|
|
 |
|
Welcome to the GSM-Forum forums. You are currently viewing our boards as a guest which gives you limited access to view most discussions and access our other features. Only registered members may post questions, contact other members or search our database of over 8 million posts. Registration is fast, simple and absolutely free so please - Click to REGISTER! If you have any problems with the registration process or your account login, please contact contact us . |
| |||||||
| Register | FAQ | Donate | Forum Rules | Root any Device | ★iPhone Unlock★ | ★ Wholesale Unlock ★ | Direct Unlock Source | Search | Today's Posts | Mark Forums Read |
 |
| | LinkBack | Thread Tools | Display Modes |
02-14-2018, 09:28
| #196 (permalink) |
| No Life Poster  Join Date: Aug 2013
Posts: 649
Member: 2006990 Status: Offline Thanks Meter: 531 |  🐙 Vertex Imoress Start MT6572 Android 6.0 Reset FRP Done! Platform: HOMTOM Selected model: HT7 Please, power phone OFF and connect USB cable. Searching for a phone. Please wait... Found phone on COM4 Detecting Chip Version... HW Chip: MT6580: 6580.0000 HW Version: 8A00.CA00.0000.0000 Connecting... Brom Version: FF BootLoader Version: 01 Searching Download Agent... Selected DA: MTK_AllInOne_DA_v3.3001.2017-09-06.13:15_388644, n.11 Sending Download Agent... DA sent successfully Initializing DA... Synchronizing with DA... NAND Flash: not installed eMMC Flash: .A8011130.3546484D.42100000.0894732D eMMC Flash: Unknown: 05FHMB DA ver: 4.2.9C Initializing Memory Flash.. Initialization successfully completed Sending loaders... Loader send successfuly. Reading Flash Info... EMMC rpmb size: 0 Mb EMMC boot1 size: 4 Mb EMMC boot2 size: 4 Mb EMMC gp1 size: 0 Mb EMMC gp2 size: 0 Mb EMMC gp3 size: 0 Mb EMMC gp4 size: 0 Mb EMMC user area size: 7088 Mb Internal RAM size: 128 Kb External RAM size: 512 Mb Reading partition... Reading info... Brand: Vertex Model: Impress_Star Device: Impress_Star Platform: mt6580 Android version: 6.0 Display ID: R1.V10 Searching for signatures... Resetting FRP lock.. FRP lock is successfully reseted! Backup saved as HOMTOM_HT7_14-02-2018_11-22-01.dump file Performed by 1.1.3 Software version. Thanks Octopus Team Last edited by Octopus box; 02-14-2018 at 10:09. |
 |
| The Following User Says Thank You to Surtax For This Useful Post: |
|
02-14-2018, 14:35
| #197 (permalink) |
| No Life Poster  Join Date: Feb 2005 Location: GSM WORLD
Posts: 2,079
Member: 118520 Status: Offline Thanks Meter: 3,551 | SAMSUNG SM-G570F FRP REMOVE Done SUCCESSFULLY REMOVE FRP(SAMSUNG SM-G570F)USB Platform: SAMSUNG Selected model: SM-G570F Searching for a phone (waiting for ADB device)... Please, press "OK" button on the phone to allow USB debugging.. Reading info... Detected phone model: SM-G570F Firmware compiled date: Tue Oct 3 15:20:26 KST 2017 PDA version: G570FXXU1BQJ1 CSC version: G570FOJV1BQJ1 SW version: G570FXXU1BQI6 Phone SN: xxxxxxxxxxxx Android version: 7.0 (NRD90M) Sales code: XSG Country: UAE HW platform: exynos5 HW Chip: exynos7570 HW Modem: SHANNON305 Security patch level: 2017-08-01 Codename: on5xeltejv Resetting FRP lock.. FRP lock is successfully reseted! Goto "Menu->Settings->Backup and reset" and make "Factory data reset" THANKS OCTOPLUS-BOX TEAM |
| |
| The Following 2 Users Say Thank You to gracy_elec For This Useful Post: |
|
02-14-2018, 14:36
| #198 (permalink) |
| No Life Poster Join Date: Feb 2005 Location: GSM WORLD
Posts: 2,079
Member: 118520 Status: Offline Thanks Meter: 3,551 | HUAWEI TRT-L21A FRP REMOVE Done SUCCESSFULLY REMOVE FRP(HUAWEI TRT-L21A)USB Platform: HUAWEI Selected model: TRT-L21A Put the phone in FastBoot Mode: 1. Remove SD and SIM cards from the phone 2. Power phone OFF 3. Press and hold "Vol-" and insert USB cable 4. Wait until the phone enter in FastBoot Mode Searching for a phone. Please wait... Detected phone model: TRT-L21A Phone SN: xxxxxxxxxxxxx Phone IMEI: xxxxxxxxxxxxxxxxx Connecting to server..OK Authorizing...OK Resetting FRP lock.. If the device didn't reboot automatically, try to reconnect USB cable or re-boot it manually. FRP lock is successfully reseted! THANKS OCTOPLUS-BOX TEAM |
