06-07-2010, 23:26
|
#16 (permalink)
|
No Life Poster
Join Date: Nov 2005 Location: ABouSHaDy Age: 48
Posts: 1,873
Member: 200717
Status: Offline
Sonork: 100.1580056 Thanks Meter: 793 | T40 T40p T41 T41p T42 T42p you treat it as 24RF08 Locating the T4xx connection points Switch the T4xx OFF. You should have downloaded the hardware Maintenance Manual already, if you have not done so, Click on the hyperlink below to download the PDF file containing the T43 Hardware Maintenance Manual, you will need to install Adobe Acrobat Reader to view the manual, Adobe Acrobat is FREE and can be obtained here -> Adobe Downloads once you have downloaded the files, close the browser window to return to this page. The 24RF08 eeprom is located right under the network card, which is under the mouse touch pad, very simple to open, and very simple to locate the eeprom as well. Keep individual modules and their screws separate to make it easier to re assemble it correctly NOTE: you may have another eeprom installed at location U3, that other eeprom may be a 93C46, just ignore it. NOTE: VCC is NOT connected, the ThinkPad supplies power to the eeprom later on we will switch on the TP to analyse the eeprom. Assembling your TP You need to re-assemble or partially re-assemble your TP [depending on your chosen connection method] as you will have to have it switched ON and running to read the eeprom. Follow the Hardware Maintenance Manual [FRU System Board], very carefully, double check screw type and size for each individual module. Assemble the TP in the reverse order used to dismantle it. ABOUSHADY |
| |