| w395 unlocked ok.
hi, i was having trouble unlocking this phone,i kept getting 'power on button shortly' message but se tools would not go any further.
do not identify first(this what i had been doing) of course its a w395
go to settings
'signed mode' and 'perform full unlock instead of'
use your correct com port and rj cable instead of the dcu cable.
THEN if you wish press identify,then press unlock.
here is my log, please note the 'proceedure was stopped by user' part was because i had the wrong com port assigned !!!!
v0.915038/UNI
CARD SERIAL: 000886XX
Loaded 51 flash descriptors
SIGNED MODE (USING SERVER)
CFG:100000100000000
PLEASE ATTACH TURNED OFF PHONE NOW
PRESS "POWER ON" BUTTON SHORTLY...
PROCEDURE WAS STOPPED BY USER
supported phone was not detected
Can't load ID loader !
Elapsed: 168 secs.
SIGNED MODE (USING SERVER)
CFG:100000100000000
PLEASE ATTACH TURNED OFF PHONE NOW
PRESS "POWER ON" BUTTON SHORTLY...
PROCEDURE WAS STOPPED BY USER
supported phone was not detected
FAILED TO SETUP PHONE
Elapsed: 56 secs.
SIGNED MODE (USING SERVER)
CFG:100000100000000
PLEASE ATTACH TURNED OFF PHONE NOW
PRESS "POWER ON" BUTTON SHORTLY...
EROM "R7A024" CID: 0001
SOFTWARE CID: 0001
SIMLOCK STATE: "NOT_TAMPERED"
LOADER AID: 0002
LOADER VERSION: "R3A009"
PHONE IMEI:35236203154749
MODEL (from GDFS): W395
FACTORY CXC: 1207-7713 R7A024
CURRENT CXC: 12175563_R1CB009
CURRENT CDA: 1223-4226_R4A
CURRENT FS: 12182023_FS_WESTERN-EUROPE_HS_YO_R1CB009
LANGUAGE: AL
Elapsed: 22 secs.
SIGNED MODE (USING SERVER)
CFG:100000100000000
PLEASE ATTACH TURNED OFF PHONE NOW
PRESS "POWER ON" BUTTON SHORTLY...
EROM "R7A024" CID: 0001
SOFTWARE CID: 0001
SIMLOCK STATE: "NOT_TAMPERED"
LOADER AID: 0002
LOADER VERSION: "R3A009"
PHONE IMEI:352362031547XX
MINOR ERROR "MISC_ERROR (No_such_unit)" IN "MISC_CLASS"
Checking for EROM signature...
Waiting for calculation process...
RESPONSE: "SUCCESS" (2331)
GOT SEED:55D5CE97DAE3D0A6F4F429F2
P96 AUTH PASSED
Unlock DONE
Elapsed: 39 secs.
hope this helps, steve.
' |