| No Life Poster
Join Date: Oct 2011 Location: online
Posts: 871
Member: 1680232
Status: Offline Sonork: 100.1611221 Thanks Meter: 231 | 5130b Successfully Flashed & Unlocked
Code: All initialized - Ready to work
MCU Version V 07.01
MCU Date 23-05-08
Product RM-304 (Nokia 5310 XpressMusic)
Manufacturer (c) Nokia
IMEI 354195025165739
Mastercode 475714772
IMEI Spare 3A45910552617503
IMEI SV 3345910552617543F6000000
PPM V 07.01, 23-05-08, RM-303, (c) Nokia , L
CNT Content: l_304_clacar_red_v2, V 07.01, 23-05-08, RM-303, (c) Nokia , ,
PSN DEI364785
Product Code 0570019
Module Code 0203415
Basic Product Code 0544851
PSD 0000000000000000
LPSN 0
RETU 15
TAHVO 22
AHNE 30
HW 1501
RFIC 064c0609
DSP ICPR71_08w10
LCD SEIKO
BT 2222-143
Simlock Server SIMLOCK SERVER
Simlock Key 3700200072402456
Simlock Profile 8000000000000000
Simlock Key Cnt 0
Simlock FBUS Cnt 0
Simlock [1,1] State: CLOSED Type: MCC-MNC Data: 37002F
Simlock [2,1] State: CLOSED Type: MCC-MNC Data: 42502F
Simlock [3,1] State: CLOSED Type: 7FFF6F07FFFFFFFF @ FC00 Data: 338070
Simlock [4,1] State: CLOSED Type: 7FFF6F07FFFFFFFF @ FC00 Data: 330110
Simlock [5,1] State: CLOSED Type: MCC-MNC Data: 20404F
Auto Selecting Flash Files on User Request...
Product Code: 0570019
This is Valid BB5 Product
No variant found with given Product Code, selecting first one
BB5 Unlock Started...
MCU Version V 07.01
MCU Date 23-05-08
Product RM-304 (Nokia 5310 XpressMusic)
Manufacturer (c) Nokia
IMEI 354195025165739
Mastercode 475714772
Simlock Server SIMLOCK SERVER
Simlock Key 3700200072402456
Simlock Profile 8000000000000000
Simlock Key Cnt 0
Simlock FBUS Cnt 0
Simlock [1,1] State: CLOSED Type: MCC-MNC Data: 37002F
Simlock [2,1] State: CLOSED Type: MCC-MNC Data: 42502F
Simlock [3,1] State: CLOSED Type: 7FFF6F07FFFFFFFF @ FC00 Data: 338070
Simlock [4,1] State: CLOSED Type: 7FFF6F07FFFFFFFF @ FC00 Data: 330110
Simlock [5,1] State: CLOSED Type: MCC-MNC Data: 20404F
Reading Security Block...
Security block OK and saved to "RM-304_354195025165739_272012_111232 PM.SecurityBlock.PM"
WARNING: "21C00118E564025455CC6D052F51603774EEBB8D.C000554C" Not Exists, Will read it...
Reading CYC file from phone...
Booting CMT...
CMT_SYSTEM_ASIC_ID: 000000010000022600010006010C192101013000
CMT_EM_ASIC_ID: 00000295
CMT_EM_ASIC_ID: 00000B22
CMT_PUBLIC_ID: 21C00118E564025455CC6D052F51603774EEBB8D
CMT_ASIC_MODE_ID: 00
CMT_ROOT_KEY_HASH: BAF3A9C3DBFA8454937DB77F2B8852B1
CMT_BOOT_ROM_CRC: 273F6D55
CMT_SECURE_ROM_CRC: DFAAF68F
CMT Ready!
RAP3Gv3_2nd.fg, Type: 2nd Boot Loader, Rev: 0.1.30.0, Algo: BB5
Flashbus Write baud set to 1.0Mbits
Flashbus Read baud set to 98Kbits
Using OLD BB5 FLASHING PROTOCOL
Exploiting - running preloader...
Preloader running OK, Running Custom Loader...
Custom loader running OK! Working...
Old Loader Detected
Readed OK, Saving to "21C00118E564025455CC6D052F51603774EEBB8D.C000554C"
Checking for Rootkey Hash support with selected Unlock Method...
Selected Unlock Method: NCK Calculation (new method)
#pw+920806293763017+1#
#pw+445263626237832+2#
#pw+083824261614458+3#
#pw+304710001152714+4#
#pw+199151233352218+5#
#pw+644361617617006+6#
#pw+029516141446205+7#
Sending NCK Codes..
