[Liheng]

Hi all friends and mxkey teams

1202-Failed to read SP data

Phone dropped in water, already cleaned

I flash the latest version and update sp lock, Stile the same

then

Erase Flash

write full flash

write PM from good phone

init simlock, update sp lock

problem still the same

Supported Ids: 2293
ASIC ID: 0x2293 [UPPCosto ver: 2.0]
SecondaryBoot: u3_2nd.fia [DCT4] version: 4.76.0 revision: 0.7 size: 0x9A8
Supported Ids: 3040, 2292, 2293, 3162, 3166, 3168
FlashID0: 0020 8828 [ST 58WR032FU,32 Mbits] page size: 64 K type: NOR area: 01000000-013FFFFF
FlashID1: 0000 0001 [unused/removed]
ExtBUSC: AD7E B61A 2310 0340 C605 E401 20A2 6514
Algorithm: u3_st_i.fia [DCT4 ALGORITHM] version: 4.76.0 revision: 0.7 size: 0x4C30
Supported Ids: 3040, 2292, 2293, 3162, 3166, 3168
Performing Flash Authentication ...OK
UEM ID: 00F01839:2984DA60
Area [01380000-013AFFFF] erased in 3.750 s
Flash programming ...
Programming completed in 1.156 s
Extracting Content Pack, File Server fake reply for CUI phone.
Content Pack extracted successfully in 0.032 s
File Processed in 23.875 s
Processing file: rh112_004.03en as PPM
[DCT4,DCT4 ALGORITHM] size: 1.22 MB
Supported Ids: 2293
ASIC ID: 0x2293 [UPPCosto ver: 2.0]
SecondaryBoot: u3_2nd.fia [DCT4] version: 4.76.0 revision: 0.7 size: 0x9A8
Supported Ids: 3040, 2292, 2293, 3162, 3166, 3168
FlashID0: 0020 8828 [ST 58WR032FU,32 Mbits] page size: 64 K type: NOR area: 01000000-013FFFFF
FlashID1: 0000 0001 [unused/removed]
ExtBUSC: AD7E B61A 2310 0340 C605 E401 20A2 6514
Algorithm: u3_st_i.fia [DCT4 ALGORITHM] version: 4.76.0 revision: 0.7 size: 0x4C30
Supported Ids: 3040, 2292, 2293, 3162, 3166, 3168
Performing Flash Authentication ...OK
UEM ID: 00F01839:2984DA60
Area [01240000-0124FFFF] erased in 1.281 s
Area [01250000-0137FFFF] erased in 23.594 s
Flash programming ...
Programming completed in 9.813 s
File Processed in 45.578 s
Flashing completed in 2 min 57.969 s

Phone Type: RH-112
SW Version: V 04.03 29-06-09 RH-112 (c) Nokia
Imei plain: ??????????????-?
Product Code: 0562271
Cellular System: GSM
ASIC ID: 0x2293, type: 11
Ppm Id: EN
Language Pack:
- not available.


Imei plain is invalid !!!
Imei net: 00000000000000
Version: SIMLOCK SERVER
Counter: 0/3, 0/10

CONFIG_DATA: 0000000000000000
PROFILE_BITS: 0000000000030000

SIMLOCK_DATA corrupted!
Total time to process is 3 min 3.797 s




and i test to rebuild Imei , it show like this

ASIC ID: 0x2293 [UPPCosto ver: 2.0]
SecondaryBoot: u3_2nd.fia [DCT4] version: 4.76.0 revision: 0.7 size: 0x9A8
Supported Ids: 3040, 2292, 2293, 3162, 3166, 3168
FlashID0: 0020 8828 [ST 58WR032FU,32 Mbits] page size: 64 K type: NOR area: 01000000-013FFFFF
FlashID1: 0000 0001 [unused/removed]
ExtBUSC: AD7E B61A 2310 0340 C605 E401 20A2 6514
Algorithm: u3_st_i.fia [DCT4 ALGORITHM] version: 4.76.0 revision: 0.7 size: 0x4C30
Supported Ids: 3040, 2292, 2293, 3162, 3166, 3168
Performing Flash Authentication ...OK
UEM ID: 00F01839A3BDA66
ASIC type: 11
UEM Imei: 35832203283271
SERVER->Served by MXKEY - BLADE X at host1, agent version 1.1 revision 0.1

RPL saved to "C:\mobileEx\3.4\data\backup\RPL\35832203283271.RP L"
ASIC ID: 0x2293 [UPPCosto ver: 2.0]
SecondaryBoot: u3_2nd.fia [DCT4] version: 4.76.0 revision: 0.7 size: 0x9A8
Supported Ids: 3040, 2292, 2293, 3162, 3166, 3168
FlashID0: 0020 8828 [ST 58WR032FU,32 Mbits] page size: 64 K type: NOR area: 01000000-013FFFFF
FlashID1: 0000 0001 [unused/removed]
ExtBUSC: AD7E B61A 2310 0340 C605 E401 20A2 6514
Algorithm: u3_st_i.fia [DCT4 ALGORITHM] version: 4.76.0 revision: 0.7 size: 0x4C30
Supported Ids: 3040, 2292, 2293, 3162, 3166, 3168
Performing Flash Authentication ...OK
UEM ID: 00F01839A3BDA66
Programming FLASH Imei ...failed
warning: For UEM write, VBAT needs to be atleast: 5.2V
Programming UEM Imei (OTP) ...
UEM programmed successfully.

Phone Type: RH-112
SW Version: V 04.03 29-06-09 RH-112 (c) Nokia
Imei plain: 35832203283271-5
Product Code: 0562271
Cellular System: GSM
ASIC ID: 0x2293, type: 11
Ppm Id: EN
Language Pack:
- not available.


Failed to read SP data





what's wrong with this phone

warning: For UEM write, VBAT needs to be atleast: 5.2V

How to use battery 5.2v

is it the UEM demage?

is it Imei problem?


is it SP Lock problem, how to solve it?

is it because of the Mxkey not activate?


Kindly give some idea with this error, I met many phones

thanks in advance