| |
| The Following 2 Users Say Thank You to gracy_elec For This Useful Post: |
|
02-14-2018, 14:38
| #199 (permalink) |
| No Life Poster Join Date: Feb 2005 Location: GSM WORLD
Posts: 2,079
Member: 118520 Status: Offline Thanks Meter: 3,551 | MOTOROLA XT1772 FRP REMOVE Done SUCCESSFULLY REMOVE FRP(MOTOROLA XT1772)USB Platform: MOTOROLA Selected model: XT1772 Please, power phone OFF and connect USB cable. Searching for a phone. Please wait... Found phone on COM99 Detecting Chip Version... HW Chip: MT6735: 0335.0000 HW Version: 8A00.CA00.0000.0000 Connecting... Brom Version: FF BootLoader Version: 01 Searching Download Agent... Selected DA: MTK_AllInOne_DA_v3.3001.2017-09-06.13:15_388644, n.10 Sending Download Agent... DA sent successfully Initializing DA... Synchronizing with DA... NAND Flash: not installed eMMC Flash: .15010051.4531334D.420DC2E4.003F0F27 eMMC Flash: Samsung: QE13MB DA ver: 4.2.9B Initializing Memory Flash.. Initialization successfully completed Sending loaders... Loader send successfuly. Reading Flash Info... EMMC rpmb size: 4 Mb EMMC boot1 size: 4 Mb EMMC boot2 size: 4 Mb EMMC gp1 size: 0 Mb EMMC gp2 size: 0 Mb EMMC gp3 size: 0 Mb EMMC gp4 size: 0 Mb EMMC user area size: 14910 Mb Internal RAM size: 128 Kb External RAM size: 2048 Mb Reading partition... Searching for signatures... Resetting FRP lock.. FRP lock is successfully reseted! THANKS OCTOPLUS-BOX TEAM |
| |
| The Following 2 Users Say Thank You to gracy_elec For This Useful Post: |
|
02-14-2018, 14:39
| #200 (permalink) |
| No Life Poster Join Date: Feb 2005 Location: GSM WORLD
Posts: 2,079
Member: 118520 Status: Offline Thanks Meter: 3,551 | SAMSUNG SM-J710GN FRP REMOVE Done SUCCESSFULLY REMOVE FRP(SAMSUNG SM-J710GN)UART Platform: SAMSUNG Selected model: SM-J710GN Searching for UART interface.. COM3 Connect Samsung Micro UART cable(with 525K resistor), press and hold "Vol-" + "Power" buttons for 15-20 seconds Searching for device. Please wait... Phone found. Rebooting phone in Upload Mode...OK Please connect phone to USB cable.. Searching for a phone. Please wait...OK Reading data... Checking operation...OK Searching for UART interface.. COM3 Connect Samsung Micro UART cable(with 525K resistor), press and hold "Vol-" + "Power" buttons for 15-20 seconds Searching for device. Please wait... Phone found. Resetting FRP lock (1/4 attempt)..success FRP lock is successfully reseted! THANKS OCTOPLUS-BOX TEAM |
| |
| The Following 2 Users Say Thank You to gracy_elec For This Useful Post: |
|
02-14-2018, 14:42
| #201 (permalink) |
| No Life Poster Join Date: Feb 2005 Location: GSM WORLD
Posts: 2,079
Member: 118520 Status: Offline Thanks Meter: 3,551 | SAMSUNG SM-G935F FRP REMOVE Done SUCCESSFULLY REMOVE FRP(SAMSUNG SM-G935F)UART USB Platform: SAMSUNG Selected model: SM-G935F To put SM-G935F into Download Mode, You have to perform the following steps: 1. Reconnect the battery. 2. Press and hold "Volume-" + "Home" + "Power ON" keys. 3. When phone turns on, press "Volume+" key. Searching for a phone. Please wait... Phone found. Initializing.. PIT was read successfully. Searching for UART interface.. COM11 Connect Samsung Micro UART cable(with 525K resistor), press and hold "Vol-" + "Power" buttons for 15-20 seconds Searching for device. Please wait... Resetting FRP lock.. FRP lock is successfully reseted! Wait 3-4 min then goto "Menu -> Settings -> Backup and reset" and make "Factory data reset" THANKS OCTOPLUS-BOX TEAM |
| |
| The Following 2 Users Say Thank You to gracy_elec For This Useful Post: |
|
02-14-2018, 14:45
