View Single Post
Old 08-24-2009, 18:44   #5 (permalink)
nizamudin
Junior Member
 
Join Date: Jan 2006
Posts: 5
Member: 221676
Status: Offline
Thanks Meter: 5
Quote:
Originally Posted by moulnisky View Post
First thing go in the post http://forum.gsmhosting.com/vbb/showthread.php?t=705358
and check if you have the last version of the software and of the firmware: if not just reinstall the suite and/or update the box.
How to move with cyclone working on BB5 mobiles
Connect the TX2 adapter to the box and the fbus cable to the TX2 adapter (The TX2 adapter is the yellow cable in bundle with the box)
Start always, once connected the mobile and started the module DCT4/WD2/BB5 reading the infos
If you can get the infos, OK; If you can't go in the tab BB5/Flash and click on check flashing bus (This will take the mobile in needed mode)
In the tab Common/Info click on read PM (This will give you a back-up of your full PM and will test if the connection of the Fbus cable is OK)
Go now in the tab BB5/security and Click on "create RPL from PHONE" (This will give you a plain RPL of the phone)
Now you have a complete back-up of your mobile
If you are going to do any job as downgrading or erase, better you click on "read certs". this will give you a complete back-up of all the mobile certificates.
Now have a check at your tools:
If you use the TMA cable standard (the one with the USB cable) go in the tab BB5/Flash and Thick where says "SKIP repower on BOOT"
If you are using TMA Evolution or you are working without any TMA "SKIP repower on BOOT" must be not thicked.
Go back in the BB5/security Tab.
If the mobile is an old SL1 Thick where says "skip read SP Info"
for the SL2 leave it not thicked
SX4 bypass must be not thicked
Click on unlock
If the software ask you to calculate the codes (This happen with the SL2 mobiles) wait 10 seconds for the mobile being in local mode (if it is not press power on on the mobile and wait 10 more seconds) and click on yes
If the procedure hangs after the codes being calculated just input the code (7) via keyboard in the mobile.
If the software doesn't ask to calculate the codes, the procedure will go up to the end of the unlock procedure.
This is all

BR

Alex
XCELLENT TIPS/GUIDE..

no-one can give guide like this,otherthan alex..

now,even my daughter..can unlock with cyclone box

keep going..
good luck
 
The Following 5 Users Say Thank You to nizamudin For This Useful Post:
Show/Hide list of the thanked
 
Page generated in 0.06551 seconds with 7 queries