GSM Shop GSM Shop
GSM-Forum  

Welcome to the GSM-Forum forums.

You are currently viewing our boards as a guest which gives you limited access to view most discussions and access our other features.
Only registered members may post questions, contact other members or search our database of over 8 million posts.

Registration is fast, simple and absolutely free so please - Click to REGISTER!

If you have any problems with the registration process or your account login, please contact contact us .

Go Back   GSM-Forum > Product Support Sections > Hard/Software Products (official support) > Octopus/Octoplus > Octoplus FRP Tool

Reply
 
LinkBack Thread Tools Display Modes
Old 11-26-2018, 15:58   #2356 (permalink)
No Life Poster
 
louka's Avatar
 
Join Date: Nov 2005
Posts: 947
Member: 198016
Status: Offline
Sonork: 100.1602918
Thanks Meter: 408
Thumbs up Huawei Honor 7A Pro (2018) Reset FRP successfully done


Platform: HUAWEI
Selected model: AUM-L29
Put the phone in FastBoot Mode:
1. Remove SD and SIM cards from the phone
2. Power phone OFF
3. Press and hold "Vol-" and insert USB cable
4. Wait until the phone enter in FastBoot Mode
Searching for a phone. Please wait...
Detected phone model: AUM-L29
Phone SN: QDG9X18420W00903
Phone IMEI: 8672680xxxxxxxx
Connecting to server..OK
Authorizing...OK
Resetting FRP lock..
If the device didn't reboot automatically, try to reconnect USB cable or re-boot it manually.
FRP lock is successfully reseted!
Performed by 1.5.1.0 Software version.
  Reply With Quote
The Following User Says Thank You to louka For This Useful Post:
Old 11-26-2018, 17:31   #2357 (permalink)
No Life Poster
 
louka's Avatar
 
Join Date: Nov 2005
Posts: 947
Member: 198016
Status: Offline
Sonork: 100.1602918
Thanks Meter: 408
CONDOR SP-622 Reset FRP successfully done

Welcome to Octoplus FRP Tool v.1.5.1.0
Platform: CONDOR
Selected model: SP-622
Please, power phone OFF and connect USB cable.
Searching for a phone. Please wait...
Found phone on COM16
Detecting Chip Version...
HW Chip: MT6737: 0335.0000
HW Version: 8A00.CA00.0000.0000
Connecting...
Brom Version: FF
BootLoader Version: 01
Searching Download Agent...
Selected DA: MTK_AllInOne_DA_v3.3001.2018-04-25.11:32_437806, n.10
Sending Download Agent...
DA sent successfully
Initializing DA...
Synchronizing with DA...
NAND Flash: not installed
eMMC Flash: .13014E51.324A3336.43100062.01906489
eMMC Flash: Unknown: Q2J36C
DA ver: 4.2.9B
Initializing Memory Flash..
Initialization successfully completed
Sending loaders...
Loader send successfuly.
Reading Flash Info...
EMMC rpmb size: 4 Mb
EMMC boot1 size: 4 Mb
EMMC boot2 size: 4 Mb
EMMC gp1 size: 0 Mb
EMMC gp2 size: 0 Mb
EMMC gp3 size: 0 Mb
EMMC gp4 size: 0 Mb
EMMC user area size: 15028 Mb
Internal RAM size: 128 Kb
External RAM size: 2048 Mb
Reading partition...
Reading info...
Brand: Condor
Model: Plume L1
Device: SP622
Platform: mt6737m
Android version: 7.0
Display ID: SP622_V6_20171221
Searching for signatures...
Resetting FRP lock..
FRP lock is successfully reseted!
Backup saved as CONDOR_SP-622_26-11-2018_17-29-37.dump file
Performed by 1.5.1.0 Software version.
  Reply With Quote
The Following User Says Thank You to louka For This Useful Post:
Old 11-26-2018, 19:31   #2358 (permalink)
Freak Poster
 
Join Date: Jul 2009
Location: Dominican Republic
Age: 35
Posts: 197
Member: 1078865
Status: Offline
Sonork: 100.1626549
Thanks Meter: 82
Samsung SM-T337A Reset FRP successfully done