| #202 (permalink) |
| No Life Poster Join Date: Feb 2005 Location: GSM WORLD
Posts: 2,079
Member: 118520 Status: Offline Thanks Meter: 3,551 | SAMSUNG SM-J320A FRP REMOVE Done SUCCESSFULLY REMOVE FRP(SAMSUNG SM-J320A)UART USB Platform: SAMSUNG Selected model: SM-J320A Searching for UART interface.. COM7 Connect Samsung Micro UART cable(with 525K resistor), press and hold "Vol-" + "Power" buttons for 15-20 seconds Searching for device. Please wait... Phone found. Rebooting phone in Upload Mode...OK Please connect phone to USB cable.. Searching for a phone. Please wait...OK Reading data... Checking operation... Searching for UART interface.. COM7 Connect Samsung Micro UART cable(with 525K resistor), press and hold "Vol-" + "Power" buttons for 15-20 seconds Searching for device. Please wait... Phone found. Resetting FRP lock (1/2 attempt)..success FRP lock is successfully reseted! THANKS OCTOPLUS-BOX TEAM |
| |
| The Following 2 Users Say Thank You to gracy_elec For This Useful Post: |
|
02-14-2018, 16:06
| #203 (permalink) |
| Freak Poster  Join Date: Jun 2012 Location: Iran-Behbahan Age: 41
Posts: 458
Member: 1778926 Status: Offline Thanks Meter: 60 | 🐙 World's first SM-A510F binary 5 FRP remove successfully done hi in binary 5 all ways such as real term calculator and talkback closed by samsung and there is no engboot or combi file for this binary.but by this power of frp tool magic done Welcome to Octoplus FRP Tool v.1.1.3 Platform: SAMSUNG Selected model: SM-A510F Searching for UART interface.. Found more then one box connected to COM47 COM47 Connect Samsung Micro UART cable(with 525K resistor), press and hold "Vol-" + "Power" buttons for 15-20 seconds Searching for device. Please wait... Phone found. Rebooting phone in Upload Mode...OK Please connect phone to USB cable.. Searching for a phone. Please wait...OK Reading data... Checking operation...OK Searching for UART interface.. Found more then one box connected to COM47 COM47 Connect Samsung Micro UART cable(with 525K resistor), press and hold "Vol-" + "Power" buttons for 15-20 seconds Searching for device. Please wait... Phone found. Searching for UART interface.. Found more then one box connected to COM47 COM47 Connect Samsung Micro UART cable(with 525K resistor), press and hold "Vol-" + "Power" buttons for 15-20 seconds Searching for device. Please wait... Phone found. Resetting FRP lock..success FRP lock is successfully reseted! Performed by 1.1.3 Software version. Last edited by Octopus box; 02-14-2018 at 16:34. |
| |
| The Following 2 Users Say Thank You to 10256929 For This Useful Post: |
|
02-15-2018, 07:32
| #204 (permalink) |
| No Life Poster Join Date: Feb 2005 Location: GSM WORLD
Posts: 2,079
Member: 118520 Status: Offline Thanks Meter: 3,551 | LG H812 FRP REMOVE Done SUCCESSFULLY REMOVE FRP(LG H812)USB Platform: LG Selected model: H812 Put the phone into Download Mode: 1. Power phone OFF; 2. Press and hold "Vol+" button and connect USB cable. Searching for a phone. Please wait... Found phone on COM234 Reading info... Detected phone model: LG-H812 Mode: Emergency Initializing.. SW version: LGH812AT-00-V10n-302-720-DEC-0 Android version: 5.1 Reading partition... Resetting FRP lock.. FRP lock is successfully reseted! THANKS OCTOPLUS-BOX TEAM |
| |
|
02-15-2018, 07:33
| #205 (permalink) |
| No Life Poster Join Date: Feb 2005 Location: GSM WORLD
Posts: 2,079
