View Single Post
Old 03-30-2000, 23:39   #4 (permalink)
chrisogrady
Junior Member
 
Join Date: Mar 2000
Location: IRELAND
Posts: 3
Member: 1088
Status: Offline
Thanks Meter: 0
Thumbs down

hi again, the above cables are not for the 3210, to make the 3210 cable can you just cut the end of a 9 pin com cable and hook some of the wires to the contacts in the phone, if so there are six contacts, which wires do i connect to the phone .

below are the 9 pins of the cable which plugs into the computer. Each pin has a wire connected to it, each wire is a different color. which of these pins connect to the phone.

\. . . . ./
\\. . . ./



Below are the 6 contacts on the phone. which wires do i need to connect to them to use Nokall and all those other sp progs

top
( 0 )
( 0 )
( 0 )
( 0 )
( 0 )
( 0 )
bottom

if anyone can understand this, you must be pretty clever,cause i`ve lost myself.
looking forward to your help
Thanks a million



[This message has been edited by chrisogrady (edited 31 March 2000).]
  Reply With Quote
 
Page generated in 0.07110 seconds with 7 queries