GSM-Forum - View Single Post - nokia x7 rm-707 downgraded by mistake

arsl · 04-05-2013, 10:30

Hi everybody
sounds very bad when doing a mistake n getting ready for execution by the client ha?!
I have downgraded a working x7 by mistake from 111.040 to 111.030, n when i noticed it was late, the phone couldn't enter to test or local mode n phone just showed nokia on screen n went off after about 15 seconds. u might know how I felt that moment: "s*h*i*t*"!!
by the way I flashed again with correct version n phone doesn't still power up after nokia but it goes to test n local mode.
here is the log after pressing the "bus check":

MXKEY [USB Smart Card Reader 0], SN: C######
Using device: USB ROM
Connection status: EHCI:HUB:HUB::USB 2.00 (High-speed)
Driver: NMWCD, ver: 7.1.32.75
Module ver: 1.0.0.21313(12-12-2012), Library ver: 1.0.0.14337(12-12-2012)
Make sure USB cable, Battery and charger are removed from device.
Insert USB cable, Battery back to device(make sure to have fully charged battery).
Insert Charger or Press phone's power button(if flashing doesnt start automatically)
Waiting for USB ROM device ...
CMT SYSTEM ASIC ID: 000000030000022600010007600C192102031104 [RAPUYAMA ver: 1.1]
CMT EM0 ID: 00000C35
CMT EM1 ID: 00000C30
CMT PUBLIC ID: 14400119C5D60344E3532AD28CFD0C8535F0EB25
CMT ASIC MODE ID: 00
CMT ROOT KEY HASH: 916F75217F32081248B15C38DFC8E81B
CMT ROM ID: E693EF0DAC22615B
Loading CMT secondary boot code
SecondaryBoot: RAPUv11_2nd.fg [BB5] version: 11.14.0 revision: 3.0 size: 0x3B40
Supported Ids: 4003192102001104, 400C192102001104, 6003192102001104, 600C192102001104, 6003192102011104, 600C192102011104, 6003192102021104, 600C192102021104, 6003192102031104, 600C192102031104
eBB5ProtocolType: NEW
Secondary boot loaded.
Storage0: 0000 0000 - 0000 0000 type: RAM, asic:CMT
Storage1: FFFF 0000 - 0000 0000 type: MMC, asic:CMT
Storage2: 0000 0000 - 0000 0000 [unused/removed] type: FLASH,NOR, asic:CMT
Storage3: 0000 0001 - 0000 0000 [unused/removed] type: FLASH,NOR, asic:CMT
Storage4: 00EC 0060 - 0000 0032 [Samsung LH28F800BG] type: FLASH,MuxOneNAND, asic:CMT
Suggested algorithm: XSR 1.6
Loading CMT update server data
Algorithm: RAPUv11_XSR17_alg.fg [XSR 1.6] version: 11.14.0 revision: 3.0 size: 0xC66D5
Supported Ids: 4003192102001104, 400C192102001104, 6003192102001104, 600C192102001104, 6003192102011104, 600C192102011104, 6003192102021104, 600C192102021104, 6003192102031104, 600C192102031104
Update server code loaded.
Waiting for USB device removal ...
Device connected: nmwcdnsuc\Nokia USB Flashing Generic, PORT_ID: BF541CF
FUR: Adding Asic CMT as client OK.
CMT PAPUBKEYS HASH: A777258432D3E9101D6160DBAC2702FCC602E752
Selected firmware certificate matched.
Original Imei: 356###########
Original Product code: 059J0D7
Bluetooth ID: 48DCFB26B42D
SIMLOCK PA identifier:
[0] PA_SIMLOC30

Reading CMT NPC (0x190 bytes).
Reading CMT VARIANT (0x0 bytes).
Reading CMT CCC (0x1D8 bytes).
Reading CMT HWC (0xD4 bytes).
Reading CMT R&D (0x0 bytes).
Reading CMT MDM_KEYS (0x0 bytes).
Reading CMT PARTNERC (0x0 bytes).

Waiting for USB device removal ...
Waiting for device boot up ...
Device connected: nmwcdnsuc\Nokia USB Flashing Generic, PORT_ID: BF541CF
Waiting for USB device removal ...
Device connected: nmwcdc\Nokia X7-00 USB Phonet, PORT_ID: F6C012B
Open device failed: FFFFFFFF (4) The system cannot open the file
Warning: Phone did not reboot to normal mode.