Member: 118520 Status: Offline Thanks Meter: 3,551 | SAMSUNG SM-A310F FRP REMOVE Done SUCCESSFULLY REMOVE FRP(SAMSUNG SM-A310F)UART & USB Platform: SAMSUNG Selected model: SM-A310F Searching for UART interface.. COM120 Connect Samsung Micro UART cable(with 525K resistor), press and hold "Vol-" + "Power" buttons for 15-20 seconds Searching for device. Please wait... Phone found. Rebooting phone in Upload Mode...OK Please connect phone to USB cable.. Searching for a phone. Please wait...OK Reading data... Checking operation...OK Searching for UART interface.. COM120 Connect Samsung Micro UART cable(with 525K resistor), press and hold "Vol-" + "Power" buttons for 15-20 seconds Searching for device. Please wait... Phone found. Resetting FRP lock (1/2 attempt)..unsuccessful Searching for UART interface.. COM120 Connect Samsung Micro UART cable(with 525K resistor), press and hold "Vol-" + "Power" buttons for 15-20 seconds Searching for device. Please wait... Phone found. Resetting FRP lock (2/2 attempt)..success FRP lock is successfully reseted! THANKS OCTOPLUS-BOX TEAM |
| |
|
02-15-2018, 07:33
| #206 (permalink) |
| No Life Poster Join Date: Feb 2005 Location: GSM WORLD
Posts: 2,079
Member: 118520 Status: Offline Thanks Meter: 3,551 | SAMSUNG SM-G930F FRP REMOVE Done SUCCESSFULLY REMOVE FRP(SAMSUNG SM-G930F)UART & USB Platform: SAMSUNG Selected model: SM-G930F To put SM-G930F into Download Mode, You have to perform the following steps: 1. Reconnect the battery. 2. Press and hold "Volume-" + "Home" + "Power ON" keys. 3. When phone turns on, press "Volume+" key. Searching for a phone. Please wait... Phone found. Initializing.. PIT was read successfully. Searching for UART interface.. COM5 Connect Samsung Micro UART cable(with 525K resistor), press and hold "Vol-" + "Power" buttons for 15-20 seconds Searching for device. Please wait... Resetting FRP lock.. FRP lock is successfully reseted! Wait 3-4 min then goto "Menu -> Settings -> Backup and reset" and make "Factory data reset" THANKS OCTOPLUS-BOX TEAM |
| |
| The Following 3 Users Say Thank You to gracy_elec For This Useful Post: |
|
02-15-2018, 07:33
| #207 (permalink) |
| No Life Poster Join Date: Feb 2005 Location: GSM WORLD
Posts: 2,079
Member: 118520 Status: Offline Thanks Meter: 3,551 | MOTOROLA C XT-1750 FRP REMOVE Done SUCCESSFULLY REMOVE FRP(MOTOROLA C XT-1750)USB Platform: MOTOROLA Selected model: XT1750 Please, power phone OFF and connect USB cable. Searching for a phone. Please wait... Found phone on COM72 Detecting Chip Version... HW Chip: MT6580: 6580.0000 HW Version: 8A00.CA00.0000.0000 Connecting... Brom Version: FF BootLoader Version: 01 Searching Download Agent... Selected DA: MTK_AllInOne_DA_Octoplus_v1.0, n.0 Sending Download Agent... DA sent successfully Initializing DA... Synchronizing with DA... NAND Flash: not installed eMMC Flash: .15010046.4E58324D.4201BBC4.DE433471 eMMC Flash: Samsung: FNX2MB DA ver: 4.2.94 Initializing Memory Flash.. Initialization successfully completed Sending loaders... Loader send successfuly. Reading Flash Info... EMMC rpmb size: 0 Mb EMMC boot1 size: 4 Mb EMMC boot2 size: 4 Mb EMMC gp1 size: 0 Mb EMMC gp2 size: 0 Mb EMMC gp3 size: 0 Mb EMMC gp4 size: 0 Mb EMMC user area size: 7456 Mb Internal RAM size: 128 Kb External RAM size: 1024 Mb Reading partition... Searching for signatures... Resetting FRP lock.. Backup saved as MOTOROLA_XT1750_10-01-2018_18-05-45.dump file FRP lock is successfully reseted! THANKS OCTOPLUS-BOX TEAM |
| |
|
02-15-2018, 07:34
| #208 (permalink) |
| No Life Poster Join Date: Feb 2005 Location: GSM WORLD
Posts: 2,079
Member: 118520 Status: Offline Thanks Meter: 3,551 | SAMSUNG SM-J320H FRP REMOVE Done SUCCESSFULLY REMOVE FRP(SAMSUNG SM-J320H)USB Platform: SAMSUNG Selected model: SM-J320H Reset FRP/ Reactivation lock operation for SM-J320H will delete all user data on the phone (contacts, pictures and others)! NOTE: You can reset FRP/ Reactivation without losing user data via Factory Reset FRP/ Reactivation service. Connecting to server... Connecting to server...Ok! Checking resource files... Downloading resources... All necessary resource files have been downloaded successfully. Please put the phone into Download Mode and connect USB cable. To put SM-J320H into Download Mode, You have to perform the following steps: 1. Reconnect the battery. 2. Press and hold "Volume-" + "Home" + "Power ON" keys. 3. When phone turns on, press "Volume+" key. Waiting for phone... Firmware write started. Writing Custom section... Custom section has been written successfully. Firmware writing successfully completed. FRP lock is successfully reseted! Wait 3-4 min then goto "Menu -> Settings -> Backup and reset" and make "Factory data reset" THANKS OCTOPLUS-BOX TEAM |
