GSM-Forum - View Single Post

sharmin · 06-25-2009, 20:24

Here is the tested way for 1209 CS
In 1209 most people face contact service problem, because while flashing with fbus cable most phone fail to go in local mode coz the power which comes from fbus cable is not sufficient to turn phone in local mode. so use a easy cable with batterry full erase, full flash , write pm and finally unlock. if anything goes wrong in middle it must be definately hardware problem (Originally posted by bhuvanele)
and for CS check first :- ''1St know about contact service .Read info if PM area show blank its a soft problem. If show config -FFFFFFFFFFFFF it is Soft Problem. If set Show net lock it is Soft Problem. If info show idel it is Hard problem''(Posted by Srinibas)
Truely easy cable is best for this type of set than Fbus cable ...

06-25-2009, 20:24	#4 (permalink)
sharmin No Life Poster Join Date: Jan 2006 Location: Mirpur-1, Dhaka,Bangladesh Posts: 1,786 Member: 222009 Status: Offline Sonork: 100.1576751 Thanks Meter: 435	Here is the tested way for 1209 CS In 1209 most people face contact service problem, because while flashing with fbus cable most phone fail to go in local mode coz the power which comes from fbus cable is not sufficient to turn phone in local mode. so use a easy cable with batterry full erase, full flash , write pm and finally unlock. if anything goes wrong in middle it must be definately hardware problem (Originally posted by bhuvanele) and for CS check first :- ''1St know about contact service .Read info if PM area show blank its a soft problem. If show config -FFFFFFFFFFFFF it is Soft Problem. If set Show net lock it is Soft Problem. If info show idel it is Hard problem''(Posted by Srinibas) Truely easy cable is best for this type of set than Fbus cable ...