View Single Post
Old 09-06-2004, 17:54   #21 (permalink)
Luciano
Freak Poster
 
Join Date: Aug 2001
Location: RO
Posts: 479
Member: 5992
Status: Offline
Thanks Meter: 1
Quote:
Originally Posted by zulea2002
And from my informations there will not be needed any smartcard for flashing and other regular operations. It will work (maybe) for RPL files calculation (no more need ASK -> RPL from Nokia servers).

Best regards,
Zulea
this is from FPS-11 user guide:

FPS-11 is composed of four main blocks:
USB2.0 HUB provides USB connections for each flashing port
Data processing block generates the actual flashing signals
Terminal power supply generates flashing/operating voltages for ports
Main power supply

Nokia smart card SX-2 is necessary for mobile terminal programming using FPS-11.

Smart card refused phone flashing authorization. Following reasons might cause this problem:
1. Smart card has expired.
2. Smart card has been disconnected, even for a very short time.
3. Connection to the smart card has been lost.
Solution:
1. In this release, there is no way to insert the smart card, once it has been removed after the PIN code has been verified. You have to restart Phoenix components.
2. If smart card cannot be detected after startup, it might be damaged.
3. If smart card is detected after startup and PIN code verification succeeds but veryfication fails again, smart card might have expired.

Luciano
P.S.
I don't like the part with expiration...
  Reply With Quote
 
Page generated in 0.07408 seconds with 7 queries