| |
|
02-15-2018, 07:34
| #209 (permalink) |
| No Life Poster Join Date: Feb 2005 Location: GSM WORLD
Posts: 2,079
Member: 118520 Status: Offline Thanks Meter: 3,551 | SAMSUNG SM-A520F FRP REMOVE Done SUCCESSFULLY REMOVE FRP(SAMSUNG SM-A520F)USB Platform: SAMSUNG Selected model: SM-A520F Searching for a phone (waiting for ADB device)... ADB server killed. Please, press "OK" button on the phone to allow USB debugging.. Reading info... Detected phone model: SM-J730G Firmware compiled date: Mon Oct 30 11:47:34 KST 2017 PDA version: FA70_J730GDXU2AQJ3 CSC version: unknown SW version: J730GDXU2AQJ1 Phone SN: R58J66APP0R Android version: 7.0 (NRD90M) Sales code: unknown Country: unknown HW platform: exynos5 HW Chip: exynos7870 HW Modem: SHANNON315 Security patch level: 2017-05-01 Codename: j7y17ltedx Resetting FRP lock.. FRP lock is successfully reseted! Goto "Menu->Settings->Backup and reset" and make "Factory data reset" THANKS OCTOPLUS-BOX TEAM |
| |
| The Following 3 Users Say Thank You to gracy_elec For This Useful Post: |
|
02-15-2018, 10:00
| #210 (permalink) |
| Freak Poster Join Date: Oct 2010 Location: Europe
Posts: 389
Member: 1429766 Status: Offline Thanks Meter: 80 | 🐙 LG M200N FRP Reset successfully DONE with downgrade After days of struggling to remove the FRP of LG M200N with SW version: LGM200nAT-00-V10i-EUR-XX-NOV-1 i managed to do it by downgrading to this firmware M200n10g_00_OPEN_EU_OP_0710. Hope this will help you! Enjoy! Code: Welcome to Octoplus FRP Tool v.1.1.3 Platform: LG Selected model: M200N Put the phone into Download Mode: 1. Power phone OFF; 2. Press and hold "Vol+" button and connect USB cable. Searching for a phone. Please wait... Found phone on COM101 Reading info... Detected phone model: LG-M200n Mode: Emergency Initializing.. SW version: LGM200nAT-00-V10i-EUR-XX-NOV-1 Android version: 7.0 Performed by 1.1.3 Software version. Platform: LG Selected model: M200N Put the phone into Download Mode: 1. Power phone OFF; 2. Press and hold "Vol+" button and connect USB cable. Searching for a phone. Please wait... Found phone on COM101 Reading info... Detected phone model: LG-M200n Mode: Emergency Initializing.. SW version: LGM200nAT-00-V10i-EUR-XX-NOV-1 Android version: 7.0 Writing firmware... Opening "M200n10g_00_OPEN_EU_OP_0710.kdz"... Firmware version: LGM200AT-00-V10k-GLOBAL-COM-JUL-10-2017+0 Firmware model: LG-M200 Writing phone firmware without real necessity is at your own risk. Downgrade may lead to phone damage! Please, make sure the phone's battery is fully charged. Disconnect all other devices from the computer (including phones, modems, etc.) and close all other running programs. To avoid errors in the flashing process, use a clean PC (without any installed drivers for other devices). You should not run any other programs or attach new devices to your computer during the flashing! Prepairing firmware... Setting options... Reading partition... Formating USERDATA section Formating ENCRYPT section Writing signature... Writing 1/74 PrimaryGPT_0.bin section... Writing 2/74 modem_16384.bin section... Writing 3/74 aboot_196608.bin section... Writing 4/74 abootbak_200704.bin section... Writing 5/74 tz_204800.bin section... Writing 6/74 tzbak_208896.bin section... Writing 7/74 sbl1_212992.bin section... Writing 8/74 sbl1bak_215040.bin section... Writing 9/74 rpm_217088.bin section... Writing 10/74 rpmbak_218112.bin