View Single Post
Old 08-29-2011, 09:56   #3 (permalink)
No Life Poster
rogerboogie's Avatar
Join Date: Jan 2005
Location: the earth
Age: 40
Posts: 1,035
Member: 103024
Status: Offline
Thanks Meter: 614
Originally Posted by mrkhanz View Post
  1. Install python 2.6.x (32 bit version):
  2. Install pywin32 for python 2.6:
  3. Install pyserial:
  4. Download the unlocker ( and unpack it (e.g. into the directory C:\pre)
  5. Calculate the USB passthrough key: go to device info, write down the "Serial Number" (P7...), and use to generate the key from this number.
  6. Put your Palm Pre into USB Passthrough mode: enter "#*USBPASS# (#*8727277#) and press the dial icon. A window will appear which asks you to enter the passthrough key. After you've done that, select "Diag" for the "USB PORT 1".
  7. Connect your phone to your machine and install these drivers.
  8. Run and write down your network unlock code.
  9. Disable the passthrough mode: enter "#*USBPASS# (#*8727277#) and press the dial icon again. Set "None" for "USB PORT 1".
  10. Shutdown the phone. Put in a SIM card that is not accepted by the phone and boot it up again.
  11. Carefully enter the network unlock code obtained in step 8. If it gets rejected, please contact me with the perso.txt file that has been saved to the directory of the script. Reboot and enjoy your unlocked phone.


  • Palm Pixi
  • Palm Pixi Plus
  • Palm Pre
  • Palm Pre Plus
  • Palm Pre 2


Another link For Rapidshare
MEGAUPLOAD - The leading online storage and file delivery service
i tryed but no sucess , when i execute palm_unlock script only cmd windows open and close 1 second later, all is intsalled well , and i tryed on 2 clean pc, any idea ?
  Reply With Quote
Page generated in 0.07013 seconds with 7 queries