A1708 won't clear Firmware code - GSM-Forum

cashcitymayland · 08-18-2018, 02:36

I can connect and read the sp.
I then save the file and clear the firmware.
When I write back it gives me an error when verifying
Maximum retries 158000
Please help as the firmware lock it still there.
I have tried with auto verify off and it comes up done but still the lock is on.
Thanks

I-rig · 08-18-2018, 06:56

Quote:

Originally Posted by cashcitymayland

I can connect and read the sp.
I then save the file and clear the firmware.
When I write back it gives me an error when verifying
Maximum retries 158000
Please help as the firmware lock it still there.
I have tried with auto verify off and it comes up done but still the lock is on.
Thanks

try lower speed....press and hold power and don't forget to plug in the power
test result

cashcitymayland · 08-18-2018, 08:10

it doesn't read/write chip with the power button pressed or power in. It only reads chip when no power button pressed and no power to it, I have tried the lowest speed and it still doesn't work. still stops at 158000
???????

luistobcn · 08-18-2018, 09:04

Quote:

Originally Posted by cashcitymayland

it doesn't read/write chip with the power button pressed or power in. It only reads chip when no power button pressed and no power to it, I have tried the lowest speed and it still doesn't work. still stops at 158000
???????

hi.
press power, wait a few seconds.press again power and hold, during the whole process.

cashcitymayland · 08-19-2018, 01:41

when I press power wait a few seconds it says can't connect, I've tried also with power connected. The only time I can get it to connect is with no power connected and not touching the power button.
The problem is the writing/verifying of the file

I-rig · 08-19-2018, 08:13

Quote:

Originally Posted by cashcitymayland

when I press power wait a few seconds it says can't connect, I've tried also with power connected. The only time I can get it to connect is with no power connected and not touching the power button.
The problem is the writing/verifying of the file

http://forum.gsmhosting.com/vbb/f101...476-a-2416810/

just like my case, I haven't got a suitable dump file, I think this efi bios has a problem

3rv1n · 12-04-2018, 18:19

Quote:

Originally Posted by cashcitymayland

I can connect and read the sp.
I then save the file and clear the firmware.
When I write back it gives me an error when verifying
Maximum retries 158000
Please help as the firmware lock it still there.
I have tried with auto verify off and it comes up done but still the lock is on.
Thanks

Did you fix this sir? i have the same problem

08-18-2018, 02:36	#1 (permalink)
cashcitymayland Freak Poster Join Date: Mar 2010 Posts: 161 Member: 1271167 Status: Offline Thanks Meter: 23	A1708 won't clear Firmware code I can connect and read the sp. I then save the file and clear the firmware. When I write back it gives me an error when verifying Maximum retries 158000 Please help as the firmware lock it still there. I have tried with auto verify off and it comes up done but still the lock is on. Thanks

08-18-2018, 08:10	#3 (permalink)
cashcitymayland Freak Poster Join Date: Mar 2010 Posts: 161 Member: 1271167 Status: Offline Thanks Meter: 23	it doesn't read/write chip with the power button pressed or power in. It only reads chip when no power button pressed and no power to it, I have tried the lowest speed and it still doesn't work. still stops at 158000 ???????

08-19-2018, 01:41	#5 (permalink)
cashcitymayland Freak Poster Join Date: Mar 2010 Posts: 161 Member: 1271167 Status: Offline Thanks Meter: 23	when I press power wait a few seconds it says can't connect, I've tried also with power connected. The only time I can get it to connect is with no power connected and not touching the power button. The problem is the writing/verifying of the file