section... Writing 11/74 devcfg_219136.bin section... Writing 12/74 devcfgbak_220160.bin section... Writing 13/74 cmnlib_221184.bin section... Writing 14/74 cmnlibbak_222208.bin section... Writing 15/74 cmnlib64_223232.bin section... Writing 16/74 cmnlib64bak_224256.bin section... Writing 17/74 keymaster_225280.bin section... Writing 18/74 keymasterbak_226304.bin section... Writing 19/74 dsp_278528.bin section... Writing 20/74 sec_397312.bin section... Writing 22/74 apdp_402432.bin section... Writing 23/74 msadp_403456.bin section... Writing 24/74 boot_409600.bin section... Writing 25/74 laf_475136.bin section... Writing 26/74 lafbak_540672.bin section... Writing 27/74 recovery_606208.bin section... Writing 28/74 recoverybak_671744.bin section... Writing 29/74 factory_737280.bin section... Writing 30/74 raw_resources_851968.bin section... Writing 31/74 raw_resourcesbak_860160.bin section... Writing 32/74 persist_868352.bin section... Writing 33/74 system_999424.bin section... Writing 34/74 system_1263432.bin section... Writing 35/74 system_1267488.bin section... Writing 36/74 system_1527768.bin section... Writing 37/74 system_1787720.bin section... Writing 38/74 system_1791776.bin section... Writing 39/74 system_2052056.bin section... Writing 40/74 system_2312008.bin section... Writing 41/74 system_2316064.bin section... Writing 42/74 system_2576344.bin section... Writing 43/74 system_2834432.bin section... Writing 44/74 system_2836296.bin section... Writing 45/74 system_2840352.bin section... Writing 46/74 system_3100632.bin section... Writing 47/74 system_3358720.bin section... Writing 48/74 system_3360584.bin section... Writing 49/74 system_3364640.bin section... Writing 50/74 system_3624920.bin section... Writing 51/74 system_3883008.bin section... Writing 52/74 system_3887064.bin section... Writing 53/74 system_4149208.bin section... Writing 54/74 system_4411352.bin section... Writing 55/74 system_4673496.bin section... Writing 56/74 system_4935640.bin section... Writing 57/74 system_5197784.bin section... Writing 58/74 system_5459928.bin section... Writing 59/74 system_5722072.bin section... Writing 60/74 system_5984216.bin section... Writing 61/74 system_6246360.bin section... Writing 62/74 system_6508504.bin section... Writing 63/74 system_6770648.bin section... Writing 64/74 system_7032792.bin section... Writing 65/74 system_7294936.bin section... Writing 66/74 system_7554888.bin section... Writing 67/74 system_7558944.bin section... Writing 68/74 system_7819224.bin section... Writing 69/74 system_8079176.bin section... Writing 70/74 system_8083232.bin section... Writing 71/74 system_8342528.bin section... Writing 72/74 cust_9625600.bin section... Writing 73/74 BackupGPT_20970496.bin section... Writing 74/74 OP_OPEN_EU.img section... Reading partition... Formating RCT section Formating MPT section Finalizing... Firmware Write successfully. Performed by 1.1.3 Software version. Platform: LG Selected model: M200N Put the phone into Download Mode: 1. Power phone OFF; 2. Press and hold "Vol+" button and connect USB cable. Searching for a phone. Please wait... Found phone on COM101 Reading info... Detected phone model: LG-M200n Mode: Emergency Initializing.. SW version: LGM200nAT-00-V10g-EUR-XX-JUL-1 Android version: 7.0 Reset FRP operation for M200N will delete all user data on the phone (contacts, pictures and others)! Do You want to continue? Reading partition... Resetting FRP lock.. Writing loader... Writing userdata... Formating encrypt section Restoring loader... Perform factory reset to complete operation! FRP lock is successfully reseted! Performed by 1.1.3 Software version. Last edited by Octopus box; 02-15-2018 at 10:11. |
| |
| The Following User Says Thank You to xukca For This Useful Post: |
|
| Bookmarks |
| Thread Tools | |
| Display Modes | |
| |
|
|
Linear Mode
