GSM Shop GSM Shop
GSM-Forum  

Welcome to the GSM-Forum forums.

You are currently viewing our boards as a guest which gives you limited access to view most discussions and access our other features.
Only registered members may post questions, contact other members or search our database of over 8 million posts.

Registration is fast, simple and absolutely free so please - Click to REGISTER!

If you have any problems with the registration process or your account login, please contact contact us .

Go Back   GSM-Forum > Product Support Sections > Hard/Software Products (official support) > Octopus/Octoplus > Octoplus FRP Tool

Reply
 
LinkBack Thread Tools Display Modes
Old 02-15-2018, 11:58   #211 (permalink)
No Life Poster
 
Join Date: May 2009
Location: pattaya
Posts: 1,103
Member: 1043111
Status: Offline
Sonork: 1000.2
Thanks Meter: 385
Samsung SM-A510F (A510FXXU5CRA4) Reset FRP successfully done


A510FXXU5CRA4 done.

Welcome to Octoplus FRP Tool v.1.1.3
Platform: SAMSUNG
Selected model: SM-A510F
Searching for UART interface.. COM55
Connect Samsung Micro UART cable(with 525K resistor), press and hold "Vol-" + "Power" buttons for 15-20 seconds
Searching for device. Please wait...
Phone found.
Rebooting phone in Upload Mode...OK
Please connect phone to USB cable..
Searching for a phone. Please wait...OK
Reading data...
Checking operation...OK
Searching for UART interface.. COM55
Connect Samsung Micro UART cable(with 525K resistor), press and hold "Vol-" + "Power" buttons for 15-20 seconds
Searching for device. Please wait...
Phone found.
Searching for UART interface.. COM55
Connect Samsung Micro UART cable(with 525K resistor), press and hold "Vol-" + "Power" buttons for 15-20 seconds
Searching for device. Please wait...
Phone found.
Resetting FRP lock..success
FRP lock is successfully reseted!
Performed by 1.1.3 Software version.

Last edited by Octopus box; 02-15-2018 at 12:06.
  Reply With Quote
The Following User Says Thank You to wsmobile For This Useful Post:
Old 02-16-2018, 05:10   #212 (permalink)
No Life Poster
 
MARVZ_TG's Avatar
 
Join Date: Mar 2009
Location: YT - Channel RealFix-GRS.TV
Age: 36
Posts: 2,495
Member: 990711
Status: Offline
Sonork: 100.1597405
Thanks Meter: 1,778
Donate money to this user
Thumbs up LGM-X320S FRP Remove World First by Octoplus FRP Tool

LGM-X320S FRP Remove World First by Octoplus FRP Tool

Platform: LG
Selected model: M400DK
Put the phone into Download Mode:
1. Power phone OFF;
2. Press and hold "Vol+" button and connect USB cable.
Searching for a phone. Please wait...
Found phone on COM180
Reading info...
Detected phone model: LGM-X320S
Warning: Selected model (M400DK) differs from the detected one (LGM-X320S)!
Mode: Emergency
Initializing..
SW version: LGMX320SAT-00-V10f-SKT-KR-JUL-
Android version: 7.0
Reset FRP operation for M400DK will delete all user data on the phone (contacts, pictures and others)!
Do You want to continue?
Reading partition...
Resetting FRP lock..
Writing loader...
Writing userdata...
Formating encrypt section
Restoring loader...
Perform factory reset to complete operation!
FRP lock is successfully reseted!
Performed by 1.1.3 Software version.

