EasyJtag Suite ver.: 1.0.75.0 started.
Operating system ver.: Windows 7 (build 7601, Service Pack 1), 64-bit edition.
For support and updates visit
EasyJtag , just better ? - New powerful JTAG unbrick device.
Initialising: SAMSUNG GT-I8190 Config ver.:1.01
I/O Level set to : 2600 mV
Box S/N: 11110414B988xxxx ,FW Ver.: 01.47
Connecting to Target...
U8500 USB BOOTROM : device 04CC:8500 opened
success: set configuration #1
success: claim_interface #0
Sending XLOADER...
success: bulk read 4 bytes
Done.
JTAG device: U8500
CPU IDCODE : 0x4BA00477 Mfg.: 0x23b, Part: 0xba00, Ver.: 0x4
CPU Manufacturer: QUALCOMM , CPU Name: CORTEX A9
JTAG device: U8500
CPU IDCODE : 0x62286041 Mfg.: 0x020, Part: 0x2286, Ver.: 0x6
CPU Manufacturer: SGS/Thomson , CPU Name: NOVATHOR U8500 JRC
Halting CPU...
Initialize hardware...
Starting target communication...
Detecting emmc memory parameters of bank (0) ...
EMMC Not Initialised!
BUG: emmc unknown controller initialization failure
does anyone know this problem comes from where? please need help