NCK[1] - ACCEPTED
NCK[2] - Too fast between tries (bruteforce protection)
NCK[3] - Too fast between tries (bruteforce protection)
NCK[4] - Too fast between tries (bruteforce protection)
NCK[5] - Too fast between tries (bruteforce protection)
NCK[6] - Too fast between tries (bruteforce protection)
NCK[7] - Too fast between tries (bruteforce protection)
MCU Version V 07.01
MCU Date 23-05-08
Product RM-304 (Nokia 5310 XpressMusic)
Manufacturer (c) Nokia
IMEI 354195025165739
Mastercode 475714772
Simlock Server SIMLOCK SERVER
Simlock Key 3700200072402456
Simlock Profile 8000000000000000
Simlock Key Cnt 0
Simlock FBUS Cnt 0
Simlock [1,1] State: OPENED Type: MCC-MNC Data: 37002F
Simlock [2,1] State: OPENED Type: MCC-MNC Data: 42502F
Simlock [3,1] State: OPENED Type: 7FFF6F07FFFFFFFF @ FC00 Data: 338070
Simlock [4,1] State: OPENED Type: 7FFF6F07FFFFFFFF @ FC00 Data: 330110
Simlock [5,1] State: OPENED Type: MCC-MNC Data: 20404F
Simlock NCK #pw+920806293763017+1#
Unlock finished! Time taken 14.453s
Processing pre flash tasks...
Read RPL operation not possible for Old USB Flashing Method
Backing up simlock...
MCU Version V 07.01
MCU Date 23-05-08
Product RM-304 (Nokia 5310 XpressMusic)
Manufacturer (c) Nokia
IMEI 354195025165739
Mastercode 475714772
Simlock backup OK, saved to RM-304_354195025165739_272012_111624 PM.SLBackup.PM
Backup simlock thread finished, continuing...
Pre flash tasks finished, continuing...
Processing rm303__07.01.mcusw (CMT)...
Booting CMT...
CMT_SYSTEM_ASIC_ID: 000000010000022600010006010C192101013000
CMT_EM_ASIC_ID: 00000295
CMT_EM_ASIC_ID: 00000B22
CMT_PUBLIC_ID: 21C00118E564025455CC6D052F51603774EEBB8D
CMT_ASIC_MODE_ID: 00
CMT_ROOT_KEY_HASH: BAF3A9C3DBFA8454937DB77F2B8852B1
CMT_BOOT_ROM_CRC: 273F6D55
CMT_SECURE_ROM_CRC: DFAAF68F
CMT Ready!
rm303__07.01.mcusw, Type: Flash Image, Algo: BB5, BB5 ALGORITHM
Searching for BootCode: Single Line 8Bit
RAP3Gv3_2nd.fg, Type: 2nd Boot Loader, Rev: 0.1.30.0, Algo: BB5
Flashbus Write baud set to 1.0Mbits
Flashbus Read baud set to 98Kbits
Using OLD BB5 FLASHING PROTOCOL
If software STUCK HERE with box TX LED lit, that means:
1. You have not attached yellow TX2 Adapter (IT IS REQUIRED FOR BB5 PHONES WHEN USING JAF/UFS CABLES!)
2. Your cable is not TX2 Enabled!
3. Transmission error occured, try again
In either cases, you need to reconnect your box from USB.
FlashChip[0,CMT]: 0x00EC220C00008921, Samsung, NOR
FlashContent[0,CMT]: 00000000000000000000000000000000, NOR
FlashChip[0,CMT]: 0xFFFF000000000000, Unknown, MMC
Transmission Mode Requested: Single Line, 8 bit, Accepted: Single Line, 8 bit
Searching for BootCode: Single Line 8Bit
FlashChip 0x00EC220C (Samsung), Size: 64MBytes, VPP: 9V
RAP3Gv3_algo_fps8.fg, Type: Algorithm, Rev: 0, Algo: BB5 ALGORITHM
Flashbus Write baud set to 2.0Mbits
Transmission Mode Requested: Single Line, 8 bit, Accepted: Single Line, 8 bit
Box VPP disabled
Internal CMT Phone VPP Enabled
PAPUBKEYS Hash for CMT: 3E96DE4212587183E5E16BB2C79692A53C19875D
Flashbus Write baud set to 5.0Mbits
Sending Certificates...
