samsung s9 MDM remove 100% work
 

1 select boot image and click make kernal to bypass knox you get boot file
2 select EFT file.pro then flash
3 combination file select cm.bin and flash now mdm remove
100% eft dongle make this
Thankyou

what about RMM in download mode? its normal?

sir n950f mdm lock remove possible

always post video help full new users bro

After reset RElock HAHAAHHAAAAAAAAAAAAAAAA

10 times reset this its working without any problem you can reset with recovey and as well what else

Great keep it up .


BR,
Mohammed Aamri

oh ok, and it,ll knox tripe ?

Yes Knox will be triped .


BR,
Mohammed Aamri

hi
knox triped software update but plystore missing how to install plystore
Thankyou

Root then add with EFT

i'm with s10 plus with MDM g975f anyone fix this?

How about the phone with MDM lock and can not get into download mode?
any solution for those ?


NOTE FOR KIDS : don't reply saying press volume down+bixby+power key to enter download, or use 300k tool or bla bla bla.

There is a new knox security in devices which doesn' let the phone go in download mode to flash any file on it.

LITTLE MASTER

i,m also searching for solution, but in mine case, when device have pattern lock too, :D

N950f MDM Done.
 

N950F 9.0 Remove mdm samsung remove knox samsung Done. With EFT Dongle:)

Thanx buddy , always try to provide the procedure ;)

Could to test this files with N9600 (Note9)???


Enviado desde mi iPhone utilizando Tapatalk

RMM Prenormal so cant flash boot.eftpro file

Just leave the phone 7 days without turning off and the prenormal state will change to normal state.

can you update,?? mine was blocked again when i updated

And whats Knox Warranty void ? 0x0 or 0x1 ?

S10 FRP + MDM + User Lock
 

I have an S10 which has all 3 locks on at the same time :(
1. FRP
2. MDM (RAC)
3. User lock

So, starting with the S10 series the MDM security locks out both download and upload modes, including the following AT commands on the USB-Modem port:
AT+FUS?
AT+SUDDLMOD=0,0

After the above commands the phone turns off trying to go into download mode but MDM prevents it. But at least they provide enough delay right after bootup and before the MDM popping up to allow quickly going into Settings > Lock Screen > Screen Lock Type > None (of course must know your lock code)

There are a bunch of other AT commands which seem to work on the USB-Modem port, but none of them are too useful to unlock MDM:
AT+AIRPLANEVALUE?
AT+BATGETLEVEL?
AT+CIMI
AT+DEVCONINFO - Long info
AT+DLMODE - ??
AT+FACTORST=0,0 - Factory reset
AT+FUS? - DL mode
AT+GSN - IMEI
AT+IMEINUM
AT+SERIALNO
AT+SIZECHECK - Storage info
AT+SIZECHECK=1,0 - Storage info
AT+SUDDLMOD=0,0
AT+SVCIFPGM=1,1 - Short Info
AT+SWDLMODE - ??
AT+SWVER=1,0 - DL mode
AT+SWVERSION=1,0
AT+SYSSCOPE=1,0
AT+WPROTECT=1,0

The only mode that works is recovery (unfortunately not much can be done there), and the USB-Modem port which accepts AT commands, including encrypted challenge-respose lock commands which need to be calculated by a server. Here's the log of the FRP unlock via server, after which I was able to activate ADB but not OEM Unlock or download mode:

Open Usb Port - PASS
Detected Testing - PASS
Read phone info....
Model Name : SM-G973F
Customer Code : TTT
S/W version : G973FXXU1ASE7
Unique Number : CE11182BF3538932xxxx
Serial Number : R28M30xxxx
Imei Number : 35463410028xxxx
Check Unlock Status - TRIGGERED
Start Clear Process
Please waiting ...
DBMS Get RandomKey... OK
DBMS Calculation RSAKey... OK
Finished - Successfully
Check Unlock Status - UNLOCK


So, still can't turn on OEM Unlock (grayed out), and can't enter download mode to flash an eng-boot/combination in order to erase the security partitions (persdata, persist, persistent, aboot-sec, etc)
Samsung may have some special resistor values or a special jig which could kick the phone into download mode, but I haven't found anything working along those lines.

For MDM no download mode newer models means something tough in these days but work hard find pinouts you're welcome to J tagger's paradise

New MDM security no dowload, no at comands, no 15 failes attemps of patternlock. Solution is JTAG only 100% tested on EMMC devices, and someday UFS.https://uploads.tapatalk-cdn.com/201...2f1c387039.jpg

Enviado desde mi SM-A505G mediante Tapatalk

SO has ufs chip ,
Pinout available for ufs?

which jtag are you using bro

For the procedure to remove MDM using EFT

1. What is the definition of boot image to make kernel
Please explain what file to use , stock rom ,combination file

2. Is EFT pro generated automatically or you have to create
Or download from somewhere

Please can you explain so I have better understanding thank you

hi
bro eft dongle not make kernal with boot image some how need contact support
Thankyou

Thanks to a member who told me that Boot Image files can only be downloaded from support , its a shame EFT couldnt simply instructions

so nowI have download boot image for G960F S9 U4

I am trying to make a kernel to remove mdm

eft says please scan ports and choose com ports, the port I can see is Samsung but in download mode but not detecting for making kernal

Does phone need to be on in normal mode
or download mode?

Bro try both if not flash the combination files try

Hi.
I try to do same procedure to remove mdm from G900A.
Cant see Cm.bin in combination file.
Maybe its a old type files.
I have only this files, wich is same as Cm.bin?

sdi:rolleyes::rolleyes::rolleyes::rolleyes:

SM-G900A its locked bootloader so its not supported .


BR,
Mohammed Aamri

but i cant find any cm.bin file from U7 sm-G960U combination plz help

ok so i was able to flash the boot file i made with EFT, but then when its time to flash CM.bin i cant find it on the combination becuase i have Qualcomm model, so i tried with cmnlib.mbn and cmnlib64.mbn but no success at all..
do you have idea what to do from here?

Please help i have G960U1 Mdm Lock

Analyzing [C:/Users/UNLOCKFORTAL/Desktop/SM-G9600 FULL REPAIR ZHU6DTA7_4FILES_10_BRAZIL/KnoxRemoverBoot.kEFT].....OK
Searching for Samsung ODIN protocol.....Nothing found
Operation {Flash patched EFT files} ID: 6B68413B796CA0A5
Elapsed time 00:12 -- Version 3.6.1

where you played bro file here the error always

Device must be connected in Download mode

i dont see G960u in the list of supported models