FRP T337A

FRP G935V 8.0 BIT 8 DONE


Last edited by Octopus box; 11-26-2018 at 20:00.
  Reply With Quote
The Following User Says Thank You to lizandropc For This Useful Post:
Old 11-26-2018, 23:03   #2359 (permalink)
No Life Poster
 
Join Date: Jan 2006
Location: PORTUGAL
Posts: 766
Member: 216446
Status: Offline
Thanks Meter: 220
Samsung SM-J320FN FRP remove success in Download Mode

Welcome to Octoplus FRP Tool v.1.5.1.0
Platform: SAMSUNG
Selected model: SM-J320FN
Reset FRP/ Reactivation lock operation for SM-J320FN will delete all user data on the phone (contacts, pictures and others)!

NOTE: You can reset FRP/ Reactivation without losing user data via Factory Reset FRP/ Reactivation service.
Connecting to server...
Connecting to server...Ok!
Checking resource files...
Resource files already downloaded.
Please put the phone into Download Mode and connect USB cable.
To put SM-J320FN into Download Mode, You have to perform the following steps:
1. Reconnect the battery.
2. Press and hold "Volume-" + "Home" + "Power ON" keys.
3. When phone turns on, press "Volume+" key.
Waiting for phone...
Advanced mode!
Firmware write started.
Writing Custom section...
Custom section has been written successfully.
Firmware writing successfully completed.
FRP lock is successfully reseted!
Wait 3-4 min then goto "Menu -> Settings -> Backup and reset" and make "Factory data reset"
Performed by 1.5.1.0 Software version.

Last edited by Octopus box; 11-27-2018 at 05:19.
  Reply With Quote
The Following User Says Thank You to jseyedanas For This Useful Post:
Old 11-27-2018, 05:54   #2360 (permalink)
No Life Poster
 
djmurod86's Avatar
 
Join Date: Feb 2007
Location: Inside
Posts: 4,133
Member: 455852
Status: Offline
Sonork: 100.1596308
Thanks Meter: 1,992
Donate money to this user
Thumbs up Tele2 Mini 1.1 Reset FRP successfully done

Platform: __GENERAL RESET FRP METHODS
Selected model: MTK GENERAL
Please, power phone OFF and connect USB cable.
Searching for a phone. Please wait...
Found phone on COM44
Detecting Chip Version...
HW Chip: MT6580: 6580.0000
HW Version: 8A00.CA00.0000.0000
Connecting...
Brom Version: FF
BootLoader Version: 01
Searching Download Agent...
Selected DA: MTK_AllInOne_DA_v3.3001.2018-04-25.11:32_437806, n.11
Sending Download Agent...
DA sent successfully
Initializing DA...
Synchronizing with DA...
NAND Flash: not installed
eMMC Flash: .8801034E.43617264.2026A9FF.4560537B
eMMC Flash: Foresee: NCard
DA ver: 4.2.9C
Initializing Memory Flash..
Initialization successfully completed
Sending loaders...
Loader send successfuly.
Reading Flash Info...
EMMC rpmb size: 0 Mb
EMMC boot1 size: 4 Mb
EMMC boot2 size: 4 Mb
EMMC gp1 size: 0 Mb
EMMC gp2 size: 0 Mb
EMMC gp3 size: 0 Mb
EMMC gp4 size: 0 Mb
EMMC user area size: 3740 Mb
Internal RAM size: 128 Kb
External RAM size: 512 Mb
Reading partition...
Reading info...
Brand: Tele2_Mini_1.1
Model: Tele2_Mini_1.1
Device: Tele2_Mini_1.1
Platform: mt6580
Android version: 6.0
Display ID: Tele2_Mini_1.1_V01.01.20161117
Searching for signatures...
Resetting FRP lock..
FRP lock is successfully reseted!
Backup saved as Tele2_Mini_1.1_Tele2_Mini_1.1_27-11-2018_09-52-47.dump file
Performed by 1.5.1.0 Software version.
  Reply With Quote
The Following User Says Thank You to djmurod86 For This Useful Post:
Old 11-27-2018, 07:02   #2361 (permalink)
No Life Poster
 
djmurod86's Avatar
 
Join Date: Feb 2007
Location: Inside
Posts: 4,133
Member: 455852
Status: Offline
Sonork: 100.1596308
Thanks Meter: 1,992
Donate money to this user
Thumbs up J320H Reset FRP successfully done

Welcome to Octoplus FRP Tool v.1.5.1.0
Platform: SAMSUNG
Selected model: SM-J320H
Reset FRP/ Reactivation lock operation for SM-J320H will delete all user data on the phone (contacts, pictures and others)!

