL MODE SO IT CAN NOT UNLOCK ANYMORE.
PLEASE HELP ME ANY IDEA
THANKS
TOMMY[/QUOT
Bro,Try to change the value of BSI on TMA adaptor.If the phone can not go into local mode,you can't unlock it.[ or remove camera and try again] |