blackview a70 frp [Solved] - GSM-Forum

gsm_eprom · 10-13-2021, 21:27

blackview a70 frp posible to unlock via octoplus frp toll

Spreadtrum Unisoc SC9863A procesor

thanks

Octopus box · 10-14-2021, 09:20

Hello.

Please, select General Reset FRP Methods/SC9863A then perform Reset FRP operation and post here result.

amazir · 11-05-2021, 19:09

Work ID: 0000000001C5472A
Platform: __GENERAL RESET FRP METHODS
Selected model: SC9863A SIGN V1
Please, reconnect battery, press and hold "Vol+" or "Vol-" button and connect USB cable.
Searching for a phone. Please wait...
Found phone on COM220
Connecting...
Mobile Status: SPRD3
Sending preloader...
Operation was failed!
Performed by 2.0.7.0 Software version.
tested now the phone not power and not connect even with vol+ and vol-
how to relive phone please

Octopus support · 11-06-2021, 10:33

Hello.

We will pass the information about your case on to our developers and will contact you on Monday.

Octopus support · 11-08-2021, 09:13

Hello.

Try several phone models from software list one at a time.

Also, after each model you need reboot the device.

Also, try use different combinations of buttons (Vol- Vol+ and Power).

amazir · 11-08-2021, 10:06

hi after disassembling the phone and disconnect battery the phone power on normally but any way to bypass the frp
tested with
SC9863A SIGN V1
SC9863A SIGN V2
SC9863A SIGN V3
finally success with SC9863A SIGN V4

phone version A70_EEA_L615A_V1.0_20210818V12
ANDROID 11
Work ID: 0000000001C7E162
Platform: __GENERAL RESET FRP METHODS
Selected model: SC9863A SIGN V4
Please, reconnect battery, press and hold "Vol+" or "Vol-" button and connect USB cable.
Searching for a phone. Please wait...
Found phone on COM191
Connecting...
Mobile Status: SPRD3
Sending preloader...
Mobile Status: Spreadtrum Boot Block version 1.1
Sending mainloader...
Reading info...
Searching for signatures...
Resetting FRP lock..
FRP lock is successfully reseted!
Performed by 2.0.7.0 Software version.
can you add it in blackview selection for users please ?

10-13-2021, 21:27	#1 (permalink)
gsm_eprom Freak Poster Join Date: Oct 2005 Location: amsterdam Posts: 268 Member: 191258 Status: Offline Thanks Meter: 36	blackview a70 frp [Solved] blackview a70 frp posible to unlock via octoplus frp toll Spreadtrum Unisoc SC9863A procesor thanks

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

10-14-2021, 09:20	#2 (permalink)
Octopus box Product Supporter Join Date: Oct 2009 Location: Romania, Bucharest Posts: 99,808 Member: 1146942 Status: Offline Sonork: 100.1587278 Thanks Meter: 27,407	Hello. Please, select General Reset FRP Methods/SC9863A then perform Reset FRP operation and post here result.

11-05-2021, 19:09	#3 (permalink)
amazir No Life Poster Join Date: Oct 2006 Posts: 745 Member: 362622 Status: Offline Thanks Meter: 43	Work ID: 0000000001C5472A Platform: __GENERAL RESET FRP METHODS Selected model: SC9863A SIGN V1 Please, reconnect battery, press and hold "Vol+" or "Vol-" button and connect USB cable. Searching for a phone. Please wait... Found phone on COM220 Connecting... Mobile Status: SPRD3 Sending preloader... Operation was failed! Performed by 2.0.7.0 Software version. tested now the phone not power and not connect even with vol+ and vol- how to relive phone please

11-06-2021, 10:33	#4 (permalink)
Octopus support Product Supporter Join Date: Jan 2019 Location: USA, New York Posts: 10,143 Member: 2891705 Status: Online Thanks Meter: 2,137	Hello. We will pass the information about your case on to our developers and will contact you on Monday.

11-08-2021, 09:13	#5 (permalink)
Octopus support Product Supporter Join Date: Jan 2019 Location: USA, New York Posts: 10,143 Member: 2891705 Status: Online Thanks Meter: 2,137	Hello. Try several phone models from software list one at a time. Also, after each model you need reboot the device. Also, try use different combinations of buttons (Vol- Vol+ and Power).

11-08-2021, 10:06	#6 (permalink)
amazir No Life Poster Join Date: Oct 2006 Posts: 745 Member: 362622 Status: Offline Thanks Meter: 43	hi after disassembling the phone and disconnect battery the phone power on normally but any way to bypass the frp tested with SC9863A SIGN V1 SC9863A SIGN V2 SC9863A SIGN V3 finally success with SC9863A SIGN V4 phone version A70_EEA_L615A_V1.0_20210818V12 ANDROID 11 Work ID: 0000000001C7E162 Platform: __GENERAL RESET FRP METHODS Selected model: SC9863A SIGN V4 Please, reconnect battery, press and hold "Vol+" or "Vol-" button and connect USB cable. Searching for a phone. Please wait... Found phone on COM191 Connecting... Mobile Status: SPRD3 Sending preloader... Mobile Status: Spreadtrum Boot Block version 1.1 Sending mainloader... Reading info... Searching for signatures... Resetting FRP lock.. FRP lock is successfully reseted! Performed by 2.0.7.0 Software version. can you add it in blackview selection for users please ?