NOTE: You can reset FRP/ Reactivation without losing user data via Factory Reset FRP/ Reactivation service.
Connecting to server...
Connecting to server...Ok!
Checking resource files...
Resource files already downloaded.
Please put the phone into Download Mode and connect USB cable.
To put SM-J320H into Download Mode, You have to perform the following steps:
1. Reconnect the battery.
2. Press and hold "Volume-" + "Home" + "Power ON" keys.
3. When phone turns on, press "Volume+" key.
Waiting for phone...
Advanced mode!
Firmware write started.
Writing Custom section...
Custom section has been written successfully.
Firmware writing successfully completed.
FRP lock is successfully reseted!
Wait 3-4 min then goto "Menu -> Settings -> Backup and reset" and make "Factory data reset"
Performed by 1.5.1.0 Software version.
  Reply With Quote
The Following User Says Thank You to djmurod86 For This Useful Post:
Old 11-27-2018, 08:24   #2362 (permalink)
No Life Poster
 
localizator's Avatar
 
Join Date: Mar 2016
Location: Ukraine
Posts: 1,024
Member: 2550141
Status: Offline
Thanks Meter: 1,115
Donate money to this user
ZTE Blade L5 T520 [P172A40] Reset FRP Done

ZTE Blade L5 T520 [P172A40] Reset FRP Done

Read Info




Code:
Welcome to Octoplus FRP Tool v.1.5.1.0
Platform: __GENERAL RESET FRP METHODS
Selected model: MTK GENERAL
Please, power phone OFF and connect USB cable.
Searching for a phone. Please wait...
Found phone on COM22
Detecting Chip Version...
HW Chip: MT6572: 6572.0000
HW Version: 8A00.CA01.0000.0000
Connecting...
Brom Version: FF
BootLoader Version: 01
Searching Download Agent...
Selected DA: MTK_AllInOne_DA_v3.3001.2018-04-25.11:32_437806, n.0
Sending Download Agent...
DA sent successfully
Initializing DA...
Synchronizing with DA...
NAND Flash: not installed
eMMC Flash: .15010046.4E58324D.4201488B.D867A399
eMMC Flash: Samsung: FNX2MB
DA ver: 4.2.88
Initializing Memory Flash..
Initialization successfully completed
Sending loaders...
Loader send successfuly.
Reading Flash Info...
EMMC rpmb size: 0 Mb
EMMC boot1 size: 4 Mb
EMMC boot2 size: 4 Mb
EMMC gp1 size: 0 Mb
EMMC gp2 size: 0 Mb
EMMC gp3 size: 0 Mb
EMMC gp4 size: 0 Mb
EMMC user area size: 7456 Mb
Internal RAM size: 128 Kb
External RAM size: 1024 Mb
Reading partition...
Reading partition...
Reading info...
Brand: ZTE
Model: ZTE T520
Device: P172A40
Platform: mt6572
Android version: 5.1
Display ID: DIS_RU_QB158D_P172A40V1.0.3
Backup saved as ZTE_ZTE T520_27-11-2018_09-06-59.dump file
Performed by 1.5.1.0 Software version.