Last edited by Octopus box; 02-16-2018 at 06:31.
  Reply With Quote
The Following User Says Thank You to MARVZ_TG For This Useful Post:
Old 02-16-2018, 11:40   #213 (permalink)
No Life Poster
 
rebainoor's Avatar
 
Join Date: Feb 2006
Location: In my LAB
Posts: 3,162
Member: 231728
Status: Offline
Thanks Meter: 2,102
Donate money to this user
Thumbs up HUAWEI BLN-L21 Reset FRP successfully done

INFO : 16/02/2018 11:17:29 > Welcome to Octoplus FRP Tool v.1.1.3
INFO : 16/02/2018 11:18:54 > Platform: HUAWEI
INFO : 16/02/2018 11:18:54 > Selected model: BLN-L21
INFO : 16/02/2018 11:18:54 > Put the phone in FastBoot Mode:
INFO : 16/02/2018 11:18:54 > 1. Remove SD and SIM cards from the phone
INFO : 16/02/2018 11:18:54 > 2. Power phone OFF
INFO : 16/02/2018 11:18:54 > 3. Press and hold "Vol-" and insert USB cable
INFO : 16/02/2018 11:18:54 > 4. Wait until the phone enter in FastBoot Mode
INFO : 16/02/2018 11:18:54 > Searching for a phone. Please wait...
INFO : 16/02/2018 11:18:54 > Detected phone model: BLN-L21
INFO : 16/02/2018 11:18:54 > Phone SN: 6AGDU17320001226
INFO : 16/02/2018 11:18:54 > Phone IMEI: 864595030012250
INFO : 16/02/2018 11:18:54 > Phone IMEI2: 864595030043263
INFO : 16/02/2018 11:18:54 > SW version: BLN-L21C432B369
INFO : 16/02/2018 11:18:54 > Connecting to server..
INFO : 16/02/2018 11:18:54 > OK
INFO : 16/02/2018 11:18:54 > Authorizing...
INFO : 16/02/2018 11:18:55 > OK
INFO : 16/02/2018 11:18:55 > Resetting FRP lock..
WARN : 16/02/2018 11:19:00 > If the device didn't reboot automatically, try to reconnect USB cable or re-boot it manually.
WARN : 16/02/2018 11:19:00 > FRP lock is successfully reseted!
INFO : 16/02/2018 11:19:00 > Performed by 1.1.3 Software version.
  Reply With Quote
The Following User Says Thank You to rebainoor For This Useful Post:
Old 02-16-2018, 11:42   #214 (permalink)
No Life Poster
 
rebainoor's Avatar
 
Join Date: Feb 2006
Location: In my LAB
Posts: 3,162
Member: 231728
Status: Offline
Thanks Meter: 2,102
Donate money to this user
HUAWEI PLK-L01 Reset FRP successfully done

INFO : 16/02/2018 11:24:01 > Welcome to Octoplus FRP Tool v.1.1.3
INFO : 16/02/2018 11:25:08 > Platform: HUAWEI
INFO : 16/02/2018 11:25:08 > Selected model: _TEST-MODE
INFO : 16/02/2018 11:25:08 > Put the phone in FastBoot Mode:
INFO : 16/02/2018 11:25:08 > 1. Remove SD and SIM cards from the phone
INFO : 16/02/2018 11:25:08 > 2. Power phone OFF
INFO : 16/02/2018 11:25:08 > 3. Press and hold "Vol-" and insert USB cable
INFO : 16/02/2018 11:25:08 > 4. Wait until the phone enter in FastBoot Mode
INFO : 16/02/2018 11:25:08 > Searching for a phone. Please wait...
INFO : 16/02/2018 11:25:08 > Detected phone model: PLK-L01
INFO : 16/02/2018 11:25:08 > Phone SN: H8WDU15C25002409
INFO : 16/02/2018 11:25:08 > Phone IMEI: 867898027844199
INFO : 16/02/2018 11:25:08 > Connecting to server..
INFO : 16/02/2018 11:25:08 > OK
INFO : 16/02/2018 11:25:08 > Authorizing...
INFO : 16/02/2018 11:25:09 > OK
INFO : 16/02/2018 11:25:09 > Resetting FRP lock..
WARN : 16/02/2018 11:25:15 > If the device didn't reboot automatically, try to reconnect USB cable or re-boot it manually.
WARN : 16/02/2018 11:25:15 > FRP lock is successfully reseted!
INFO : 16/02/2018 11:25:15 > Performed by 1.1.3 Software version.
  Reply With Quote
The Following User Says Thank You to rebainoor For This Useful Post:
Old 02-16-2018, 11:43   #215 (permalink)
No Life Poster
 
rebainoor's Avatar
 
Join Date: Feb 2006
Location: In my LAB
Posts: 3,162
Member: 231728
Status: Offline
Thanks Meter: 2,102
Donate money to this user
LG-M160 FRP Reset successfully done