Phone type: RM-707 (Nokia X7-00)
SW version: V 79_sr1_12w18.5 27-07-12 RM-707 (c) Nokia
ApeCoreSw: 111.040.1511
Imei plain: 356###########
Product code: 059J0D7
Battery voltage: 3959 mV, current: 97 mA
Language Pack:
- not available.

SLPA ver[4]: PA_SL3/PA_SIMLOC30 (15 digit NCK)
warning: avoid SW Downgrade & manual erase to this phone !

SIMLOCK seems to be valid
SUPERDONGLE_KEY seems to be valid
CMLA_KEY seems to be valid
WMDRM_PD seems to be valid
SIMLOCK_TEST passed
SECURITY_TEST passed

Imei net: 356###########
Version: SIMLOCK SERVER
Counter: 0/3, 0/10

CONFIG_DATA: 2440700000000000
PROFILE_BITS: 0000000000000000

BLOCK1: 1=OPEN, 2=OPEN, 3=OPEN, 4=OPEN, 5=OPEN
BLOCK2: 1=OPEN, 2=OPEN, 3=OPEN, 4=OPEN, 5=OPEN
BLOCK3: 1=OPEN, 2=OPEN, 3=OPEN, 4=OPEN, 5=OPEN
BLOCK4: 1=OPEN, 2=OPEN, 3=OPEN, 4=OPEN, 5=OPEN
BLOCK5: 1=OPEN, 2=OPEN, 3=OPEN, 4=OPEN, 5=OPEN
BLOCK6: 1=OPEN, 2=OPEN, 3=OPEN, 4=OPEN, 5=OPEN
BLOCK7: 1=OPEN, 2=OPEN, 3=OPEN, 4=OPEN, 5=OPEN

as u might see the log says that the security blocks n NPC n everything seems to be fine, but the phone is still on nokia logo.
will be very appreciated if the masters could advise me to do something befor the client hang me up n execute!!
n if u didn't have any suggestion, still blessings good wishes n good byes are welcomed!

))