Certificates OK
Started group flash erase
EraseArea[0,CMT]: 0x00000000-0x000006BF, NOR
EraseArea[0,CMT]: 0x000006C0-0x0001FFFF, NOR
EraseArea[0,CMT]: 0x00040000-0x000BFFFF, NOR
EraseArea[0,CMT]: 0x000C0000-0x0013FFFF, NOR
EraseArea[0,CMT]: 0x00140000-0x010DFFFF, NOR
EraseArea[0,CMT]: 0x010E0000-0x0121FFFF, NOR
Waiting 320s for erasure finish...
Erase taken 49.469s
Writing all blocks...
Initializing TurboCache...
TurboCache Loaded!
Writing CMT NOLO Certificate...
Writing CMT KEYS Certificate...
Writing CMT PRIMAPP Certificate...
Writing CMT PASUBTOC Certificate...
Writing CMT PAPUBKEYS Certificate...
Writing CMT UPDAPP Certificate...
Writing CMT DSP0 Certificate...
Writing CMT MCUSW Certificate...
Programming Status OK!
All blocks written OK! Time taken 660.813s
Flashing Speed: 216.35 kBit/S
Restarting MCU...
Processing rm303__07.01.mcusw (APE)...
Processing rm303__07.01.ppm_l (CMT)...
Booting CMT...
CMT_SYSTEM_ASIC_ID: 000000010000022600010006010C192101013000
CMT_EM_ASIC_ID: 00000295
CMT_EM_ASIC_ID: 00000B22
CMT_PUBLIC_ID: 21C00118E564025455CC6D052F51603774EEBB8D
CMT_ASIC_MODE_ID: 00
CMT_ROOT_KEY_HASH: BAF3A9C3DBFA8454937DB77F2B8852B1
CMT_BOOT_ROM_CRC: 273F6D55
CMT_SECURE_ROM_CRC: DFAAF68F
CMT Ready!
rm303__07.01.ppm_l, Type: Flash Image, Algo: BB5, BB5 ALGORITHM
Searching for BootCode: Single Line 8Bit
RAP3Gv3_2nd.fg, Type: 2nd Boot Loader, Rev: 0.1.30.0, Algo: BB5
Flashbus Write baud set to 1.0Mbits
Flashbus Read baud set to 98Kbits
Using OLD BB5 FLASHING PROTOCOL
If software STUCK HERE with box TX LED lit, that means:
1. You have not attached yellow TX2 Adapter (IT IS REQUIRED FOR BB5 PHONES WHEN USING JAF/UFS CABLES!)
2. Your cable is not TX2 Enabled!
3. Transmission error occured, try again
In either cases, you need to reconnect your box from USB.
FlashChip[0,CMT]: 0x00EC220C00008921, Samsung, NOR
FlashContent[0,CMT]: 00000000000000000000000000000000, NOR
FlashChip[0,CMT]: 0xFFFF000000000000, Unknown, MMC
Transmission Mode Requested: Single Line, 8 bit, Accepted: Single Line, 8 bit
Searching for BootCode: Single Line 8Bit
FlashChip 0x00EC220C (Samsung), Size: 64MBytes, VPP: 9V
RAP3Gv3_algo_fps8.fg, Type: Algorithm, Rev: 0, Algo: BB5 ALGORITHM
Flashbus Write baud set to 2.0Mbits
Transmission Mode Requested: Single Line, 8 bit, Accepted: Single Line, 8 bit
Box VPP disabled
Internal CMT Phone VPP Enabled
PAPUBKEYS Hash for CMT: 3E96DE4212587183E5E16BB2C79692A53C19875D
Flashbus Write baud set to 5.0Mbits
Started group flash erase
EraseArea[0,CMT]: 0x01220000-0x0189FFFF, NOR
Waiting 320s for erasure finish...
Erase taken 14.844s
Writing all blocks...
Initializing TurboCache...
TurboCache Loaded!
Programming Status OK!
All blocks written OK! Time taken 211.172s
Flashing Speed: 201.50 kBit/S
Restarting MCU...
Processing rm303__07.01.ppm_l (APE)...
Processing rm303__07.01_ISM_004.image_l_red_movecu_5310b (CMT)...
Booting CMT...