INFO : 16/02/2018 11:30:15 > Platform: LG
INFO : 16/02/2018 11:30:15 > Selected model: M160
WARN : 16/02/2018 11:30:15 > Put the phone into Download Mode:
WARN : 16/02/2018 11:30:15 > 1. Power phone OFF;
WARN : 16/02/2018 11:30:15 > 2. Press and hold "Vol+" button and connect USB cable.
INFO : 16/02/2018 11:30:15 > Searching for a phone. Please wait...
INFO : 16/02/2018 11:30:16 > Found phone on COM186
INFO : 16/02/2018 11:30:16 > Reading info...
INFO : 16/02/2018 11:30:17 > Detected phone model: LG-M160
INFO : 16/02/2018 11:30:17 > Mode: Emergency
INFO : 16/02/2018 11:30:17 > Initializing..
INFO : 16/02/2018 11:30:19 > SW version: LGM160AT-00-V10b-ORG-MCV-JAN-1
INFO : 16/02/2018 11:30:19 > Android version: 6.0.1
INFO : 16/02/2018 11:30:19 > Reading partition...
INFO : 16/02/2018 11:30:19 > Resetting FRP lock..
INFO : 16/02/2018 11:30:20 > Trying to repeat..
WARN : 16/02/2018 11:30:21 > FRP lock is successfully reseted!
INFO : 16/02/2018 11:30:21 > Performed by 1.1.3 Software version.
INFO : 16/02/2018 11:30:21 >

Last edited by Octopus box; 02-16-2018 at 11:48.
  Reply With Quote
The Following User Says Thank You to rebainoor For This Useful Post:
Old 02-16-2018, 11:48   #216 (permalink)
No Life Poster
 
rebainoor's Avatar
 
Join Date: Feb 2006
Location: In my LAB
Posts: 3,162
Member: 231728
Status: Offline
Thanks Meter: 2,102
Donate money to this user
Thumbs up samsung SM-J500F frp rest done (ADB mode)

INFO : 16/02/2018 11:43:27 > Welcome to Octoplus FRP Tool v.1.1.4
INFO : 16/02/2018 11:45:16 > Platform: SAMSUNG
INFO : 16/02/2018 11:45:16 > Selected model: SM-J500F
INFO : 16/02/2018 11:45:17 > Searching for a phone (waiting for ADB device)...
WARN : 16/02/2018 11:45:18 > Please, press "OK" button on the phone to allow USB debugging..
INFO : 16/02/2018 11:45:21 > Reading info...
INFO : 16/02/2018 11:45:24 > Detected phone model: SM-J500F
INFO : 16/02/2018 11:45:24 > Firmware compiled date: Wed Aug 2 20:55:37 KST 2017
INFO : 16/02/2018 11:45:24 > PDA version: J500FXXU1BQH1
INFO : 16/02/2018 11:45:24 > CSC version: J500FOXX1BQG2
INFO : 16/02/2018 11:45:24 > SW version: J500FXXU1BPF2
INFO : 16/02/2018 11:45:24 > Phone SN: RV8H412BJ6V
INFO : 16/02/2018 11:45:24 > Android version: 6.0.1 (MMB29M)
INFO : 16/02/2018 11:45:24 > Sales code: ROM
INFO : 16/02/2018 11:45:24 > Country: Romania
INFO : 16/02/2018 11:45:24 > HW platform: msm8916
INFO : 16/02/2018 11:45:24 > HW Chip: MSM8916
INFO : 16/02/2018 11:45:24 > HW Modem: MSM8916
INFO : 16/02/2018 11:45:24 > Security patch level: 2017-08-01
INFO : 16/02/2018 11:45:24 > Codename: j5ltexx
INFO : 16/02/2018 11:45:24 > Resetting FRP lock..
WARN : 16/02/2018 11:45:49 > FRP lock is successfully reseted!
BINF : 16/02/2018 11:45:49 > Goto "Menu->Settings->Backup and reset" and make "Factory data reset"
INFO : 16/02/2018 11:45:49 > Performed by 1.1.4 Software version.
  Reply With Quote
The Following User Says Thank You to rebainoor For This Useful Post:
Old 02-16-2018, 11:55   #217 (permalink)
No Life Poster
 