Reset FRP




Code:
Platform: __GENERAL RESET FRP METHODS
Selected model: MTK GENERAL
Please, power phone OFF and connect USB cable.
Searching for a phone. Please wait...
Found phone on COM22
Detecting Chip Version...
HW Chip: MT6572: 6572.0000
HW Version: 8A00.CA01.0000.0000
Connecting...
Brom Version: FF
BootLoader Version: 01
Searching Download Agent...
Selected DA: MTK_AllInOne_DA_v3.3001.2018-04-25.11:32_437806, n.0
Sending Download Agent...
DA sent successfully
Initializing DA...
Synchronizing with DA...
NAND Flash: not installed
eMMC Flash: .15010046.4E58324D.4201488B.D867A399
eMMC Flash: Samsung: FNX2MB
DA ver: 4.2.88
Initializing Memory Flash..
Initialization successfully completed
Sending loaders...
Loader send successfuly.
Reading Flash Info...
EMMC rpmb size: 0 Mb
EMMC boot1 size: 4 Mb
EMMC boot2 size: 4 Mb
EMMC gp1 size: 0 Mb
EMMC gp2 size: 0 Mb
EMMC gp3 size: 0 Mb
EMMC gp4 size: 0 Mb
EMMC user area size: 7456 Mb
Internal RAM size: 128 Kb
External RAM size: 1024 Mb
Reading partition...
Reading partition...
Reading info...
Brand: ZTE
Model: ZTE T520
Device: P172A40
Platform: mt6572
Android version: 5.1
Display ID: DIS_RU_QB158D_P172A40V1.0.3
Searching for signatures...
Resetting FRP lock..
FRP lock is successfully reseted!
Backup saved as ZTE_ZTE T520_27-11-2018_09-16-57.dump file
Performed by 1.5.1.0 Software version.

  Reply With Quote
The Following User Says Thank You to localizator For This Useful Post:
Old 11-27-2018, 09:24   #2363 (permalink)
No Life Poster
 
localizator's Avatar
 
Join Date: Mar 2016
Location: Ukraine
Posts: 1,024
Member: 2550141
Status: Offline
Thanks Meter: 1,115
Donate money to this user
Samsung SM-J510FN Reset FRP Done

Samsung SM-J510FN Reset FRP Done





Code:
Platform: SAMSUNG
Selected model: SM-J510FN
Reset FRP/ Reactivation lock operation for SM-J510FN will delete all user data on the phone (contacts, pictures and others)! 

NOTE: You can reset FRP/ Reactivation without losing user data via Factory Reset FRP/ Reactivation service.
Connecting to server...
Connecting to server...Ok!
Checking resource files...
Resource files already downloaded.
Please put the phone into Download Mode and connect USB cable.
To put SM-J510FN into Download Mode, You have to perform the following steps:
1. Reconnect the battery.
2. Press and hold "Volume-" + "Home" + "Power ON" keys.
3. When phone turns on, press "Volume+" key.
Waiting for phone...
Advanced mode!
Firmware write started.
Writing Custom section...
Custom section has been written successfully.
Firmware writing successfully completed.
FRP lock is successfully reseted!
Wait 3-4 min then goto "Menu -> Settings -> Backup and reset" and make "Factory data reset"
Performed by 1.5.1.0 Software version.

  Reply With Quote
Old 11-27-2018, 11:01   #2364 (permalink)
No Life Poster
 
genci titi 2002's Avatar
 
Join Date: Oct 2005
Location: TITI 2002 SERVIS CELULAR PG/AL
Posts: 4,174
Member: 193804
Status: Offline
Sonork: 100.1684818
Thanks Meter: 1,685
LG M250N FRP lock is successfully reseted!

Platform: LG
Selected model: M250N
Searching for a phone. Please wait...
Found phone on COM186
Reading info...
Detected phone model: LG-M250n
Mode: Emergency
Initializing..
SW version: LGM250nAT-00-V10g-222-01-JUN-08-2018+0
Android version: 7.0
Platform: mt6750
Reset FRP operation for M250N will delete all user data on the phone (contacts, pictures and others)!
Do You want to continue?
Reading partition...
Detecting writing method...
Trying to repeat..
Trying third method...
Resetting FRP lock..
Writing loader...
Writing userdata...
Formating encrypt section
Restoring loader...
Perform factory reset to complete operation!
FRP lock is successfully reseted!
Performed by 1.5.1.0 Software version.

Last edited by Octopus box; 11-27-2018 at 13:59.
  Reply With Quote
The Following User Says Thank You to genci titi 2002 For This Useful Post:
Old 11-27-2018, 12:04   #2365 (permalink)
No Life Poster
 
Join Date: Jan 2010
Location: South africa
Age: 35
Posts: 2,672
Member: 1197620
Status: Offline
Sonork: 100.1602278
Thanks Meter: 646
Thumbs up 🐙 Doopro P2 FRP unlock successfully done

