| No Life Poster
Join Date: Jan 2006 Location: Pakistan
Posts: 15,094
Member: 226457
Status: Offline Sonork: No more used Thanks Meter: 14,934 | 2310 Flashing Unlocking Successfully Code: Initializing FBUS...
All initialized - Ready to work
Booting UPP...
UPP ID: 2201 [HW_UPP2M_v2]
Flashbus Write baud set to 100Kbits
u_2nd.fia, Type: 2nd Boot Loader, Rev: 7.4.77.0, Algo: DCT4
2nd Boot Loading Failed -> No answer from 2nd Boot Loader (FF)
Failed to Check DCT4 Flashing Bus -> Problem with sending 2nd Boot Loader
Booting UPP...
UPP ID: 2201 [HW_UPP2M_v2]
Flashbus Write baud set to 100Kbits
u_2nd.fia, Type: 2nd Boot Loader, Rev: 7.4.77.0, Algo: DCT4
PLL Factor: 3
FlashChip[0]: 0x00898872 @ 0x01000000, Intel, SectorSize: 64kB, Ext: 00000121
Signature: AD7EB61A1BBE0BE27D586BE4DBEE6514
Flashbus Write baud set to 1.0Mbits
Flashbus Read baud set to 4Kbits
u_intel.fia, Type: Algorithm, Target: FlashChip[0] 0x00898872 (32Mbits), Rev: 7.4.77.0, Algo: DCT4 ALGORITHM
Nominal VPP Voltage: 9V, Detected: 1.48V
Terminating flash session
Boot operation took 5.485s
Check Flashing Bus finished
Scanning avaiable products...
Processing C:\Program Files\Nokia\Phoenix\Products\...
Processing C:\Program Files\Common Files\Nokia\DataPackage\Products\...
Found 43 products, Filtering DCT4 Products - wait...
7 Products left after filtering. Ready.
Scanning avaiable products...
Processing C:\Program Files\Nokia\Phoenix\Products\...
Processing C:\Program Files\Common Files\Nokia\DataPackage\Products\...
Found 44 products, Filtering DCT4 Products - wait...
7 Products left after filtering. Ready.
Processing pre-flash tasks...
Backing up Flash IMEI...
Failed to backup Flash IMEI, but continuing
Pre-flash tasks finished
Booting UPP...
UPP ID: 2201 [HW_UPP2M_v2]
rm189_03.310, Type: Flash Image, Algo: DCT4, DCT4 ALGORITHM
Flashbus Write baud set to 100Kbits
u_2nd.fia, Type: 2nd Boot Loader, Rev: 7.4.77.0, Algo: DCT4
Box VPP disabled
Internal Phone VPP Selected
PLL Factor: 3
FlashChip[0]: 0x00898872 @ 0x01000000, Intel, SectorSize: 64kB, Ext: 00000121
Signature: AD7EB61A1BBE0BE27D586BE4DBEE6514
Flashbus Write baud set to 1.0Mbits
Flashbus Read baud set to 51Kbits
u_intel.fia, Type: Algorithm, Target: FlashChip[0] 0x00898872 (32Mbits), Rev: 7.4.77.0, Algo: DCT4 ALGORITHM
Nominal VPP Voltage: 9V, Detected: 1.48V
MSID-Crypted: 84E6DB50EE4D3E296C5632C2E1
MSID-Plain: 3E4EBAE900C330D1A8000000
FAID-Crypted: 909C2EB936E6356ABC22D509
Flashbus Write baud set to 6.50Mbits
5 Region(s) to erase
Erasing NOR Region [0x01000000-0x0100FFFF]
Erasing NOR Region [0x01010000-0x013BFFFF]
Erasing NOR Region [0x013C0000-0x013EFFFF]
Erasing NOR Region [0x017C0000-0x017EFFFF]
Erasing NOR Region [0x01FC0000-0x01FEFFFF]
Erase taken 38.422s
Writing 124 blocks...
All blocks written OK! Time taken 16.985s
Terminating flash session
Box VPP disabled
Booting UPP...
UPP ID: 2201 [HW_UPP2M_v2]
rm1890_nai3.31ia, Type: Flash Image, Algo: DCT4, DCT4 ALGORITHM
Flashbus Write baud set to 100Kbits
u_2nd.fia, Type: 2nd Boot Loader, Rev: 7.4.77.0, Algo: DCT4
Box VPP disabled
Internal Phone VPP Selected
PLL Factor: 3
FlashChip[0]: 0x00898872 @ 0x01000000, Intel, SectorSize: 64kB, Ext: 00000121
Signature: AD7EB61A1BBE0BE27D586BE4DBEE6514
Flashbus Write baud set to 1.0Mbits
Flashbus Read baud set to 51Kbits
u_intel.fia, Type: Algorithm, Target: FlashChip[0] 0x00898872 (32Mbits), Rev: 7.4.77.0, Algo: DCT4 ALGORITHM
Nominal VPP Voltage: 9V, Detected: 1.52V
MSID-Crypted: 84E6DB50EE4D3E296C5632C2E1
Using MSID-FAID Cache, Not wasting card
FAID-Crypted: 909C2EB936E6356ABC22D509
Flashbus Write baud set to 6.50Mbits
1 Region(s) to erase
Erasing NOR Region [0x01380000-0x013BFFFF]
Erase taken 2.375s
Writing 12 blocks...
All blocks written OK! Time taken 1.656s
Terminating flash session
Extracting Content Package...
CP Server: File Server fake reply for CUI phone.
CP Extract Failed -> CP Not Extracted, Code: 1
WARNING: Failed to extract CP
Box VPP disabled
Booting UPP...