rebainoor's Avatar
 
Join Date: Feb 2006
Location: In my LAB
Posts: 3,162
Member: 231728
Status: Offline
Thanks Meter: 2,102
Donate money to this user
Thumbs up MEIZU_M3S FRP reset done with success

INFO : 16/02/2018 11:53:07 > Platform: MEIZU
INFO : 16/02/2018 11:53:07 > Selected model: M3S (Y6785H)
WARN : 16/02/2018 11:53:07 > Please, power phone OFF and connect USB cable.
INFO : 16/02/2018 11:53:07 > Searching for a phone. Please wait...
INFO : 16/02/2018 11:53:12 > Found phone on COM38
INFO : 16/02/2018 11:53:13 > Detecting Chip Version...
INFO : 16/02/2018 11:53:13 > HW Chip: MT6755: 0326.0000
INFO : 16/02/2018 11:53:13 > HW Version: 8A00.CB00.0001.0000
INFO : 16/02/2018 11:53:13 > HW Chip: MT6750: 00000442
INFO : 16/02/2018 11:53:13 > Connecting...
INFO : 16/02/2018 11:53:13 > Brom Version: FF
INFO : 16/02/2018 11:53:13 > BootLoader Version: 01
INFO : 16/02/2018 11:53:13 > Searching Download Agent...
INFO : 16/02/2018 11:53:13 > Selected DA: MTK_AllInOne_DA_Octoplus_v1.0_PL, n.0
INFO : 16/02/2018 11:53:13 > Sending Download Agent...
INFO : 16/02/2018 11:53:13 > DA sent successfully
INFO : 16/02/2018 11:53:13 > Initializing DA...
INFO : 16/02/2018 11:53:13 > Synchronizing with DA...
INFO : 16/02/2018 11:53:15 > Mobile Status: SYNC
INFO : 16/02/2018 11:53:15 > DA ver: 2099.3.3
INFO : 16/02/2018 11:53:15 > Mobile Status: preloader
INFO : 16/02/2018 11:53:15 > Initializing Memory Flash..
INFO : 16/02/2018 11:53:15 > Initialization successfully completed
INFO : 16/02/2018 11:53:15 > Sending loaders...
INFO : 16/02/2018 11:53:15 > Mobile Status: SYNC
INFO : 16/02/2018 11:53:15 > Reading Flash Info...
INFO : 16/02/2018 11:53:15 > EMMC rpmb size: 4 Mb
INFO : 16/02/2018 11:53:15 > EMMC boot1 size: 4 Mb
INFO : 16/02/2018 11:53:15 > EMMC boot2 size: 4 Mb
INFO : 16/02/2018 11:53:15 > EMMC gp1 size: 0 Mb
INFO : 16/02/2018 11:53:15 > EMMC gp2 size: 0 Mb
INFO : 16/02/2018 11:53:15 > EMMC gp3 size: 0 Mb
INFO : 16/02/2018 11:53:15 > EMMC gp4 size: 0 Mb
INFO : 16/02/2018 11:53:15 > EMMC user area size: 29820 Mb
INFO : 16/02/2018 11:53:15 > eMMC Flash: .15010052.5831424D.4207F799.E058730D
INFO : 16/02/2018 11:53:15 > eMMC Flash: Samsung: RX1BMB
INFO : 16/02/2018 11:53:15 > Internal RAM size: 256 Kb
INFO : 16/02/2018 11:53:15 > External RAM size: 3072 Mb
INFO : 16/02/2018 11:53:15 > Reading partition...
INFO : 16/02/2018 11:53:15 > Reading info...
INFO : 16/02/2018 11:53:15 > Brand: Meizu
INFO : 16/02/2018 11:53:15 > Model: M3s
INFO : 16/02/2018 11:53:15 > Device: M3s
INFO : 16/02/2018 11:53:15 > Platform: mt6750
INFO : 16/02/2018 11:53:15 > Android version: 5.1
INFO : 16/02/2018 11:53:15 > Display ID: Flyme 6.2.0.0G
INFO : 16/02/2018 11:53:15 > Searching for signatures...
INFO : 16/02/2018 11:53:15 > Resetting FRP lock..
WARN : 16/02/2018 11:53:16 > FRP lock is successfully reseted!
INFO : 16/02/2018 11:53:16 > Backup saved as MEIZU_M3S (Y6785H)_16-02-2018_11-53-15.dump file
INFO : 16/02/2018 11:53:16 > Performed by 1.1.4 Software version.
INFO : 16/02/2018 11:53:16 >

