| Freak Poster
Join Date: Dec 2007
Posts: 268
Member: 642071
Status: Offline Thanks Meter: 54 | Nokia c3-00 v8.63 flash done
Code: RPL Creation started...
Processing CMT Part...
Phone not detected at USB -> Timeout, no any compatible USB device detected.
Warning: Phone not detected, using Rap Public ID in FileName and reading Certificates Only
Booting CMT...
[Nokia USB Flashing Generic]: Port opened OK!
New ROM Detected
CMT_SYSTEM_ASIC_ID: 000000000000000022000509200C0000
CMT_EM_ASIC_ID: 00005361
CMT_PUBLIC_ID: 000000000046CC1DB36C89FD29EF61CA3C5EE13C
CMT_ASIC_MODE_ID: 00
CMT_ROOT_KEY_HASH: 1B0D74C532CA1C6133940C740E8C786E
CMT_BOOT_ROM_CRC: DE56D582
CMT_SECURE_ROM_CRC: BDDE7A3A
CMT Ready!
Searching for BootCode: DualLine 32Bit
BCM21351_usb2nd.fg, Type: 2nd Boot Loader, Rev: 513.11.24.0, Algo: BB5
Using NEW BB5 FLASHING PROTOCOL
Transmission Mode Requested: Control USB, Accepted: Control USB
FlashChip[0,CMT]: 0x0000000000000000, Unknown, RAM
FlashChip[0,CMT]: 0xFFFF000000000000, Unknown, MMC
FlashChip[0,CMT]: 0x0000000000000000, Unknown, NOR
FlashChip[1,CMT]: 0x0000000100000000, Unknown, NOR
FlashChip[0,CMT]: 0x00EC003000000431, Samsung, ONENAND
Requested Algorithm: XSR 1.6 (CMT)
Searching for BootCode: DualLine 32Bit
FlashChip 0x00EC0030 (Samsung), Size: 128MBytes, VPP: Not Supported
BCM21351_XSR16_usbalg.fg, Type: Algorithm, Rev: 513.11.24.0, Algo: XSR 1.6
Initializing TurboCache...
TurboCache Loaded!
Writing CMT PASUBTOC Certificate...
Writing CMT ALG Certificate...
CMT Algorithm Ready!
Transmission Mode Requested: Bulk USB, Accepted: Bulk USB
Box TX2 Data Pin set to: Service Pin 3
Waiting for FUR Client become avaiable...
[Nokia USB Flashing Generic]: Port opened OK!
FUR Avaiable!
Adding FUR Client (CMT, State: Ready)...
CMT FUR Ready!
Overriding VPP Setting, USB can't use VPP
Box VPP disabled
Internal CMT Phone VPP Enabled
PAPUBKEYS Hash for CMT: 697F747788AD72E77DB3BC8DFEC0C28DA22F16D8
APE Subsystem Not Found
Storing NPC...
Storing CCC...
Storing HWC...
CMT VARIANT Not Found
CMT PARTNERC Not Found
Restarting MCU...
RPL Saved OK
RPL backup thread finished, continuing...
Backing up simlock...
Phone not detected at USB -> Timeout, no any compatible USB device detected.
Simlock backup problem -> Phone not detected
Backup simlock thread finished, continuing...
Pre flash tasks finished, continuing...
Processing rm614__08.63.mcusw (CMT)...
Booting CMT...
[Nokia USB Flashing Generic]: Port opened OK!
New ROM Detected
CMT_SYSTEM_ASIC_ID: 000000000000000022000509200C0000
CMT_EM_ASIC_ID: 00005361
CMT_PUBLIC_ID: 000000000046CC1DB36C89FD29EF61CA3C5EE13C
CMT_ASIC_MODE_ID: 00
CMT_ROOT_KEY_HASH: 1B0D74C532CA1C6133940C740E8C786E
CMT_BOOT_ROM_CRC: DE56D582
CMT_SECURE_ROM_CRC: BDDE7A3A
CMT Ready!
rm614__08.63.mcusw, Type: Flash Image, Algo: BB5, XSR 1.6
Searching for BootCode: DualLine 32Bit
BCM21351_usb2nd.fg, Type: 2nd Boot Loader, Rev: 513.11.24.0, Algo: BB5
Using NEW BB5 FLASHING PROTOCOL
Transmission Mode Requested: Control USB, Accepted: Control USB
FlashChip[0,CMT]: 0x0000000000000000, Unknown, RAM
FlashChip[0,CMT]: 0xFFFF000000000000, Unknown, MMC
FlashChip[0,CMT]: 0x0000000000000000, Unknown, NOR
FlashChip[1,CMT]: 0x0000000100000000, Unknown, NOR
FlashChip[0,CMT]: 0x00EC003000000431, Samsung, ONENAND
Requested Algorithm: XSR 1.6 (CMT)
Searching for BootCode: DualLine 32Bit
FlashChip 0x00EC0030 (Samsung), Size: 128MBytes, VPP: Not Supported
BCM21351_XSR16_usbalg.fg, Type: Algorithm, Rev: 513.11.24.0, Algo: XSR 1.6
Initializing TurboCache...