04-05-2013, 10:30	#1 (permalink)
arsl Insane Poster Join Date: Apr 2006 Location: Ankara Posts: 92 Member: 266278 Status: Offline Thanks Meter: 12	nokia x7 rm-707 downgraded by mistake Hi everybody sounds very bad when doing a mistake n getting ready for execution by the client ha?! I have downgraded a working x7 by mistake from 111.040 to 111.030, n when i noticed it was late, the phone couldn't enter to test or local mode n phone just showed nokia on screen n went off after about 15 seconds. u might know how I felt that moment: "shit"!! by the way I flashed again with correct version n phone doesn't still power up after nokia but it goes to test n local mode. here is the log after pressing the "bus check": MXKEY [USB Smart Card Reader 0], SN: C###### Using device: USB ROM Connection status: EHCI:HUB:HUB::USB 2.00 (High-speed) Driver: NMWCD, ver: 7.1.32.75 Module ver: 1.0.0.21313(12-12-2012), Library ver: 1.0.0.14337(12-12-2012) Make sure USB cable, Battery and charger are removed from device. Insert USB cable, Battery back to device(make sure to have fully charged battery). Insert Charger or Press phone's power button(if flashing doesnt start automatically) Waiting for USB ROM device ... CMT SYSTEM ASIC ID: 000000030000022600010007600C192102031104 [RAPUYAMA ver: 1.1] CMT EM0 ID: 00000C35 CMT EM1 ID: 00000C30 CMT PUBLIC ID: 14400119C5D60344E3532AD28CFD0C8535F0EB25 CMT ASIC MODE ID: 00 CMT ROOT KEY HASH: 916F75217F32081248B15C38DFC8E81B CMT ROM ID: E693EF0DAC22615B Loading CMT secondary boot code SecondaryBoot: RAPUv11_2nd.fg [BB5] version: 11.14.0 revision: 3.0 size: 0x3B40 Supported Ids: 4003192102001104, 400C192102001104, 6003192102001104, 600C192102001104, 6003192102011104, 600C192102011104, 6003192102021104, 600C192102021104, 6003192102031104, 600C192102031104 eBB5ProtocolType: NEW Secondary boot loaded. Storage0: 0000 0000 - 0000 0000 type: RAM, asic:CMT Storage1: FFFF 0000 - 0000 0000 type: MMC, asic:CMT Storage2: 0000 0000 - 0000 0000 [unused/removed] type: FLASH,NOR, asic:CMT Storage3: 0000 0001 - 0000 0000 [unused/removed] type: FLASH,NOR, asic:CMT Storage4: 00EC 0060 - 0000 0032 [Samsung LH28F800BG] type: FLASH,MuxOneNAND, asic:CMT Suggested algorithm: XSR 1.6 Loading CMT update server data Algorithm: RAPUv11_XSR17_alg.fg [XSR 1.6] version: 11.14.0 revision: 3.0 size: 0xC66D5 Supported Ids: 4003192102001104, 400C192102001104, 6003192102001104, 600C192102001104, 6003192102011104, 600C192102011104, 6003192102021104, 600C192102021104, 6003192102031104, 600C192102031104 Update server code loaded. Waiting for USB device removal ... Device connected: nmwcdnsuc\Nokia USB Flashing Generic, PORT_ID: BF541CF FUR: Adding Asic CMT as client OK. CMT PAPUBKEYS HASH: A777258432D3E9101D6160DBAC2702FCC602E752 Selected firmware certificate matched. Original Imei: 356########### Original Product code: 059J0D7 Bluetooth ID: 48DCFB26B42D SIMLOCK PA identifier: [0] PA_SIMLOC30 Reading CMT NPC (0x190 bytes). Reading CMT VARIANT (0x0 bytes). Reading CMT CCC (0x1D8 bytes). Reading CMT HWC (0xD4 bytes). Reading CMT R&D (0x0 bytes). Reading CMT MDM_KEYS (0x0 bytes). Reading CMT PARTNERC (0x0 bytes). Waiting for USB device removal ... Waiting for device boot up ... Device connected: nmwcdnsuc\Nokia USB Flashing Generic, PORT_ID: BF541CF Waiting for USB device removal ... Device connected: nmwcdc\Nokia X7-00 USB Phonet, PORT_ID: F6C012B Open device failed: FFFFFFFF (4) The system cannot open the file Warning: Phone did not reboot to normal mode. Phone type: RM-707 (Nokia X7-00) SW version: V 79_sr1_12w18.5 27-07-12 RM-707 (c) Nokia ApeCoreSw: 111.040.1511 Imei plain: 356########### Product code: 059J0D7 Battery voltage: 3959 mV, current: 97 mA Language Pack: - not available. SLPA ver[4]: PA_SL3/PA_SIMLOC30 (15 digit NCK) warning: avoid SW Downgrade & manual erase to this phone ! SIMLOCK seems to be valid SUPERDONGLE_KEY seems to be valid CMLA_KEY seems to be valid WMDRM_PD seems to be valid SIMLOCK_TEST passed SECURITY_TEST passed Imei net: 356########### Version: SIMLOCK SERVER Counter: 0/3, 0/10 CONFIG_DATA: 2440700000000000 PROFILE_BITS: 0000000000000000 BLOCK1: 1=OPEN, 2=OPEN, 3=OPEN, 4=OPEN, 5=OPEN BLOCK2: 1=OPEN, 2=OPEN, 3=OPEN, 4=OPEN, 5=OPEN BLOCK3: 1=OPEN, 2=OPEN, 3=OPEN, 4=OPEN, 5=OPEN BLOCK4: 1=OPEN, 2=OPEN, 3=OPEN, 4=OPEN, 5=OPEN BLOCK5: 1=OPEN, 2=OPEN, 3=OPEN, 4=OPEN, 5=OPEN BLOCK6: 1=OPEN, 2=OPEN, 3=OPEN, 4=OPEN, 5=OPEN BLOCK7: 1=OPEN, 2=OPEN, 3=OPEN, 4=OPEN, 5=OPEN as u might see the log says that the security blocks n NPC n everything seems to be fine, but the phone is still on nokia logo. will be very appreciated if the masters could advise me to do something befor the client hang me up n execute!! n if u didn't have any suggestion, still blessings good wishes n good byes are welcomed! )) Last edited by arsl; 04-05-2013 at 10:36.