Last edited by Octopus box; 02-16-2018 at 12:12.
  Reply With Quote
The Following User Says Thank You to rebainoor For This Useful Post:
Old 02-16-2018, 16:21   #218 (permalink)
No Life Poster
 
Dr_Wolodya's Avatar
 
Join Date: Jul 2004
Location: Ukraine
Age: 44
Posts: 2,727
Member: 75408
Status: Offline
Thanks Meter: 1,190
Success reset FRP on Motorola XT1540

Success reset FRP on Motorola XT1540:
Code:
Welcome to Octoplus FRP Tool v.1.1.4
Platform: MOTOROLA
Selected model: XT1540
Put the phone into Factory Mode: 
1. Power phone OFF; 
2. Press and hold "Vol-" + "Power" buttons; 
3. Select Factory Mode, then confirm your selection; 
4. Wait until the phone Power ON; 
5. Connect USB cable.
Searching for a phone. Please wait...
Phone found.
Reading info...
Phone model: EAAAANVZ
Firmware released date: Mar 13 2017
Firmware released time: 03:30:41
Firmware compiled date: Nov 22 2015
Firmware compiled time: 23:00:00
SW version: MPSS.DPM.2.0.2.c1.8-00044-M8936FAAAANUZM-1
Enabling "USB Debugging" mode...
Put the phone in Factory Mode:
1. Disconnect USB cable;
2. Power OFF the phone;
3. Press "Vol-" and "Power" buttons;
4. Select Factory Mode then confirm your selection;
5. Wait until phone is power ON and connect USB Cable;
6. Install necesarry drivers then press "OK" button
Please, press "OK" button on the phone to allow USB debugging..
Searching for a phone (waiting for ADB device)...
Phone found.
Reading info...
Phone model: motorola MotoG3
SW version: MCIS24.107-82-18
Date: Thu Apr  6 04:48:21 CDT 2017
Android version: 6.0.1
Baseband M8916_2020632.44.03.21.54.01R OSPREY_RETUSA_AWS_CUST
Detected phone model: XT1540
Resetting FRP lock..
FRP lock is successfully reseted!
Performed by 1.1.4 Software version.

Last edited by Octopus box; 02-16-2018 at 16:59.
  Reply With Quote
The Following User Says Thank You to Dr_Wolodya For This Useful Post:
Old 02-16-2018, 23:24   #219 (permalink)
No Life Poster
 
rasgula's Avatar
 
Join Date: Feb 2005
Location: Canada
Posts: 1,278
Member: 119464
Status: Offline
Thanks Meter: 288
Thumbs up Moto XT 1601 FRP Reset successfully

Moto XT 1601 FRP Reset successfully:

