GSM-Forum - View Single Post

turca · 02-20-2010, 18:03

My cell is dead after format I flash my cell but is dead format is dead help, I have backup my firmware but dead:

COM3 [VCP1] selected
module v3.09
Device: Autodetect 6228-6239 NAND
Checking data, wait...
Action: reset settings ("format ffs") NAND
interface: BROM_DLL_v3.936.00
Connect...
Phone should be Switched OFF !
Press and HOLD Power button now !
Connecting...
Booting...
Release Power button now !
bootcode current/expected: 3.2/3.2
CPU: 6235:8A04:8A01
status: FF
bbchip bl ver: FE
NOR flash chip: not installed
NAND flash id[0017]: 00AD:007600AD0076 [HYNIX] HY27XS08121M
chip size: 64Mb
page/spare size: 0200/0010
pages/block: 0020
bits i/o: 08
address cycles: 04
internal RAM size: 00010000
external RAM: absent
done
Set baudrate (921600)...
done
ram test...
testing...
ram test passed
===> detect existing firmware structure...
detect ffs...
ffs offset/size: 03000000/01000000
firmware size: 48Mb
ffs size: 16Mb
detect sec ro...
detect custom parameters...
detect project-id...
project-id: E706_XZY1IPHONE.01.0
detect NAND info...
number of areas to read: 1
reading (HW_STORAGE_NAND NUTL_READ_PAGE_ONLY)...
nfi area detection...
external bootloader is not present
bootloader version: E706_BOOTLOADER_V005_MT6235B_01_1.bin
warning: id-page1 area is invalid
nfi area detection finished: failed
TCL-ID detection...
TCL-ID detection done
startup code area #1 detection...
startup code area #1 detection done
rom info ver: 05
sw version: E706_XZY1IPHONE_PCB01_GPRS_MT6235B_S01.01_0.BIN
project-id: E706_XZY1IPHONE.01.0, 00000000
code offset: 00000000
ffs offset/size [01]: 03000000/01000000
rom info structure: 2nd [standard] generation
TCL-ID is absent
===> done
Format (HW_STORAGE_NAND)...
Disconnect...
done
Finished, time used: 1 min 23 sec
Remove/Install battery now !

02-20-2010, 18:03	#1 (permalink)
turca No Life Poster Join Date: Dec 2005 Location: mt brazil Posts: 3,379 Member: 211017 Status: Offline Thanks Meter: 312	Cell is dead after user code My cell is dead after format I flash my cell but is dead format is dead help, I have backup my firmware but dead: COM3 [VCP1] selected module v3.09 Device: Autodetect 6228-6239 NAND Checking data, wait... Action: reset settings ("format ffs") NAND interface: BROM_DLL_v3.936.00 Connect... Phone should be Switched OFF ! Press and HOLD Power button now ! Connecting... Booting... Release Power button now ! bootcode current/expected: 3.2/3.2 CPU: 6235:8A04:8A01 status: FF bbchip bl ver: FE NOR flash chip: not installed NAND flash id[0017]: 00AD:007600AD0076 [HYNIX] HY27XS08121M chip size: 64Mb page/spare size: 0200/0010 pages/block: 0020 bits i/o: 08 address cycles: 04 internal RAM size: 00010000 external RAM: absent done Set baudrate (921600)... done ram test... testing... ram test passed ===> detect existing firmware structure... detect ffs... ffs offset/size: 03000000/01000000 firmware size: 48Mb ffs size: 16Mb detect sec ro... detect custom parameters... detect project-id... project-id: E706_XZY1IPHONE.01.0 detect NAND info... number of areas to read: 1 reading (HW_STORAGE_NAND NUTL_READ_PAGE_ONLY)... nfi area detection... external bootloader is not present bootloader version: E706_BOOTLOADER_V005_MT6235B_01_1.bin warning: id-page1 area is invalid nfi area detection finished: failed TCL-ID detection... TCL-ID detection done startup code area #1 detection... startup code area #1 detection done rom info ver: 05 sw version: E706_XZY1IPHONE_PCB01_GPRS_MT6235B_S01.01_0.BIN project-id: E706_XZY1IPHONE.01.0, 00000000 code offset: 00000000 ffs offset/size [01]: 03000000/01000000 rom info structure: 2nd [standard] generation TCL-ID is absent ===> done Format (HW_STORAGE_NAND)... Disconnect... done Finished, time used: 1 min 23 sec Remove/Install battery now !