JUST AM SELECT A DOOPRO P1 AND MY JOB DONE



Welcome to Octoplus FRP Tool v.1.5.0.0
Platform: DOOPRO
Selected model: P1
Please, power phone OFF and connect USB cable.
Searching for a phone. Please wait...
Found phone on COM262
Detecting Chip Version...
HW Chip: MT6580: 6580.0000
HW Version: 8A00.CA00.0000.0000
Connecting...
Brom Version: FF
BootLoader Version: 01
Searching Download Agent...
Selected DA: MTK_AllInOne_DA_v3.3001.2018-04-25.11:32_437806, n.11
Sending Download Agent...
DA sent successfully
Initializing DA...
Synchronizing with DA...
NAND Flash: not installed
eMMC Flash: .15010038.57504433.52008DBB.F071A3E9
eMMC Flash: Samsung: 8WPD3R
DA ver: 4.2.9C
Initializing Memory Flash..
Initialization successfully completed
Sending loaders...
Loader send successfuly.
Reading Flash Info...
EMMC rpmb size: 0 Mb
EMMC boot1 size: 4 Mb
EMMC boot2 size: 4 Mb
EMMC gp1 size: 0 Mb
EMMC gp2 size: 0 Mb
EMMC gp3 size: 0 Mb
EMMC gp4 size: 0 Mb
EMMC user area size: 7456 Mb
Internal RAM size: 128 Kb
External RAM size: 1024 Mb
Reading partition...
Reading info...
Brand: doopro
Model: P2
Device: br6580_weg_emmc_m
Platform: mt6580
Android version: 6.0
Display ID: M8_D5004MQ_P2_V1.0.2
Backup saved as DOOPRO_P1_27-11-2018_12-55-20.dump file
Performed by 1.5.0.0 Software version.

Platform: DOOPRO
Selected model: P1
Please, power phone OFF and connect USB cable.
Searching for a phone. Please wait...
Found phone on COM262
Detecting Chip Version...
HW Chip: MT6580: 6580.0000
HW Version: 8A00.CA00.0000.0000
Connecting...
Brom Version: FF
BootLoader Version: 01
Searching Download Agent...
Selected DA: MTK_AllInOne_DA_v3.3001.2018-04-25.11:32_437806, n.11
Sending Download Agent...
DA sent successfully
Initializing DA...
Synchronizing with DA...
NAND Flash: not installed
eMMC Flash: .15010038.57504433.52008DBB.F071A3E9
eMMC Flash: Samsung: 8WPD3R
DA ver: 4.2.9C
Initializing Memory Flash..
Initialization successfully completed
Sending loaders...
Loader send successfuly.
Reading Flash Info...
EMMC rpmb size: 0 Mb
EMMC boot1 size: 4 Mb
EMMC boot2 size: 4 Mb
EMMC gp1 size: 0 Mb
EMMC gp2 size: 0 Mb
EMMC gp3 size: 0 Mb
EMMC gp4 size: 0 Mb
EMMC user area size: 7456 Mb
Internal RAM size: 128 Kb
External RAM size: 1024 Mb
Reading partition...
Reading info...
Brand: doopro
Model: P2
Device: br6580_weg_emmc_m
Platform: mt6580
Android version: 6.0
Display ID: M8_D5004MQ_P2_V1.0.2
Searching for signatures...
Resetting FRP lock..
FRP lock is successfully reseted!
Backup saved as DOOPRO_P1_27-11-2018_12-55-37.dump file
Performed by 1.5.0.0 Software version.

Last edited by Octopus box; 11-27-2018 at 14:04.
  Reply With Quote
The Following User Says Thank You to saleem5001 For This Useful Post:
Old 11-27-2018, 13:37   #2366 (permalink)
No Life Poster
 
djmurod86's Avatar
 
Join Date: Feb 2007
Location: Inside
Posts: 4,133
Member: 455852
Status: Offline
Sonork: 100.1596308
Thanks Meter: 1,992
Donate money to this user
Thumbs up REDMI NOTE 4 FRP rest successfully done