Code:
Welcome to Octoplus FRP Tool v.1.1.4
Platform: MOTOROLA
Selected model: XT1602
Put the phone into Factory Mode: 
1. Power phone OFF; 
2. Press and hold "Vol-" + "Power" buttons; 
3. Select Factory Mode, then confirm your selection; 
4. Wait until the phone Power ON; 
5. Connect USB cable.
Searching for a phone. Please wait...
Phone found.
Reading info...
Phone model: EAAAANVZ
Firmware released date: Jan 21 2017
Firmware released time: 15:32:07
Firmware compiled date: Dec 09 2016
Firmware compiled time: 19:00:00
SW version: MPSS.DPM.2.0.2.c1.21-00008-M8936FAAAANUZM-1.62336.1.80536.1
Enabling "USB Debugging" mode...
Put the phone in Factory Mode:
1. Disconnect USB cable;
2. Power OFF the phone;
3. Press "Vol-" and "Power" buttons;
4. Select Factory Mode then confirm your selection;
5. Wait until phone is power ON and connect USB Cable;
6. Install necesarry drivers then press "OK" button
Please, press "OK" button on the phone to allow USB debugging..
Searching for a phone (waiting for ADB device)...
Phone found.
Reading info...
Phone model: motorola Moto G Play
SW version: MPIS24.241-15.3-21
Date: Sun May 21 23:55:05 CDT 2017
Android version: 6.0.1
Baseband M8916_20250106.08.05.14.01R HARPIA_LATAM_CUST
Detected phone model: XT1601
Resetting FRP lock..
FRP lock is successfully reseted!
Performed by 1.1.4 Software version.

Last edited by Octopus box; 02-17-2018 at 12:04.
  Reply With Quote
The Following User Says Thank You to rasgula For This Useful Post:
Old 02-17-2018, 02:09   #220 (permalink)
Freak Poster
 
Join Date: Sep 2011
Location: philippines
Posts: 385
Member: 1649546
Status: Offline
Thanks Meter: 123
Thumbs up 🐙 Thanks, team, Samsung SM-G532G Reset FRP successfully done

Welcome to Octoplus FRP Tool v.1.1.4
Platform: SAMSUNG
Selected model: SM-G532G
Searching for a phone (waiting for ADB device)...
Please, press "OK" button on the phone to allow USB debugging..
Reading info...
Detected phone model: SM-G532G
Firmware compiled date: Thu Sep 21 17:59:11 KST 2017
PDA version: G532GDXU1AQI2
CSC version: G532GOLD1AQI2
SW version: G532GDXU1AQA3
Phone SN: R58JC2S0KRZ
Android version: 6.0.1 (MMB29T)
Sales code: XTC
Country: PHILIPPINES
HW platform: mt6737t
HW Chip: MT6737T
HW Modem: MT6737T
Security patch level: 2017-08-01
Codename: grandppltedx
Resetting FRP lock..
FRP lock is successfully reseted!
Goto "Menu->Settings->Backup and reset" and make "Factory data reset"
Performed by 1.1.4 Software version.

Last edited by Octopus box; 02-17-2018 at 12:10.
  Reply With Quote
The Following User Says Thank You to jong2 For This Useful Post:
Old 02-17-2018, 08:12   #221 (permalink)
Freak Poster
 
Join Date: Jul 2009
Posts: 116
Member: 1079917
Status: Offline
Sonork: 100.1663316
Thanks Meter: 49
Thumbs up Samsung SM-G610F FRP Unlock Successfully Done



