🐙 Post here success Reset FRP story with Octoplus FRP Tool

[marcin7904]

Samsung SM-A520F FRP remove Done

[marcin7904]

Samsung SM-A520F FRP remove Done

Selected AP file: C:\Users\GSM\Desktop\COMBINATION_FAC_FA60_A520FXXU 7ARJ1_FAC7ARJ1_CL14478682_QB19993759_REV00_user_mi d_noship.tar
Platform: SAMSUNG
Selected model: SM-A520F
Please put the phone into Download Mode and connect USB cable.
To put SM-A520F into Download Mode, You have to perform the following steps:
1. Reconnect the battery.
2. Press and hold "Volume-" + "Home" + "Power ON" keys.
3. When phone turns on, press "Volume+" key.
Found phone on
Advanced mode!
Firmware write started.
Writing BOOTLOADER section...
BOOTLOADER section has been written successfully.
Writing PARAM section...
PARAM section has been written successfully.
Writing CM section...
CM section has been written successfully.
Writing NAD_FW section...
NAD_FW section has been written successfully.
Writing NAD_REFER section...
NAD_REFER section has been written successfully.
Writing BOOT section...
BOOT section has been written successfully.
Writing RECOVERY section...
RECOVERY section has been written successfully.
Writing SYSTEM section...
SYSTEM section has been written successfully.
Writing RADIO section...
RADIO section has been written successfully.
Writing CACHE section...
CACHE section has been written successfully.
Firmware writing successfully completed.
Performed by 1.5.9.0 Software version.

Platform: SAMSUNG
Selected model: SM-A520F
Searching for a phone (waiting for ADB device)...
Reading info...
Detected phone model: SM-A520F
Firmware compiled date: Mon Oct 1 08:49:01 KST 2018
PDA version: FA60_A520FXXU7ARJ1
CSC version: unknown
SW version: A520FXXU7ARJ1
Phone SN: R58JC47KHYV
Android version: 6.0.1 (MMB29K)
Sales code: unknown
Country: unknown
HW platform: exynos5
HW Chip: exynos7880
HW Modem: SHANNON325
Security patch level: 2016-12-01
Codename: a5y17ltexx
Resetting FRP lock..
FRP lock is successfully reseted!
Goto "Menu->Settings->Backup and reset" and make "Factory data reset"
Performed by 1.5.9.0 Software version.

[Surtax]

Welcome to Octoplus FRP Tool v.1.5.3.3
Platform: HUAWEI
Selected model: PRA-LX1
Put the phone in FastBoot Mode:
1. Remove SD and SIM cards from the phone
2. Power phone OFF
3. Press and hold "Vol-" and insert USB cable
4. Wait until the phone enter in FastBoot Mode
Searching for a phone. Please wait...
Detected phone model: PRA-LX1
Phone SN: 8NH7N18613008446
Phone IMEI: 864463036045768
Phone IMEI2: 864463036063373
SW version: PRA-LX1 8.0.0.360(C10)
Connecting to server..OK
Authorizing...OK
Resetting FRP lock..
If the device didn't reboot automatically, try to reconnect USB cable or re-boot it manually.
FRP lock is successfully reseted!
Performed by 1.5.3.3 Software version.

Thanks Octopus Team!!!!

[djmurod86]

Welcome to Octoplus FRP Tool v.1.5.9.0
Platform: XIAOMI
Selected model: REDMI 4 PREMIUM EDITION
This operation is in Test Mode and at your own risk. Do You want to continue the operation?
Put the phone into EDL mode:
1. Attach testpoint as shown in Help manual;
2. Connect USB cable;
3. Release testpoint after 3-5 seconds.
Searching for a phone. Please wait...
Found phone on COM270
Mode: Qualcomm 9008
Connecting...
Reading info...
QC HW ID: 000460E100000000
QC CPU: Snapdragon 625 MSM8953
Searching loader...
Sending loaders...
Loader send successfuly.
Reconnecting...
Checking request..
Reading partition...
Reading info...
Brand: Xiaomi
Model: Redmi 4
Device: markw
Platform: msm8953
Android version: 6.0.1
Display ID: MMB29M
Resetting Mi Account...
Reading MI part...
Writing MI part...
Rebooting phone
Backup saved as XIAOMI_REDMI 4 PREMIUM EDITION_19-01-2019_10-15-14.dump file
Mi Account is successfully reseted!
Performed by 1.5.9.0 Software version.

