Faild to boot itel a571l - GSM-Forum

Arslanmayo · 06-13-2023, 05:35

i tel a571l faild to boot phone is logo stuck i want to flash but im getting this error tried with many boots but still faild to boot
Waiting For Device Connection...
USB PORT: SPRD U2S Diag (COM9)
Port: SPRD U2S Diag (COM9)
Manufacturer: DriverCoding Corporation
OPEN COM PORT... OK
Waiting for server........ OK
Load fdl loaders... OK
Handshake FDL... OK
Boot id: SPRD3
Sending FDL... OK
Handshake NAND_FDL... OK
Boot version: Spreadtrum Boot Block version 1.1
Sending NAND_FDL... OK
Send authentication packet... OK
Disable transcode... OK
Reading Partition Table... FAIL
[PROTOCOL ERR] UNSUPPORTED CHIP
Waiting for server........ OK
Format Userdata Partition... FAIL
[PROTOCOL ERR] USERDATA PARTITION NOT FOUND
Elapsed Time: 1 sec, 8 msecs

Waiting For Device Connection...
USB PORT: SPRD U2S Diag (COM9)
Port: SPRD U2S Diag (COM9)
Manufacturer: DriverCoding Corporation
OPEN COM PORT... OK
Waiting for server........ OK
Load fdl loaders... OK
Handshake FDL... OK
Boot id: SPRD3
Sending FDL... OK
Handshake NAND_FDL... OK
Boot version: Spreadtrum Boot Block version 1.1
Sending NAND_FDL... OK
Send authentication packet... OK
Disable transcode... OK
Reading Partition Table... FAIL
[PROTOCOL ERR] UNSUPPORTED CHIP
Waiting for server........ OK
Format Userdata Partition... FAIL
[PROTOCOL ERR] USERDATA PARTITION NOT FOUND
Elapsed Time: 1 sec, 152 msecs

Arslanmayo · 06-13-2023, 05:39

with custom loader im stuck here
Waiting For Device Connection...
USB PORT: SPRD U2S Diag (COM9)
Port: SPRD U2S Diag (COM9)
Manufacturer: DriverCoding Corporation
OPEN COM PORT... OK
Waiting for server........ OK
Load fdl loaders from pac... OK
Handshake FDL... OK
Boot id: SPRD3
Sending FDL... OK
Handshake NAND_FDL... OK
Boot version: Spreadtrum Boot Block version 1.1
Sending NAND_FDL... OK
Send authentication packet... OK
Disable transcode... OK
Erase default partitions
Erase uboot_log... OK
Erase l_runtimenv1... OK
Erase misc... OK
Erase sysdumpdb... OK
Erase metadata... OK
Update partitions table... OK
Write [prodnv] -> [prodnv.img]... FAIL
[PROTOCOL ERR] BSL_REP_OPERATION_FAILED [0x00000084]
Total WRITE Data: 48.07 KB

Arslanmayo · 06-13-2023, 07:27

Waiting For Device Connection...
USB PORT: SPRD U2S Diag (COM2)
Port: SPRD U2S Diag (COM2)
Manufacturer: DriverCoding Corporation
OPEN COM PORT... OK
Waiting for server........ OK
Load fdl loaders from pac... OK
Handshake FDL... OK
Boot id: SPRD3
Sending FDL... OK
Handshake NAND_FDL... OK
Boot version: Spreadtrum Boot Block version 1.1
Sending NAND_FDL... OK
Send authentication packet... OK
Disable transcode... OK
Erase default partitions
Erase uboot_log... OK
Erase l_runtimenv1... OK
Erase misc... OK
Erase sysdumpdb... OK
Erase metadata... OK
Update partitions table... OK
Write [super] -> [super.img]... FAIL
[PROTOCOL ERR] BSL_REP_VERIFY_ERROR [0x0000008B]
Total WRITE Data: 24.75 KB

**easy-team** · 06-13-2023, 09:24

Quote:

Originally Posted by Arslanmayo

Waiting For Device Connection...
USB PORT: SPRD U2S Diag (COM2)
Port: SPRD U2S Diag (COM2)
Manufacturer: DriverCoding Corporation
OPEN COM PORT... OK
Waiting for server........ OK
Load fdl loaders from pac... OK
Handshake FDL... OK
Boot id: SPRD3
Sending FDL... OK
Handshake NAND_FDL... OK
Boot version: Spreadtrum Boot Block version 1.1
Sending NAND_FDL... OK
Send authentication packet... OK
Disable transcode... OK
Erase default partitions
Erase uboot_log... OK
Erase l_runtimenv1... OK
Erase misc... OK
Erase sysdumpdb... OK
Erase metadata... OK
Update partitions table... OK
Write [super] -> [super.img]... FAIL
[PROTOCOL ERR] BSL_REP_VERIFY_ERROR [0x0000008B]
Total WRITE Data: 24.75 KB

Sir, this phone has a hardware glitch, not a software

bijoychowdry · 11-21-2023, 08:28

Waiting For Device Connection...
USB PORT: SPRD U2S Diag (COM3)
Port: SPRD U2S Diag (COM3)
Manufacturer: UNISOC Communications Inc.
OPEN COM PORT... OK
Loading fdl loaders... OK
Handshake FDL... OK
Boot id: SPRD3
Sending FDL... OK
Handshake NAND_FDL... OK
Boot version: Spreadtrum Boot Block version 1.1
Sending NAND_FDL...
Send authentication packet... OK
Disable transcode... OK
Update partitions table... FAIL
[PROTOCOL ERR] BSL_REP_OPERATION_FAILED [0x00000084]

**easy-team** · 11-21-2023, 09:00

Quote:

