MCN v3.43 that made write boot err.ok but if it is read
Welcome to use McnBox!
Selected COM5
Current occupied port COM1 COM1
Baud setting ...
Set Baud done
Initialize in progress ...
Checking data ...
Serial No. MCNxxxxxxxxxx
Firmware V1.15
Checksum 03A8-30BE
Software V3.43
Box Connected!
Ready working at COM5
-------------------------------
Start Scanning...
->...#....
Results:
GND:1 ,RXD:4,TXD:5
[G:1 R:4 T:5] Apply to Box
[G:1 R:4 T:5] Apply to Box
Connecting...
Press Power button now !
Phone Connected!
CPU Info Coolsand (880A7002)
Flash Type NOR
Flash ID 002C00CB(00160000)
Flash Model MX25l032
Flash Size 0x400000(4,0M)
Initialize boot...
Boot Error. ID: 1011
after they were mutually exchange bootloader is still the same