TurboCache Loaded!
Writing CMT PASUBTOC Certificate...
Writing CMT ALG Certificate...
CMT Algorithm Ready!
Transmission Mode Requested: Bulk USB, Accepted: Bulk USB
Box TX2 Data Pin set to: Service Pin 3
Waiting for FUR Client become avaiable...
[Nokia USB Flashing Generic]: Port opened OK!
FUR Avaiable!
Adding FUR Client (CMT, State: Ready)...
CMT FUR Ready!
Overriding VPP Setting, USB can't use VPP
Box VPP disabled
Internal CMT Phone VPP Enabled
PAPUBKEYS Hash for CMT: 697F747788AD72E77DB3BC8DFEC0C28DA22F16D8
Sending Certificates...
Certificates OK
Partitioning...
Partitioning OK
Started group flash erase
EraseArea[0,CMT]: 0x00000000-0x0001FFFF, ONENAND
EraseArea[0,CMT]: 0x00020000-0x000203FF, ONENAND
EraseArea[0,CMT]: 0x00060000-0x012FFFFF, ONENAND
EraseArea[0,CMT]: 0x01300000-0x01DFFFFF, ONENAND
EraseArea[0,CMT]: 0x02600000-0x029FFFFF, ONENAND
Erase Partition (CMT)
Erase Partition (CMT)
Waiting 320s for erasure finish...
Erase taken 0.481s
Writing all blocks...
Initializing TurboCache...
TurboCache Loaded!
Writing CMT KEYS Certificate...
Writing CMT ADA Certificate...
Writing CMT PRIMAPP Certificate...
Writing CMT RAP3NAND Certificate...
Writing CMT PASUBTOC Certificate...
Writing CMT PAPUBKEYS Certificate...
Writing CMT UPDAPP Certificate...
Writing CMT MCUSW Certificate...
Writing CMT MCUSW1 Certificate...
Writing CMT GENIO_INIT Certificate...
Writing CMT ISA+DYNSW Certificate...
Programming Status OK!
All blocks written OK! Time taken 25.777s
Flashing Speed: 9079.03 kBit/S
Processing rm614__08.63.mcusw (APE)...
Processing rm614__08.63.ppm_n (CMT)...
rm614__08.63.ppm_n, Type: Flash Image, Algo: BB5, XSR 1.6
PAPUBKEYS Hash for CMT: 697F747788AD72E77DB3BC8DFEC0C28DA22F16D8
Partitioning...
Partitioning OK
Started group flash erase
EraseArea[0,CMT]: 0x01E00000-0x025FFFFF, ONENAND
Waiting 320s for erasure finish...
Erase taken 0.131s
Writing all blocks...
Initializing TurboCache...
TurboCache Loaded!
Programming Status OK!
All blocks written OK! Time taken 6.509s
Flashing Speed: 6701.92 kBit/S
Processing rm614__08.63.ppm_n (APE)...
Processing rm614__08.63.image_n_059H1X3 (CMT)...
rm614__08.63.image_n_059H1X3, Type: Flash Image, Algo: BB5, XSR 1.6
PAPUBKEYS Hash for CMT: 697F747788AD72E77DB3BC8DFEC0C28DA22F16D8
Partitioning...
Partitioning OK
Started group flash erase
EraseArea[0,CMT]: 0x02A00000-0x0753FFFF, ONENAND
Erase Partition (CMT)
Waiting 320s for erasure finish...
Erase taken 1.132s
Writing all blocks...
Initializing TurboCache...
TurboCache Loaded!
Programming Status OK!
All blocks written OK! Time taken 20.209s
Flashing Speed: 4715.64 kBit/S
Processing rm614__08.63.image_n_059H1X3 (APE)...
Restarting MCU...
All images processed OK! Processing post flash tasks...
Post flash tasks finished!
Flashing successfully finished! All 7pc done
Last edited by ptt; 12-16-2011 at 22:59.
Reason: ADD CODE TAG TO THE LOG
|