View Single Post
Old 12-04-2013, 12:06   #14 (permalink)
No Life Poster
Faisal_Computer's Avatar
Join Date: Jun 2005
Location: Kamalia, Pakistan.
Age: 38
Posts: 16,852
Member: 151871
Status: Offline
Thanks Meter: 71,421
How to Repair No product Name


Here is Video of Repairing Samsung Note 2 N7100 No product name. Method is almost same of all phones.

here we go

Samsung Note 2 N7100 No product name Video we create for let you understand how you can do that. Product name mostly Disappear when you do Boot repair with Boot Repair Card & Wrong Flash & Could be hardware fault. if you got phone in Dead condition and you repair it's boot ( for example we have N7100 ) after boot repair from Boot repair card you will see there is no product name. or if some flash it wrong and mobile goes to dead and after boot repair with boot repair card you see there is no product name then you have to have GPGeMMC box to repair it.

Here is picture with NO product Name:

1st of all you have to select model, after selecting model you have to see pinouts, Double click on picture to zoom, Sold Wire according to the picture ( you must sold 100% Correct wires and Sold wire with lot of care ) after sold wires to the phone Sold that 6 wires to the small ISP Small PCB according to the picture, after just connect small pcb to box. Keep in mind you don't need to put any kind of power like Usb, Power Supply, Battery etc... you don't need any kind of power just connect small isp pcb directly to the box without giving power to phone. After every thing is ready Untick BLANK check and Click on Erase lets software erase, After erase complete. Untick All files and select only BOOT1 and select "Samsung_N7100_GPG(The_number_of_mobile_phone ).boot1" after all Click on Write. Make sure you select only BOOT1. you do not Flash any other file. After write complete UnSold mobile Connect LCD etc. and Flash mobile with normal ways... your phone will be back to normal. Keep in mind GPGeMMC can't repair Hardwarely Damaged phones !!

Here is picture after done


The Following 29 Users Say Thank You to Faisal_Computer For This Useful Post:
Show/Hide list of the thanked
Page generated in 0.07259 seconds with 7 queries