INFO : 2/17/2018 12:18:31 PM > Welcome to Octoplus FRP Tool v.1.1.4
INFO : 2/17/2018 12:19:01 PM > Platform: SAMSUNG
INFO : 2/17/2018 12:19:01 PM > Selected model: SM-G610F
INFO : 2/17/2018 12:19:01 PM > Searching for UART interface..
INFO : 2/17/2018 12:19:01 PM > COM5
WARN : 2/17/2018 12:19:01 PM > Connect Samsung Micro UART cable(with 525K resistor), press and hold "Vol-" + "Power" buttons for 15-20 seconds
INFO : 2/17/2018 12:19:01 PM > Searching for device. Please wait...
INFO : 2/17/2018 12:19:06 PM > Phone found.
INFO : 2/17/2018 12:19:06 PM > Rebooting phone in Upload Mode...
INFO : 2/17/2018 12:19:07 PM > OK
WARN : 2/17/2018 12:19:14 PM > Please connect phone to USB cable..
INFO : 2/17/2018 12:19:14 PM > Searching for a phone. Please wait...
INFO : 2/17/2018 12:19:19 PM > OK
INFO : 2/17/2018 12:19:19 PM > Reading data...
INFO : 2/17/2018 12:19:25 PM > Checking operation...
INFO : 2/17/2018 12:19:27 PM > OK
INFO : 2/17/2018 12:19:27 PM > Searching for UART interface..
INFO : 2/17/2018 12:19:27 PM > COM5
WARN : 2/17/2018 12:19:27 PM > Connect Samsung Micro UART cable(with 525K resistor), press and hold "Vol-" + "Power" buttons for 15-20 seconds
INFO : 2/17/2018 12:19:27 PM > Searching for device. Please wait...
INFO : 2/17/2018 12:20:15 PM > Phone found.
INFO : 2/17/2018 12:20:15 PM > Resetting FRP lock (1/4 attempt)..
SUCC : 2/17/2018 12:21:21 PM > success
WARN : 2/17/2018 12:21:22 PM > FRP lock is successfully reseted!
INFO : 2/17/2018 12:21:22 PM > Performed by 1.1.4 Software version.
INFO : 2/17/2018 12:21:22 PM >

Last edited by Octopus box; 02-17-2018 at 12:14.
  Reply With Quote
The Following User Says Thank You to rasel rana For This Useful Post:
Old 02-17-2018, 11:53   #222 (permalink)
Freak Poster
 
ajmobilesshop's Avatar
 
Join Date: Jul 2016
Age: 29
Posts: 202
Member: 2602390
Status: Offline
Thanks Meter: 106
Thumbs up 🐙 Reset FRP UART (UFS Chips) SM-G930F 6.0 OCTOPLUS GOOD Working

Reset FRP UART (UFS Chips) OCT GOOD Working

SM-G930F 6.0



AJmobilesshop

Last edited by Octopus box; 02-17-2018 at 12:25.
  Reply With Quote
The Following User Says Thank You to ajmobilesshop For This Useful Post:
Old 02-18-2018, 07:13   #223 (permalink)
No Life Poster
 
UzUnlocker's Avatar
 
Join Date: Apr 2013
Location: Uzbekistan / Bukhara
Posts: 702
Member: 1912005
Status: Offline
Sonork: 100.1658592
Thanks Meter: 621
Huawei MYA-L22 FRP Reset Done One Click !!!!! PERFECT !!!!

Huawei MYA-L22 FRP Reset Done One Click !!!!! PERFECT !!!!




Last edited by Octopus box; 02-18-2018 at 14:06.
  Reply With Quote
The Following User Says Thank You to UzUnlocker For This Useful Post:
Old 02-18-2018, 13:58   #224 (permalink)
No Life Poster
 
pintu_das's Avatar
 
Join Date: Jan 2015
Location: Narsingdi, Dhaka, Bangladesh
Age: 28
Posts: 2,207
Member: 2325851
Status: Offline
Sonork: 100.1680491
Thanks Meter: 2,362
Donate money to this user
Huawei Y3 (2017) CRO-U00 FRP lock is successfully reseted!

Huawei Y3 (2017) CRO-U00 FRP lock is successfully reseted!



Please, power phone OFF and connect USB cable.







