View Single Post
Old 02-03-2011, 13:35   #1 (permalink)
godwin
No Life Poster
 
Join Date: Jun 2005
Age: 36
Posts: 1,894
Member: 153893
Status: Offline
Thanks Meter: 254
After unlocked vodafone 340 now is DEAD

pls infinity team i need help to solve my dead phone after unlocked.
i unlocked it using smart fast method and i got this error

COM1 [VCP0] selected
module v3.72
Action: "sp-unlock"
unlock method: smart fast
Model: Vodafone-340
Checking data, wait...
Phone should be Switched OFF !
Press and HOLD Power button now !
19200 autodetect
Initializing [6225:8A05:8A00]...
CPU: MT6225
chip: 0001:2F03:A003
status: 01
Connecting at 19200, wait...
Release Power button now !
Phone detected, wait...
Hardware: MT6225,E05
Date: 2006.06.14
Version: 1.0
Version: BM35A1.V2.15.M00.02.39
Version: FOXLINK25_08B_HW
81 byte(s) read
imei: 35592203210311
connection Ok
186 byte(s) read
reading data...
reading data #2...
building new data...
writing data...
174 byte(s) read
reading data...
972 byte(s) read
building new data...
writing data...
verifying...
reading data #2...
error: verification failed
what to do:
1. be sure that you have full flash backup for emergency case
2. make "format ffs" in "complete" mode
3. power-on phone
4. power-off phone by "Power" button (DO NOT remove battery)
5. repeat current operation
error: operation failed !
Finished, time used: 17 sec
Remove/Install battery now !

And i used standard fast method after sucessfully done now the phone is dead.I flash the backup,firmware at the support site and i read flash from different phone to flash it but still DEAD.
i think i was using low version and i download the latest one and i flash it with all the files again but still DEAD.

here is the flash logs with the latest version

COM12 [VCP0] selected
module v3.73
Device: Vodafone-340
Checking data, wait...
advanced flash detection enabled
Action: write flash
"smart write" active
write: Firmware
Vodafone-340_FOXLINK25_08B_PCB01_GPRS_MT6225_S00.BM35A1_V2_ 22_M00_02_42_2010-01-11_En.B0M.bin
skip: Customization/Language Pack
skip: Customization
skip: Eeprom/ffs
====> Boot ...
Press and HOLD Power button now !
19200 fixed
Connecting, wait...
Initializing [6225:8A05:8A00]...
CPU: MT6225
chip: 0001:2F03:A003
status: 01
boot packet size: 0400
Release Power button now !
Boot Done
====> Initialize ...
detecting chip #00 in region #00...
flash: EC257E25082501:2AEA0000000000
flash: Samsung AMD/Fujitsu std [D 0008x002000 00FEx010000 0008x002000] 16Mb
otp offset: 00000000
number of flash chip/regions detected: 01/01
Initialize Done
====> Set baud ...
921600
Set baud Done
====> Initialize bootcode ...
Initialize bootcode Done
====> Check firmware integrity ...
usb bootloader detect...
..
usb bootloader detect (phase #2)...
..
usb bootloader (chip) is absent
searching rom info...
search rom info finished
rom info structure: [protected] type (05), 1 record(s)
TCL-ID is absent
startup code area #1 record #1 is damaged, recalculation required
rom info detection finished
device-id: 1E1020AF
rom info ver: 05
sw version: FOXLINK25_08B_PCB01_GPRS_MT6225_S00.BM35A1_V2_22_M 00_02_42.BINIuthQ
project-id: $6cZ%.i?OKH<`TzAp-V,KKL, 9813EDE8
code offset: 00000000
ffs offset/size [B7]: 0E27AC09/F7982630
rom info structure: [protected] type (05), 1 record(s)
TCL-ID is absent
ffs/eeprom address assigned: 0E27AC09
sec info (detailed) detection...
searching sec info#1...
search sec info#1 finished
sim-lock status: enabled
product id: BM35V2MP_MA7V28JR9BT71SDRPK7GS
area1 is invalid
area2 is valid
area3 is valid
area4 is valid
searching sec info#2...
.
search sec info#2 finished
Check firmware integrity Done
====> Check firmware content ...
Check firmware content Done
====> Backup required data ...
Backup required data Done
====> Patch required data ...
Patch required data Done
====> Special operation ...
Special operation Done
====> Write ...
usb bootloader (file) is absent
startup code area #1 check...
done
file saved: C:\Program Files\InfinityBox\MModule\backup_security\Vodafone-340_FOXLINK25_08B_PCB01_GPRS_MT6225_S00.BM35A1_V2_ 22_M00_02_42.BINIuthQ__system_log_1E1020AF_E8ED139 8_20110203-114730.B0X.bin
Area: Firmware
flash: EC257E25082501:2AEA0000000000
Write: Firmware
usb bootloader (file) is absent
sec info (fast) detection...
searching sec info#1...
search sec info#1 finished
searching sec info#2...
.
search sec info#2 finished
security area (sec info, cust) calculation...
identification header detected
customization detected: BM35A1X1
customization: BM35A1X1
flash: EC257E25082501:2AEA0000000000
flash: EC257E25082501:2AEA0000000000
Write: security area (sec info, cust)
security area (sec info, cust) calculation done
security area (sec info, hash) calculation...
version is not found in database: FOXLINK25_08B_PCB01_GPRS_MT6225_S00.BM35A1_V2_22_M 00_02_42.BIN
use default security area (sec info, hash) pattern
error: can't assign default hash address range for ffs 00B80000/00001000
error: security area (sec info, hash) size is too small: 0000
error: can't calculate security area (sec info, hash)
Write Done
====> Finalization ...
Finalization Done
file saved: C:\Program Files\InfinityBox\MModule\backup_security\Vodafone-340_FOXLINK25_08B_PCB01_GPRS_MT6225_S00.BM35A1_V2_ 22_M00_02_42.BINIuthQ__system_log_1E1020AF_E8ED139 8_20110203-114814.B0X.bin
Finished, time used: 1 min 32 sec
Remove/Install battery now !

After flash i FORMART FFS and REPAIR SECURITY EREA
BUT STILL DEAD
  Reply With Quote
 
Page generated in 0.08300 seconds with 7 queries