Nokia 6600 problems solved here

[gsmindia]

Originally Posted by Friendship

how can be to format user area,
if the phone not in local mode only white screen????????

Do the following steps

1) Full flash erase
2) write mcu+ppm +pm
3) put the phone on, if phone shows contact retailer the ur ok, just do reset factory settings and unlock simlocks and then format user area ur phone should be ok.
4) in case still not work then put sum flux in and around the ram ic shown in the diagram and heat it a little bit .

post results........

best of luck!!!

[psyche08]

im new in 6600..my version is 3.42.1
and i cant open my camcorder
also whaat application i get to make my video and sound recorder unlimited.. pls help me..thanks...

[pazeth™]

Nokia 6600 "Phone start-up failed. Contact the retailer"

[gsmindia]

Originally Posted by psyche08

im new in 6600..my version is 3.42.1
and i cant open my camcorder
also whaat application i get to make my video and sound recorder unlimited.. pls help me..thanks...

HI ,
1) check if camera is working (do this by clicking some snaps)
2) if camera is working but still camcorder not working you will have to reset your phone to factory settings you can do the same by typing the code *#7370# phone will ask for security password type ur 5 digit password (it usually is 12345) and then phone will restart (after a few minutes).


please post results weather this tip helped u or not

best regards.

[gsmindia]

Originally Posted by pazeth

Nokia 6600 "Phone start-up failed. Contact the retailer"

Hi pazeth,,

Try formatting user area (manual or using twister)

if this does not work then Do the following steps (if you are using twister/tornado/ufs):

1) click on resetfull factory defaults

2) init simlocks

3) format user area

YOUR PHONE AS GOOD AS NEW

Best of luck

[pazeth™]

Originally Posted by gsmindia

Hi pazeth,,

Try formatting user area (manual or using twister)

if this does not work then Do the following steps (if you are using twister/tornado/ufs):

1) click on resetfull factory defaults

2) init simlocks

3) format user area

YOUR PHONE AS GOOD AS NEW

Best of luck

all software done...., this problem is not software....any idea?

[pazeth™]

V3.4 BoxID:FF8A
SN: XXXXXXX
ACTIVATED BOX
Initializing Phone...
Flash configuration:
9B040001007E26022610010201007E26...
Boot and Flash loaders operation took 15.656001 seconds
Erasing - erase took 200.954010 seconds
Flashing MCU - flashing took 385.109018 seconds
Flash configuration:
9B040001007E26022610010201007E26...
Erasing - erase took 12.282001 seconds
Flashing PPM - flashing took 17.906001 seconds
Flashing DONE
After flash processing...

Phone data:
V RD_2004_wk23/31-05-04/NHL-10/(c) NMP.
IMEI 351546009796456
No Java upload specified
AfpOK
Write PM values

Sent

Unlock DCT4
Local Mode confirmed
Sending Data ... SUCCESSFULL
Format User Area. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . FAIL
Format User Area. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . FAIL
Format User Area. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . FAIL

[gsmindia]

hi pazeth,
do the following steps :

1) full erase

2) write mcu+ppm+pm

3) do restore full factory defaults

4) init sim locks

5) format user area

should do the trick !!!

[ANoNYMoUS_1]

hi, how about my 6600 unit its say "phone start up failed contact the retailer"

ive done with erase flash then flash the unit but in the ui settings in init simlocks its say " error in imie phone inzalation failed " and did not continue i also format user area but the same problem im using UFS3....

can u advise me what the bset to do.? tnx.....

[pazeth™]

Originally Posted by gsmindia

hi pazeth,
do the following steps :

1) full erase

2) write mcu+ppm+pm

3) do restore full factory defaults

4) init sim locks

5) format user area

should do the trick !!!

yes i do all, I make flash with griffin, ufs3, PBB, not slove at all, it is hardware problem, do not post software solution.

[ANoNYMoUS_1]

hi, how about my 6600 unit its say "phone start up failed contact the retailer"

ive done with erase flash then flash the unit but in the ui settings in init simlocks its say " error in imie phone inzalation failed " and did not continue i also format user area but the same problem im using UFS3....

can u advise me what the bset to do.? tnx.....

[chisti_2k]

Hi

My experience regarding "Start up failed, Contact Retailer" is as follow:

Full erase then flash MCU.PPM,PM and BT. If result is same then Flash only MCU and PPM after full erase. Do not flash BT and PM. I think result will be "OK". It may be BT falt.

[chisti_2k]

I have a query, how to repair bluetooth ?

[sanjeev_in]

hi gsmindia i am having problem in 6600 it is a water damage piece it shows insert sim card how to get rid of this problem thanks

[gsmindia]

Originally Posted by chisti_2k

I have a query, how to repair bluetooth ?

What error is your phone showing ?

regards