[pasha marks]

Platform: LG
Selected model: K220
Searching for a phone. Please wait...
Found phone on COM4
Reading info...
Detected phone model: LG-K220ds
Mode: Emergency
Initializing..
SW version: LGK220dsAT-00-V10f-AME-XX-JAN-02-2018+0
Android version: 6.0.1
Platform: mt6735
Reading partition...
Resetting FRP lock..
FRP lock is successfully reseted!
Performed by 1.5.9.0 Software version.

[jehadabodan]

Thanks Octoplus FRP

******Bat i chose Other Model ZS571KL (A002)******


Welcome to Octoplus FRP Tool v.1.5.9.0
Platform: ASUS
Selected model: ZS571KL (A002)
Put the phone into Fastboot Mode:
1. Power phone OFF;
2. Press and hold "Vol+" button and connect USB cable.
Searching for a phone. Please wait...
Phone found.
Enabling "USB Debugging" mode...
Rebooting to Normal mode...
Searching for a phone (waiting for ADB device)...
Phone found.
Reading info...
Phone model: asus ASUS_Z016D
SW version: NRD90M
Date: 一 9月 11 20:46:41 CST 2017
Android version: 7.0
Baseband 201010701_19.0.0_M11_170614
Resetting FRP lock..
FRP lock is successfully reseted!
Performed by 1.5.9.0 Software version.

[louka]

INFO : 18/01/2019 22:23:28 > Welcome to Octoplus FRP Tool v.1.5.8.0
INFO : 18/01/2019 22:28:02 > Platform: HUAWEI
INFO : 18/01/2019 22:28:02 > Selected model: VNS-L31
INFO : 18/01/2019 22:28:02 > Put the phone in FastBoot Mode:
INFO : 18/01/2019 22:28:02 > 1. Remove SD and SIM cards from the phone
INFO : 18/01/2019 22:28:02 > 2. Power phone OFF
INFO : 18/01/2019 22:28:02 > 3. Press and hold "Vol-" and insert USB cable
INFO : 18/01/2019 22:28:02 > 4. Wait until the phone enter in FastBoot Mode
INFO : 18/01/2019 22:28:02 > Searching for a phone. Please wait...
INFO : 18/01/2019 22:28:02 > Detected phone model: VNS-L31
INFO : 18/01/2019 22:28:02 > Phone SN: FUH0216607011541
INFO : 18/01/2019 22:28:02 > Phone IMEI: 869400026338667
INFO : 18/01/2019 22:28:02 > Phone IMEI: 869400026345563
INFO : 18/01/2019 22:28:02 > SW version: VNS-L31C185B150
INFO : 18/01/2019 22:28:02 > Connecting to server..
INFO : 18/01/2019 22:28:02 > OK
INFO : 18/01/2019 22:28:02 > Authorizing...
INFO : 18/01/2019 22:28:05 > OK
INFO : 18/01/2019 22:28:05 > Resetting FRP lock..
WARN : 18/01/2019 22:28:10 > If the device didn't reboot automatically, try to reconnect USB cable or re-boot it manually.
WARN : 18/01/2019 22:28:10 > FRP lock is successfully reseted!
INFO : 18/01/2019 22:28:10 > Performed by 1.5.8.0 Software version.

[pintu_das]