Platform: XIAOMI
Selected model: REDMI NOTE 4X
Put the phone into EDL mode:
1. Attach testpoint as shown in Help manual;
2. Connect USB cable;
3. Release testpoint after 3-5 seconds.
Searching for a phone. Please wait...
Found phone on COM10
Mode: Qualcomm 9008
Connecting...
Reading info...
QC HW ID: 000460E100000000
QC CPU: Snapdragon 625 MSM8953
Searching loader...
Sending loaders...
Loader send successfuly.
Reconnecting...
Checking request..
Reading partition...
Reading info...
Brand: xiaomi
Model: Redmi Note 4
Device: mido
Platform: msm8953
Android version: 7.0
Display ID: AL1512-mido-build-20180309002948
Searching for signatures...
Resetting FRP lock..
FRP lock is successfully reseted!
Rebooting phone
Backup saved as XIAOMI_REDMI NOTE 4X_27-11-2018_17-33-48.dump file
Performed by 1.5.1.0 Software version.
  Reply With Quote
The Following User Says Thank You to djmurod86 For This Useful Post:
Old 11-27-2018, 13:47   #2367 (permalink)
No Life Poster
 
Join Date: Feb 2012
Posts: 762
Member: 1718440
Status: Offline
Thanks Meter: 620
Thumbs up 🐙 MINT M3CR FRP Reset Done with Octoplus FRP Tool

MINT M3CR FRP Reset Done by selecting M5CR






Welcome to Octoplus FRP Tool v.1.5.1.0
Platform: MINT
Selected model: M5CR
Please, power phone OFF, press and hold "Vol+" button and connect USB cable.
Searching for a phone. Please wait...
Found phone on COM18
Connecting...
Mobile Status: SPRD3
Sending preloader...
Mobile Status: Spreadtrum Boot Block version 1.1
Sending mainloader...
Reading info...
Brand: Mint
Model: M3CR
Device: Mint_Fox
Platform: sc8830
Android version: 6.0
Display ID: 7731C_C22h_ruiou_3501_s88_170510
Searching for signatures...
Resetting FRP lock..
FRP lock is successfully reseted!
Backup saved as MINT_M5CR_27-11-2018_14-45-26.dump file
Performed by 1.5.1.0 Software version.

Last edited by Octopus box; 11-27-2018 at 14:08.
  Reply With Quote
The Following User Says Thank You to Bell666 For This Useful Post:
Old 11-27-2018, 13:51   #2368 (permalink)
Freak Poster
 
khorsed_pabna's Avatar
 
Join Date: Oct 2013
Location: Bangladesh
Posts: 349
Member: 2049143
Status: Offline
Sonork: not use
Thanks Meter: 270
Thumbs up 🐙 WALTON Primo F6 Reset FRP successfully done

Welcome to Octoplus FRP Tool v.1.5.1.0
Platform: __GENERAL RESET FRP METHODS
Selected model: MTK GENERAL
Please, power phone OFF and connect USB cable.
Searching for a phone. Please wait...
Found phone on COM8
Detecting Chip Version...
HW Chip: MT6580: 6580.0000
HW Version: 8A00.CA00.0000.0000
Connecting...
Brom Version: FF
BootLoader Version: 01
Searching Download Agent...
Selected DA: MTK_AllInOne_DA_v3.3001.2018-04-25.11:32_437806, n.11
Sending Download Agent...
DA sent successfully
Initializing DA...
Synchronizing with DA...
NAND Flash: not installed
eMMC Flash: .15010051.3732534D.42003A36.574D7273
eMMC Flash: Samsung: Q72SMB
DA ver: 4.2.9C
Initializing Memory Flash..
Initialization successfully completed
Sending loaders...
Loader send successfuly.
Reading Flash Info...
EMMC rpmb size: 0 Mb
EMMC boot1 size: 4 Mb
EMMC boot2 size: 4 Mb
EMMC gp1 size: 0 Mb
EMMC gp2 size: 0 Mb
EMMC gp3 size: 0 Mb
EMMC gp4 size: 0 Mb
EMMC user area size: 7456 Mb
Internal RAM size: 128 Kb
External RAM size: 1024 Mb
Reading partition...
Reading info...
Brand: Walton
Model: Primo F6
Device: Primo_F6
Platform: mt6580
Android version: 5.1
Display ID: Primo_F6_S006_02072015
Searching for signatures...
Resetting FRP lock..
FRP lock is successfully reseted!
Backup saved as Walton_Primo F6_27-11-2018_18-49-01.dump file
Performed by 1.5.1.0 Software version.

