Iphone 7 and Iphone 7 plus unlock activation - GSM-Forum

HDB · 09-25-2017, 16:36

Starting with Iphone APP 3.0 you can use HDBOX to unlock IPhone 7 / IPhone 7 plus running IOS10.3.x and latest.IOS11.
Nightly built right now is 3.0B and public release will be 3.0C, but for our customers who got their activation code here is how to enter the activation code:

Start IPhone 3.0B on your HDBOX,
Connect an Iphone ( you can use other iphone than IPhone 7 for activation only, the procedure only works on iphone 7)
Press enter one time to start setup process,
Use up / down to switch from 4 Digit pin to 6 Digit Pin, and press enter to select it. If already activated you will go directly to step 7
Use up / down to modify each digit and enter to move onto next digit of the activation code
Finish entering last digit from your activation code, and press enter to confirm it
Code was good, and now you can continue entering the initial 6 pin code and finish the setup process
Code was not good, box will display "!Invalid Code!" for 1 second, then you will back to step 4 where ask you to enter your activation code again.

Do not worry, the activation code is saved inside HDBOX and you only have to do this procedure one time. Next time time you go directly from step 4 to step 7 in above guide.

Best regards,
HDBOX Support team.

09-25-2017, 16:36	#1 (permalink)
HDB No Life Poster Join Date: May 2010 Location: Shenzhen, China Posts: 522 Member: 1300847 Status: Offline Thanks Meter: 547	Iphone 7 and Iphone 7 plus unlock activation Starting with Iphone APP 3.0 you can use HDBOX to unlock IPhone 7 / IPhone 7 plus running IOS10.3.x and latest.IOS11. Nightly built right now is 3.0B and public release will be 3.0C, but for our customers who got their activation code here is how to enter the activation code: Start IPhone 3.0B on your HDBOX, Connect an Iphone ( you can use other iphone than IPhone 7 for activation only, the procedure only works on iphone 7) Press enter one time to start setup process, Use up / down to switch from 4 Digit pin to 6 Digit Pin, and press enter to select it. If already activated you will go directly to step 7 Use up / down to modify each digit and enter to move onto next digit of the activation code Finish entering last digit from your activation code, and press enter to confirm it Code was good, and now you can continue entering the initial 6 pin code and finish the setup process Code was not good, box will display "!Invalid Code!" for 1 second, then you will back to step 4 where ask you to enter your activation code again. Do not worry, the activation code is saved inside HDBOX and you only have to do this procedure one time. Next time time you go directly from step 4 to step 7 in above guide. Best regards, HDBOX Support team.