View Single Post
Old 08-13-2013, 15:01   #23 (permalink)
Freak Poster
Join Date: Jul 2004
Age: 39
Posts: 370
Member: 71290
Status: Offline
Sonork: 100.1645657
Thanks Meter: 104
Originally Posted by oblio View Post
For people who don't want to buy the adapter, here is the modification to supply the eMMC from the box:

Remove R3, R6 and re-route the pins 17 and 19 to the internal regulators U7 and U6. This means we will have VCCQ 1.8V on pin 19 and VCC 3.3V on pin 17.
WARNING, remember that you will have ALL THE TIME this two voltage on the connector, so use this 2 pins ONLY and ONLY when dealing with eMMC direct!

Thank you very much for your solution sir, I was very useful
  Reply With Quote
Page generated in 0.06238 seconds with 7 queries