zte blade a520 frp remove done




Welcome to Octoplus FRP Tool v.1.5.9.0
Platform: ZTE
Selected model: A520
Please, power phone OFF, press and hold "Vol-" button and connect USB cable.
Searching for a phone. Please wait...
Found phone on COM53
Detecting Chip Version...
HW Chip: MT6737: 0335.0000
HW Version: 8A00.CB00.0000.0000
Connecting...
Brom Version: 05
BootLoader Version: FE
Sending auth...
Searching Download Agent...
Selected DA: MTK_AllInOne_DA_v3.3001.2018-11-07.23:57_458956, n.10
Sending Download Agent...
DA sent successfully
Initializing DA...
Synchronizing with DA...
NAND Flash: not installed
eMMC Flash: .90014A48.38473461.32A54C4A.71DE7767
eMMC Flash: Hynix: H8G4a2
DA ver: 4.2.9B
Initializing Memory Flash..
Sending BootLoader Info...
Initialization successfully completed
Sending loaders...
Loader send successfuly.
Reading Flash Info...
EMMC rpmb size: 4 Mb
EMMC boot1 size: 4 Mb
EMMC boot2 size: 4 Mb
EMMC gp1 size: 0 Mb
EMMC gp2 size: 0 Mb
EMMC gp3 size: 0 Mb
EMMC gp4 size: 0 Mb
EMMC user area size: 7456 Mb
Internal RAM size: 128 Kb
External RAM size: 1024 Mb
Reading partition...
Reading info...
Brand: ZTE
Model: ZTE BLADE A520
Device: P637F10
Platform: mt6737m
Android version: 7.0
Display ID: ZTE_MY_BA520_V9.0
Searching for signatures...
Resetting FRP lock..
FRP lock is successfully reseted!
Backup saved as ZTE_A520_19-01-2019_17-17-16.dump file
Performed by 1.5.9.0 Software version.



Thanks Octopus team

[pintu_das]

itel A16 Plus frp remove done with Platform: __GENERAL RESET FRP METHODS

Selected model: SC7731E SIGN V2




https://i.imgur.com/v91uALQ.gif





Platform: __GENERAL RESET FRP METHODS
Selected model: SC7731E SIGN V2
Please, reconnect battery, press and hold "Vol+" or "Vol-" button and connect USB cable.
Searching for a phone. Please wait...
Found phone on COM6
Connecting...
Mobile Status: SPRD3
Sending preloader...
Mobile Status: Spreadtrum Boot Block version 1.1
Sending mainloader...
Reading info...
Brand: Itel
Model: itel A16 Plus
Device: itel-A16-Plus
Android version: 8.1.0
Display ID: A16Plus-SA332-8.1-OP-V008-20181016
Searching for signatures...
Resetting FRP lock..
FRP lock is successfully reseted!
Backup saved as __GENERAL RESET FRP METHODS_SC7731E SIGN V2_19-01-2019_18-26-59.dump file
Performed by 1.5.9.0 Software version.





Thanks Octopus team

[maxpatri9]

SAMSUNG G920P FRP DONE
Welcome to Octoplus FRP Tool v.1.5.9.0
Platform: SAMSUNG
Selected model: SM-G920P
To put SM-G920P into Download Mode, You have to perform the following steps:
1. Reconnect the battery.
2. Press and hold "Volume-" + "Home" + "Power ON" keys.
3. When phone turns on, press "Volume+" key.
Searching for a phone. Please wait...
Phone found.
Initializing..
PIT was read successfully.
Searching for UART interface.. COM8
Connect Samsung Micro UART cable(with 525K resistor), press and hold "Vol-" + "Power" buttons for 15-20 seconds
Searching for device. Please wait...
Resetting FRP lock..
FRP lock is successfully reseted!
Wait 3-4 min then goto "Menu -> Settings -> Backup and reset" and make "Factory data reset"
Performed by 1.5.9.0 Software version.

[gsmanam]

Welcome to Octoplus FRP Tool v.1.5.7.0
Platform: SAMSUNG
Selected model: SM-A510F
Searching for UART interface.. COM7
Connect Samsung Micro UART cable(with 525K resistor), press and hold "Vol-" + "Power" buttons for 15-20 seconds
Searching for device. Please wait...
Phone found.
Rebooting phone in Upload Mode...OK
Please connect phone to USB cable..
Searching for a phone. Please wait...OK
Reading data...
Checking operation...OK
Searching for UART interface.. COM7
Connect Samsung Micro UART cable(with 525K resistor), press and hold "Vol-" + "Power" buttons for 15-20 seconds
Searching for device. Please wait...
Phone found.
Resetting FRP lock..success
FRP lock is successfully reseted!
Performed by 1.5.7.0 Software version.

