GSM-Forum - View Single Post

Sanchez · 08-23-2011, 18:09

[ --- S5570/S5660/S5660M/S5830 IMEI Rebuild Manual --- ]

Attention IMEI Rebuild is illegal allmost in all countries!!! GSMServer Team included this feature only for purpose to restore phones with damaged IMEI. GSMServer does not takes any responsibility for use or misuse of this feature.

Cable type : Microusb UART or Original USB Data Cable

In case you are using microusb uart cable you may skip steps 1-4 of manual and start with step 5.

Power on phone without simcard inside.
On phones keyboard type *#7284# and select "USB".
Goto "Menu" -> "Settings" -> "Applications" -> "Development". Enable "USB Debugging"
Reboot the phone.
Connect phone to the cable, install drivers if required.
Start pegasus software.
Select phones model from the model list or type model name manually. Press "ENTER" button or click "Create New Module Button".
Select phones port from comport dropdown menu.
Click "Connect" button. Phones infromation and unlock codes will be read.
Press "CTRL+I", "IMEI Rebuild" button will be visible now. In IMEI field type IMEI you would like to write into the phone. Click "Rebuild IMEI" button.
Click "Disconnect" button.
On phones keyboard type *#7284# and select "PDA". Goto "Menu" -> "Settings" -> "Applications" -> "Development". Disable "USB Debugging"

08-23-2011, 18:09	#4 (permalink)
Sanchez No Life Poster Join Date: Aug 2000 Posts: 1,231 Member: 1896 Status: Offline Thanks Meter: 101	[ --- S5570/S5660/S5660M/S5830 IMEI Rebuild Manual --- ] Attention IMEI Rebuild is illegal allmost in all countries!!! GSMServer Team included this feature only for purpose to restore phones with damaged IMEI. GSMServer does not takes any responsibility for use or misuse of this feature. Cable type : Microusb UART or Original USB Data Cable In case you are using microusb uart cable you may skip steps 1-4 of manual and start with step 5. Power on phone without simcard inside. On phones keyboard type #7284# and select "USB". Goto "Menu" -> "Settings" -> "Applications" -> "Development". Enable "USB Debugging" Reboot the phone. Connect phone to the cable, install drivers if required. Start pegasus software. Select phones model from the model list or type model name manually. Press "ENTER" button or click "Create New Module Button". Select phones port from comport dropdown menu. Click "Connect" button. Phones infromation and unlock codes will be read. Press "CTRL+I", "IMEI Rebuild" button will be visible now. In IMEI field type IMEI you would like to write into the phone. Click "Rebuild IMEI" button. Click "Disconnect" button. On phones keyboard type #7284# and select "PDA". Goto "Menu" -> "Settings" -> "Applications" -> "Development". Disable "USB Debugging"