| Carefull as in some cables is the green the GND and the black the BSI (SFBUS IV as sample)
Remember the GND is where in the battery is (-) and the BSI where on the battery there is the (o)
If the mobile switches on instead of going in local mode it means the mobile needs an higher BSI value
If the mobile goes in local mode but you can't see it check the Jig you are using.
On the UFC V2 as sample is the Jig n. 2 to use with the pin closest to the borde of pinouts not used (free) this jig is symetric so you can try positioning it in both the directions
BR
Alex |