UPP ID: 2201 [HW_UPP2M_v2]
rm189_03.31ia, Type: Flash Image, Algo: DCT4, DCT4 ALGORITHM
Flashbus Write baud set to 100Kbits
u_2nd.fia, Type: 2nd Boot Loader, Rev: 7.4.77.0, Algo: DCT4
Box VPP disabled
Internal Phone VPP Selected
PLL Factor: 3
FlashChip[0]: 0x00898872 @ 0x01000000, Intel, SectorSize: 64kB, Ext: 00000121
Signature: AD7EB61A1BBE0BE27D586BE4DBEE6514
Flashbus Write baud set to 1.0Mbits
Flashbus Read baud set to 51Kbits
u_intel.fia, Type: Algorithm, Target: FlashChip[0] 0x00898872 (32Mbits), Rev: 7.4.77.0, Algo: DCT4 ALGORITHM
Nominal VPP Voltage: 9V, Detected: 1.50V
MSID-Crypted: 84E6DB50EE4D3E296C5632C2E1
Using MSID-FAID Cache, Not wasting card
FAID-Crypted: 909C2EB936E6356ABC22D509
Flashbus Write baud set to 6.50Mbits
2 Region(s) to erase
Erasing NOR Region [0x011E0000-0x011EFFFF]
Erasing NOR Region [0x011F0000-0x0137FFFF]
Erase taken 15.593s
Writing 93 blocks...
All blocks written OK! Time taken 12.797s
Terminating flash session
Box VPP disabled
Processing post-flash tasks...
Setting Factory Defaults...
Factory defaults OK
Unlocking...
MCU Version V 3.31
MCU Date 29-08-06
Product RM-189
Manufacturer (c) NMP
IMEI 3598
Mastercode 162674665
Warning: Failed to read SP Info, Assuming defaults
Asic 2
HW Signature D5860D948D177F68
Simlock Server
Simlock Key 0010100000000000
Simlock Profile 0000000000010002
Simlock Aux 00025927
Simlock IMEI 000035983
Simlock Key Cnt 0
Simlock FBUS Cnt 0
Selecting unlock method...
Search in: C:\Program Files\Cyclone Box\UnlockData\
Searching for: RM-189_V 3.31.unlock_img
Asking card to sign HW Signature...
Signed OK (C55E83DB82E66814EDD426128F07742FA3638385)
Writing patch file...
Booting UPP...
UPP ID: 2201 [HW_UPP2M_v2]
shadow, Type: Flash Image, Algo: DCT4, DCT4 ALGORITHM
Flashbus Write baud set to 100Kbits
u_2nd.fia, Type: 2nd Boot Loader, Rev: 7.4.77.0, Algo: DCT4
Box VPP disabled
Internal Phone VPP Selected
PLL Factor: 3
FlashChip[0]: 0x00898872 @ 0x01000000, Intel, SectorSize: 64kB, Ext: 00000121
Signature: AD7EB61A1BBE0BE27D586BE4DBEE6514
Flashbus Write baud set to 1.0Mbits
Flashbus Read baud set to 51Kbits
u_intel.fia, Type: Algorithm, Target: FlashChip[0] 0x00898872 (32Mbits), Rev: 7.4.77.0, Algo: DCT4 ALGORITHM
Nominal VPP Voltage: 9V, Detected: 1.52V
MSID-Crypted: 84E6DB50EE4D3E296C5632C2E1
Using MSID-FAID Cache, Not wasting card
FAID-Crypted: 909C2EB936E6356ABC22D509
Flashbus Write baud set to 6.50Mbits
1 Region(s) to erase
Erasing NOR Region [0x01160000-0x0117FFFF]
Erase taken 1.218s
Writing 8 blocks...
All blocks written OK! Time taken 1.125s
Terminating flash session
Box VPP disabled
Simlock Security - UNKNOWN
Writing SP...
New SP Accepted OK!
Writing restore file...
Booting UPP...
UPP ID: 2201 [HW_UPP2M_v2]
shadow, Type: Flash Image, Algo: DCT4, DCT4 ALGORITHM
Flashbus Write baud set to 100Kbits
u_2nd.fia, Type: 2nd Boot Loader, Rev: 7.4.77.0, Algo: DCT4
Box VPP disabled
Internal Phone VPP Selected
PLL Factor: 3
FlashChip[0]: 0x00898872 @ 0x01000000, Intel, SectorSize: 64kB, Ext: 00000121
Signature: AD7EB61A1BBE0BE27D586BE4DBEE6514
Flashbus Write baud set to 1.0Mbits
Flashbus Read baud set to 51Kbits
u_intel.fia, Type: Algorithm, Target: FlashChip[0] 0x00898872 (32Mbits), Rev: 7.4.77.0, Algo: DCT4 ALGORITHM
Nominal VPP Voltage: 9V, Detected: 1.48V
MSID-Crypted: 84E6DB50EE4D3E296C5632C2E1
Using MSID-FAID Cache, Not wasting card
FAID-Crypted: 909C2EB936E6356ABC22D509
Flashbus Write baud set to 6.50Mbits
1 Region(s) to erase
Erasing NOR Region [0x01160000-0x0117FFFF]
Erase taken 1.250s
Writing 8 blocks...
All blocks written OK! Time taken 1.109s
Terminating flash session
Box VPP disabled
Phone unlocked OK!
Unlock thread finished, continuing...
Post-flash tasks finished...
Flash successfully finished!
Last edited by ptt; 01-17-2010 at 15:10.
Reason: add code tag
|