[jawad munir]

Originally Posted by leonirvana

hi, i have this problem with CYCLONE RELOADED + UFC4 (DITS)

I tried nokia 1208 with fbus cable and works fine.

But trying to connect with ufc and I can not make it work. Im using DCT4-H adaptor in the right way on PCB.

I tried many ways of connection but not possible.

I use this cable to connect cyclone reaload with ufc4
http://gsmserver.es/nfs/product/8356...odo-en-uno.jpg

I set cable in Cyclone mode or Jaf mode but not work.

also I set ufc in Jaf Mode(switch 6) or none(all switches down - to numbers side) but not work. (also trying 5.1k or 7.5k)

* Sometimes i get to put in LOCAL/TEST mode, but when try to read info, always
Failed to read info -> Phone not detected
Failed to read info -> Phone not detected

Originally Posted by leonirvana

no body has problem with this combo???

Originally Posted by .:zuberber:.

I have too, cable of UFC4 by dits, somtime getting error on bb5 but on dct4 work fine

You need extra power supply for bb5 in order to work, use the provided usb power supply cable for dits

hope it work for you

Originally Posted by leonirvana

can tell me how u set up your UFC ?l i mean.. wich switches are activated... etc..
what cables do u user? all in 1? how u switch it? cyclone / mt / jaf ?

thanks

i have also use ufc pro and i can u properly and no error with cyclone reloaded

but i have change one thing in this cable
im not use on jaf or ufs cable

im using thins cable as mode try with mt mode don't use jaf mode us mt mode or other work properly


after to check must report here

if u problem same then i will try to use and other method

Br

jawad munir