Welcome to Octoplus FRP Tool v.1.1.4
Platform: HUAWEI
Selected model: CRO-U00
Please, power phone OFF and connect USB cable.
Searching for a phone. Please wait...
Found phone on COM66
Detecting Chip Version...
HW Chip: MT6580: 6580.0000
HW Version: 8A00.CA00.0000.0000
Connecting...
Brom Version: FF
BootLoader Version: 01
Searching Download Agent...
Selected DA: MTK_AllInOne_DA_Octoplus_Huawei_v.1, n.0
Sending Download Agent...
DA sent successfully
Initializing DA...
Synchronizing with DA...
NAND Flash: not installed
eMMC Flash: .90014A48.38473461.32D43394.E5998429
eMMC Flash: Hynix: H8G4a2
DA ver: 4.2.94
Initializing Memory Flash..
Initialization successfully completed
Sending loaders...
Loader send successfuly.
Reading Flash Info...
EMMC rpmb size: 4 Mb
EMMC boot1 size: 4 Mb
EMMC boot2 size: 4 Mb
EMMC gp1 size: 0 Mb
EMMC gp2 size: 0 Mb
EMMC gp3 size: 0 Mb
EMMC gp4 size: 0 Mb
EMMC user area size: 7456 Mb
Internal RAM size: 128 Kb
External RAM size: 1024 Mb
Reading partition...
Reading info...
Brand: HUAWEI
Model: CRO-U00
Device: HWCRO-U6580M
Platform: mt6580
Android version: 6.0
Display ID: Cairo-U00C636B125
Searching for signatures...
Resetting FRP lock..
FRP lock is successfully reseted!
Backup saved as HUAWEI_CRO-U00_18-02-2018_18-46-49.dump file
Performed by 1.1.4 Software version.





Thanks Octoplus team

Last edited by Octopus box; 02-18-2018 at 14:07.
  Reply With Quote
The Following User Says Thank You to pintu_das For This Useful Post:
Old 02-19-2018, 03:01   #225 (permalink)
No Life Poster
 
rasgula's Avatar
 
Join Date: Feb 2005
Location: Canada
Posts: 1,278
Member: 119464
Status: Offline
Thanks Meter: 288
Moto XT1563 FRP Reset successfully

Moto XT1563 FRP Reset successfully:

Code:
Welcome to Octoplus FRP Tool v.1.1.4
Platform: MOTOROLA
Selected model: XT1563
Put the phone into Factory Mode: 
1. Power phone OFF; 
2. Press and hold "Vol-" + "Power" buttons; 
3. Select Factory Mode, then confirm your selection; 
4. Wait until the phone Power ON; 
5. Connect USB cable.
Searching for a phone. Please wait...
Phone found.
Reading info...
Phone model: FAAAANVZ
Firmware released date: Feb 14 2016
Firmware released time: 21:25:47
Firmware compiled date: Nov 22 2015
Firmware compiled time: 23:00:00
SW version: MPSS.DPM.2.0.2.c1.8-00044-M8936FAAAANUZM-1
Enabling "USB Debugging" mode...
Put the phone in Factory Mode:
1. Disconnect USB cable;
2. Power OFF the phone;
3. Press "Vol-" and "Power" buttons;
4. Select Factory Mode then confirm your selection;
5. Wait until phone is power ON and connect USB Cable;
6. Install necesarry drivers then press "OK" button
Please, press "OK" button on the phone to allow USB debugging..
Searching for a phone (waiting for ADB device)...
Phone found.
Reading info...
Phone model: motorola XT1563
SW version: MPDS24.107-52-3-5
Date: Mon Jan 16 02:39:07 CST 2017
Android version: 6.0.1
Baseband M8936_2020632.44.03.21.57R LUX_TELUS_CUST
Detected phone model: XT1563
Resetting FRP lock..
FRP lock is successfully reseted!
Performed by 1.1.4 Software version.

Last edited by Octopus box; 02-19-2018 at 13:12.
  Reply With Quote
The Following User Says Thank You to rasgula For This Useful Post:
Reply

Bookmarks

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On


 



All times are GMT +1. The time now is 06:35.



Powered by Searchlight © 2024 Axivo Inc.
vBulletin Optimisation provided by vB Optimise (Pro) - vBulletin Mods & Addons Copyright © 2024 DragonByte Technologies Ltd.
- GSM Hosting Ltd. - 1999-2023 -
Page generated in 0.33414 seconds with 9 queries

SEO by vBSEO