Originally Posted by bijoychowdry

Waiting For Device Connection...
USB PORT: SPRD U2S Diag (COM3)
Port: SPRD U2S Diag (COM3)
Manufacturer: UNISOC Communications Inc.
OPEN COM PORT... OK
Loading fdl loaders... OK
Handshake FDL... OK
Boot id: SPRD3
Sending FDL... OK
Handshake NAND_FDL... OK
Boot version: Spreadtrum Boot Block version 1.1
Sending NAND_FDL...
Send authentication packet... OK
Disable transcode... OK
Update partitions table... FAIL
[PROTOCOL ERR] BSL_REP_OPERATION_FAILED [0x00000084]

what is model phone sir and send me image full by eft pro

06-13-2023, 05:35	#1 (permalink)
Arslanmayo No Life Poster Join Date: Oct 2015 Location: Pakistan Posts: 1,703 Member: 2478233 Status: Offline Thanks Meter: 574	Faild to boot itel a571l i tel a571l faild to boot phone is logo stuck i want to flash but im getting this error tried with many boots but still faild to boot Waiting For Device Connection... USB PORT: SPRD U2S Diag (COM9) Port: SPRD U2S Diag (COM9) Manufacturer: DriverCoding Corporation OPEN COM PORT... OK Waiting for server........ OK Load fdl loaders... OK Handshake FDL... OK Boot id: SPRD3 Sending FDL... OK Handshake NAND_FDL... OK Boot version: Spreadtrum Boot Block version 1.1 Sending NAND_FDL... OK Send authentication packet... OK Disable transcode... OK Reading Partition Table... FAIL [PROTOCOL ERR] UNSUPPORTED CHIP Waiting for server........ OK Format Userdata Partition... FAIL [PROTOCOL ERR] USERDATA PARTITION NOT FOUND Elapsed Time: 1 sec, 8 msecs Waiting For Device Connection... USB PORT: SPRD U2S Diag (COM9) Port: SPRD U2S Diag (COM9) Manufacturer: DriverCoding Corporation OPEN COM PORT... OK Waiting for server........ OK Load fdl loaders... OK Handshake FDL... OK Boot id: SPRD3 Sending FDL... OK Handshake NAND_FDL... OK Boot version: Spreadtrum Boot Block version 1.1 Sending NAND_FDL... OK Send authentication packet... OK Disable transcode... OK Reading Partition Table... FAIL [PROTOCOL ERR] UNSUPPORTED CHIP Waiting for server........ OK Format Userdata Partition... FAIL [PROTOCOL ERR] USERDATA PARTITION NOT FOUND Elapsed Time: 1 sec, 152 msecs

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

06-13-2023, 05:39	#2 (permalink)
Arslanmayo No Life Poster Join Date: Oct 2015 Location: Pakistan Posts: 1,703 Member: 2478233 Status: Offline Thanks Meter: 574	with custom loader im stuck here Waiting For Device Connection... USB PORT: SPRD U2S Diag (COM9) Port: SPRD U2S Diag (COM9) Manufacturer: DriverCoding Corporation OPEN COM PORT... OK Waiting for server........ OK Load fdl loaders from pac... OK Handshake FDL... OK Boot id: SPRD3 Sending FDL... OK Handshake NAND_FDL... OK Boot version: Spreadtrum Boot Block version 1.1 Sending NAND_FDL... OK Send authentication packet... OK Disable transcode... OK Erase default partitions Erase uboot_log... OK Erase l_runtimenv1... OK Erase misc... OK Erase sysdumpdb... OK Erase metadata... OK Update partitions table... OK Write [prodnv] -> [prodnv.img]... FAIL [PROTOCOL ERR] BSL_REP_OPERATION_FAILED [0x00000084] Total WRITE Data: 48.07 KB

06-13-2023, 07:27	#3 (permalink)
Arslanmayo No Life Poster Join Date: Oct 2015 Location: Pakistan Posts: 1,703 Member: 2478233 Status: Offline Thanks Meter: 574	Waiting For Device Connection... USB PORT: SPRD U2S Diag (COM2) Port: SPRD U2S Diag (COM2) Manufacturer: DriverCoding Corporation OPEN COM PORT... OK Waiting for server........ OK Load fdl loaders from pac... OK Handshake FDL... OK Boot id: SPRD3 Sending FDL... OK Handshake NAND_FDL... OK Boot version: Spreadtrum Boot Block version 1.1 Sending NAND_FDL... OK Send authentication packet... OK Disable transcode... OK Erase default partitions Erase uboot_log... OK Erase l_runtimenv1... OK Erase misc... OK Erase sysdumpdb... OK Erase metadata... OK Update partitions table... OK Write [super] -> [super.img]... FAIL [PROTOCOL ERR] BSL_REP_VERIFY_ERROR [0x0000008B] Total WRITE Data: 24.75 KB

11-21-2023, 08:28	#5 (permalink)
bijoychowdry No Life Poster Join Date: Jul 2013 Location: gsm forum Posts: 585 Member: 1984655 Status: Offline Sonork: 119.30.39.25 Thanks Meter: 77	Waiting For Device Connection... USB PORT: SPRD U2S Diag (COM3) Port: SPRD U2S Diag (COM3) Manufacturer: UNISOC Communications Inc. OPEN COM PORT... OK Loading fdl loaders... OK Handshake FDL... OK Boot id: SPRD3 Sending FDL... OK Handshake NAND_FDL... OK Boot version: Spreadtrum Boot Block version 1.1 Sending NAND_FDL... Send authentication packet... OK Disable transcode... OK Update partitions table... FAIL [PROTOCOL ERR] BSL_REP_OPERATION_FAILED [0x00000084]