CMT_SYSTEM_ASIC_ID: 000000010000022600010006010C192101013000
CMT_EM_ASIC_ID: 00000295
CMT_EM_ASIC_ID: 00000B22
CMT_PUBLIC_ID: 21C00118E564025455CC6D052F51603774EEBB8D
CMT_ASIC_MODE_ID: 00
CMT_ROOT_KEY_HASH: BAF3A9C3DBFA8454937DB77F2B8852B1
CMT_BOOT_ROM_CRC: 273F6D55
CMT_SECURE_ROM_CRC: DFAAF68F
CMT Ready!
rm303__07.01_ISM_004.image_l_red_movecu_5310b, Type: Flash Image, Algo: BB5, BB5 ALGORITHM
Searching for BootCode: Single Line 8Bit
RAP3Gv3_2nd.fg, Type: 2nd Boot Loader, Rev: 0.1.30.0, Algo: BB5
Flashbus Write baud set to 1.0Mbits
Flashbus Read baud set to 98Kbits
Using OLD BB5 FLASHING PROTOCOL
If software STUCK HERE with box TX LED lit, that means:
1. You have not attached yellow TX2 Adapter (IT IS REQUIRED FOR BB5 PHONES WHEN USING JAF/UFS CABLES!)
2. Your cable is not TX2 Enabled!
3. Transmission error occured, try again
In either cases, you need to reconnect your box from USB.
FlashChip[0,CMT]: 0x00EC220C00008921, Samsung, NOR
FlashContent[0,CMT]: 00000000000000000000000000000000, NOR
FlashChip[0,CMT]: 0xFFFF000000000000, Unknown, MMC
Transmission Mode Requested: Single Line, 8 bit, Accepted: Single Line, 8 bit
Searching for BootCode: Single Line 8Bit
FlashChip 0x00EC220C (Samsung), Size: 64MBytes, VPP: 9V
RAP3Gv3_algo_fps8.fg, Type: Algorithm, Rev: 0, Algo: BB5 ALGORITHM
Flashbus Write baud set to 2.0Mbits
Transmission Mode Requested: Single Line, 8 bit, Accepted: Single Line, 8 bit
Box VPP disabled
Internal CMT Phone VPP Enabled
PAPUBKEYS Hash for CMT: 3E96DE4212587183E5E16BB2C79692A53C19875D
Flashbus Write baud set to 5.0Mbits
Started group flash erase
EraseArea[0,CMT]: 0x018A0000-0x01B1FFFF, NOR
EraseArea[0,CMT]: 0x01B20000-0x03FBFFFF, NOR
Waiting 320s for erasure finish...
Erase taken 109.937s
Writing all blocks...
Initializing TurboCache...
TurboCache Loaded!
Programming Status OK!
All blocks written OK! Time taken 341.813s
Flashing Speed: 224.21 kBit/S
Restarting MCU...
Processing rm303__07.01_ISM_004.image_l_red_movecu_5310b (APE)...
All images processed OK! Processing post flash tasks...
Setting Factory Defaults...
Factory defaults OK
Reading info...
MCU Version V 07.01
MCU Date 23-05-08
Product RM-304 (Nokia 5310 XpressMusic)
Manufacturer (c) Nokia
IMEI 354195025165739
Mastercode 475714772
IMEI Spare 3A45910552617503
IMEI SV 3345910552617543F6000000
PPM V 07.01, 23-05-08, RM-303, (c) Nokia , L
CNT Content: l Movistar Ecuador Red V1.0, 08-11-07, RM-304, (c) Nokia ,
PSN DEI364785
Product Code 0570019
Module Code 0203415
Basic Product Code 0544851
PSD 0000000000000000
LPSN 0
RETU 15
TAHVO 22
AHNE 30
HW 1501
RFIC 064c0609
DSP ICPR71_08w10
LCD SEIKO
BT 2222-143
Simlock Server SIMLOCK SERVER
Simlock Key 3700200072402456
Simlock Profile 8000000000000000
Simlock Key Cnt 0
Simlock FBUS Cnt 0
Simlock [1,1] State: OPENED Type: MCC-MNC Data: 37002F
Simlock [2,1] State: OPENED Type: MCC-MNC Data: 42502F
Simlock [3,1] State: OPENED Type: 7FFF6F07FFFFFFFF @ FC00 Data: 338070
Simlock [4,1] State: OPENED Type: 7FFF6F07FFFFFFFF @ FC00 Data: 330110
Simlock [5,1] State: OPENED Type: MCC-MNC Data: 20404F
Simlock NCK #pw+920806293763017+1#
Read info thread finished, continuing...
Post flash tasks finished!
Flashing successfully finished!
Last edited by ptt; 02-07-2012 at 15:01.
Reason: ADD [CODE] [/CODE] TAG TO THE LOG
|