Last edited by Octopus box; 11-27-2018 at 14:07.
  Reply With Quote
The Following User Says Thank You to khorsed_pabna For This Useful Post:
Old 11-27-2018, 14:35   #2369 (permalink)
Banned
 
Join Date: May 2013
Location: Hacked by Hackflax on tiktok
Posts: 1,548
Member: 1941705
Status: Offline
Thanks Meter: 1,248
Donate money to this user
Thumbs up 🐙 Xiaomi Redmi S2 FRP Reset Done with Octoplus FRP Tool

Xiaomi Redmi S2 FRP Reset Done with Octoplus FRP Tool
Quote:
Platform: XIAOMI
Selected model: REDMI S2
This operation is in Test Mode and at your own risk. Do You want to continue the operation?
Put the phone into EDL mode:
1. Attach testpoint as shown in Help manual;
2. Connect USB cable;
3. Release testpoint after 3-5 seconds.
Searching for a phone. Please wait...
Found phone on COM96
Mode: Qualcomm 9008
Connecting...
Reading info...
QC HW ID: 000460E100000000
QC CPU: Snapdragon 625 MSM8953
Searching loader...
Sending loaders...
Loader send successfuly.
Reconnecting...
Checking request..
Reading partition...
Reading info...
Resetting Mi Account...
Reading MI part...
Writing MI part...
Rebooting phone
Backup saved as XIAOMI_REDMI S2_27-11-2018_15-33-12.dump file
Mi Account is successfully reseted!
Performed by 1.5.1.0 Software version.

Last edited by Octopus box; 11-27-2018 at 15:02.
  Reply With Quote
The Following User Says Thank You to Xaker2012 For This Useful Post:
Old 11-27-2018, 14:50   #2370 (permalink)
Freak Poster
 
Join Date: Jun 2013
Location: South Africa
Posts: 155
Member: 1961231
Status: Offline
Thanks Meter: 36
Hisense F17 frp done by one click with fastest team frp tool

Hisense F17 frp done by one click with fastest team frp tool

Platform: HISENSE
Selected model: F17
Please, power phone OFF and connect USB cable.
Searching for a phone. Please wait...
Found phone on COM19
Detecting Chip Version...
HW Chip: MT6580: 6580.0000
HW Version: 8A00.CA00.0000.0000
Connecting...
Brom Version: 05
BootLoader Version: FE
Sending auth...
Searching Download Agent...
Selected DA: MTK_AllInOne_DA_byOctoplus_Hisense_v.1, n.1
Sending Download Agent...
DA sent successfully
Initializing DA...
Synchronizing with DA...
NAND Flash: not installed
eMMC Flash: .15010046.4536324D.4203DB05.06722573
eMMC Flash: Samsung: FE62MB
DA ver: 4.2.9C
Initializing Memory Flash..
Sending BootLoader Info...
Initialization successfully completed
Sending loaders...
Loader send successfuly.
Reading Flash Info...
EMMC rpmb size: 4 Mb
EMMC boot1 size: 4 Mb
EMMC boot2 size: 4 Mb
EMMC gp1 size: 0 Mb
EMMC gp2 size: 0 Mb
EMMC gp3 size: 0 Mb
EMMC gp4 size: 0 Mb
EMMC user area size: 14910 Mb
Internal RAM size: 128 Kb
External RAM size: 1024 Mb
Reading partition...
Reading info...
Brand: Hisense
Model: Hisense F17
Device: HS6580MT
Platform: mt6580
Android version: 7.0
Display ID: Hisense_F17_00_S03_20180210
Searching for signatures...
Resetting FRP lock..
FRP lock is successfully reseted!
Backup saved as HISENSE_F17_27-11-2018_15-34-27.dump file
Performed by 1.5.0.0 Software version.

Last edited by Octopus box; 11-27-2018 at 14:59.
  Reply With Quote
The Following User Says Thank You to eyelaaview For This Useful Post:
Reply

Bookmarks

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On


 



All times are GMT +1. The time now is 01:38.



Powered by Searchlight © 2024 Axivo Inc.
vBulletin Optimisation provided by vB Optimise (Pro) - vBulletin Mods & Addons Copyright © 2024 DragonByte Technologies Ltd.
- GSM Hosting Ltd. - 1999-2023 -
Page generated in 0.24821 seconds with 9 queries

SEO by vBSEO