[Al-Magic]

LAVA IRIS 41 FRP lock is successfully

[khorsed_pabna]

Welcome to Octoplus FRP Tool v.1.5.9.0
Platform: __GENERAL RESET FRP METHODS
Selected model: MTK GENERAL
Please, power phone OFF and connect USB cable.
Searching for a phone. Please wait...
Found phone on COM14
Detecting Chip Version...
HW Chip: MT6580: 6580.0000
HW Version: 8A00.CA00.0000.0000
Connecting...
Brom Version: FF
BootLoader Version: 01
Searching Download Agent...
Selected DA: MTK_AllInOne_DA_v3.3001.2018-11-07.23:57_458956, n.11
Sending Download Agent...
DA sent successfully
Initializing DA...
Synchronizing with DA...
NAND Flash: not installed
eMMC Flash: .15010046.3832324D.4200B06E.C41323B5
eMMC Flash: Samsung: F822MB
DA ver: 4.2.9C
Initializing Memory Flash..
Initialization successfully completed
Sending loaders...
Loader send successfuly.
Reading Flash Info...
EMMC rpmb size: 4 Mb
EMMC boot1 size: 4 Mb
EMMC boot2 size: 4 Mb
EMMC gp1 size: 0 Mb
EMMC gp2 size: 0 Mb
EMMC gp3 size: 0 Mb
EMMC gp4 size: 0 Mb
EMMC user area size: 14910 Mb
Internal RAM size: 128 Kb
External RAM size: 1024 Mb
Reading partition...
Reading info...
Brand: WALTON
Model: Primo GH5 mini
Device: Primo_GH5_mini
Platform: mt6580
Android version: 5.1
Display ID: Primo_GH5_mini
Searching for signatures...
Resetting FRP lock..
FRP lock is successfully reseted!
Backup saved as WALTON_Primo GH5 mini_20-01-2019_12-31-52.dump file
Performed by 1.5.9.0 Software version.

[shehzadmemon]

Platform: __GENERAL RESET FRP METHODS
Selected model: MTK GENERAL
Please, power phone OFF and connect USB cable.
Searching for a phone. Please wait...
Found phone on COM7
Detecting Chip Version...
HW Chip: MT6580: 6580.0000
HW Version: 8A00.CA00.0000.0000
Connecting...
Brom Version: FF
BootLoader Version: 01
Searching Download Agent...
Selected DA: MTK_AllInOne_DA_v3.3001.2018-11-07.23:57_458956, n.11
Sending Download Agent...
DA sent successfully
Initializing DA...
Synchronizing with DA...
NAND Flash: not installed
eMMC Flash: .70010056.31303030.3850278E.B3FC6321
eMMC Flash: Pretec: V10008
DA ver: 4.2.9C
Initializing Memory Flash..
Initialization successfully completed
Sending loaders...
Loader send successfuly.
Reading Flash Info...
EMMC rpmb size: 4 Mb
EMMC boot1 size: 4 Mb
EMMC boot2 size: 4 Mb
EMMC gp1 size: 0 Mb
EMMC gp2 size: 0 Mb
EMMC gp3 size: 0 Mb
EMMC gp4 size: 0 Mb
EMMC user area size: 7216 Mb
Internal RAM size: 128 Kb
External RAM size: 1024 Mb
Reading partition...
Reading info...
Brand: IGO
Model: Ultra 2
Device: IGO Ultra 2
Platform: mt6580
Android version: 5.1
Display ID: IGO_Ultra2_SW_03
Searching for signatures...
FRP signature not found!
Backup saved as IGO_Ultra 2_20-01-2019_02-02-54.dump file
Performed by 1.5.9.0 Software version.
https://mega.nz/#!OW5iRAKB!xQO4J_KyR...NKkIQOB4VbcNOU

[mgbhatti]

Platform: HURRICANE
Selected model: GALAXY
Please, reconnect battery, press and hold "Vol+" or "Vol-" button and connect USB cable.
Searching for a phone. Please wait...
Found phone on COM14
Connecting...
Mobile Status: SPRD3
Sending preloader...
Mobile Status: Spreadtrum Boot Block version 1.1
Sending mainloader...
Reading info...
Brand: Hurricane
Model: Ace
Device: Ace
Platform: sc8830
Android version: 7.0
Display ID: Hurricane_Ace_IND_Ver1.0_20170718_1200
Searching for signatures...
Resetting FRP lock..
FRP lock is successfully reseted!
Backup saved as HURRICANE_GALAXY_20-01-2019_13-44-21.dump file
Performed by 1.5.9.0 Software version.