i did as you advised but look at log i did on/off "Boot baudrate autoselect but same!!
COM6 [VCP0] selected
module v3.30
Device: Autodetect 6253 NOR
Checking data, wait...
advanced flash detection disabled
Action: read/check information
====> Boot ...
Press and HOLD Power button now !
baud autodetection active
19200 autodetect
Connecting, wait...
Initializing [6253:8A02:8A00]...
CPU: MT6253
high speed boot Off
chip: 0000:0000:000F
status: FF
high speed boot Off
boot packet size: 0400
Release Power button now !
in case of initial connection problem: on/off "Boot baudrate autoselect"
Boot Fail
Finished, time used: 19 sec
Remove/Install battery now ! |