🐙 Post here success Reset FRP story with Octoplus FRP Tool - Page 217 - GSM-Forum

Dzomega · 02-10-2019, 02:10

INFO : 10/02/2019 2:03:57 AM > Welcome to Octoplus FRP Tool v.1.6.2.0
INFO : 10/02/2019 2:06:36 AM > Platform: HUAWEI
INFO : 10/02/2019 2:06:36 AM > Selected model: NMO-L31
INFO : 10/02/2019 2:06:36 AM > Put the phone in FastBoot Mode:
INFO : 10/02/2019 2:06:36 AM > 1. Remove SD and SIM cards from the phone
INFO : 10/02/2019 2:06:36 AM > 2. Power phone OFF
INFO : 10/02/2019 2:06:36 AM > 3. Press and hold "Vol-" and insert USB cable
INFO : 10/02/2019 2:06:36 AM > 4. Wait until the phone enter in FastBoot Mode
INFO : 10/02/2019 2:06:36 AM > Searching for a phone. Please wait...
INFO : 10/02/2019 2:06:37 AM > Detected phone model: NMO-L31
INFO : 10/02/2019 2:06:38 AM > Phone SN: EUC4C1682**
INFO : 10/02/2019 2:06:38 AM > Phone IMEI: 860906034*
INFO : 10/02/2019 2:06:38 AM > Phone IMEI: 860906034**
INFO : 10/02/2019 2:06:39 AM > SW version: NMO-L31C185***
INFO : 10/02/2019 2:06:40 AM > Connecting to server..
INFO : 10/02/2019 2:06:40 AM > OK
INFO : 10/02/2019 2:06:40 AM > Authorizing...
INFO : 10/02/2019 2:06:41 AM > OK
INFO : 10/02/2019 2:06:41 AM > Resetting FRP lock..
WARN : 10/02/2019 2:07:07 AM > If the device didn't reboot automatically, try to reconnect USB cable or re-boot it manually.
WARN : 10/02/2019 2:07:07 AM > FRP lock is successfully reseted!
INFO : 10/02/2019 2:07:07 AM > Performed by 1.6.2.0 Software version.
INFO : 10/02/2019 2:07:07 AM >

icecube1982 · 02-10-2019, 04:17

Welcome to Octoplus FRP Tool v.1.6.2.0
Platform: ALCATEL
Selected model: OT-4047X
Please, power phone OFF and connect USB cable.
Searching for a phone. Please wait...
Found phone on COM3
Detecting Chip Version...
HW Chip: MT6580: 6580.0000
HW Version: 8A00.CA00.0000.0000
Connecting...
Brom Version: FF
BootLoader Version: 01
Searching Download Agent...
Selected DA: MTK_AllInOne_DA_v3.3001.2018-11-07.23:57_458956, n.11
Sending Download Agent...
DA sent successfully
Initializing DA...
Synchronizing with DA...
NAND Flash: not installed
eMMC Flash: .90014A48.38473165.050746C6.C54854EF
eMMC Flash: Hynix: H8G1e
DA ver: 4.2.9C
Initializing Memory Flash..
Initialization successfully completed
Sending loaders...
Loader send successfuly.
Reading Flash Info...
EMMC rpmb size: 4 Mb
EMMC boot1 size: 4 Mb
EMMC boot2 size: 4 Mb
EMMC gp1 size: 0 Mb
EMMC gp2 size: 0 Mb
EMMC gp3 size: 0 Mb
EMMC gp4 size: 0 Mb
EMMC user area size: 7456 Mb
Internal RAM size: 128 Kb
External RAM size: 1024 Mb
Reading partition...
Reading info...
Brand: TCL
Model: 4047N
Device: U5_3G
Platform: mt6580
Android version: 7.0
Display ID: 010 03
Searching for signatures...
Resetting FRP lock..
FRP lock is successfully reseted!
Backup saved as ALCATEL_OT-4047X_10-02-2019_11-11-15.dump file
Performed by 1.6.2.0 Software version.

pintu_das · 02-10-2019, 07:16

symphony p8 pro frp remove done with da file

Thanks Octopus team

karim1980 · 02-10-2019, 09:31

WIKO ROBBY 2 FRP done

INFO : 10-Feb-19 9:17:08 AM > Platform: __GENERAL RESET FRP METHODS
INFO : 10-Feb-19 9:17:08 AM > Selected model: QUALCOMM EDL AUTODETECT
WARN : 10-Feb-19 9:17:08 AM > Please, power phone OFF put the phone in EDL mode and connect USB cable.
INFO : 10-Feb-19 9:17:08 AM > Searching for a phone. Please wait...
INFO : 10-Feb-19 9:17:08 AM > Found phone on COM205
INFO : 10-Feb-19 9:17:08 AM > Mode: Qualcomm 9008
INFO : 10-Feb-19 9:17:08 AM > Connecting...
INFO : 10-Feb-19 9:17:10 AM > Reading info...
INFO : 10-Feb-19 9:17:10 AM > QC Block ID: 0D07C756
INFO : 10-Feb-19 9:17:10 AM > QC HW ID: 009600E100007705
INFO : 10-Feb-19 9:17:10 AM > QC CPU: Snapdragon 210 MSM8909
INFO : 10-Feb-19 9:17:10 AM > QC HASH: AA4F344B6FE27F15FA9D6665C491C43B14467C083D150E4BFF 9BD0619A67170D
INFO : 10-Feb-19 9:17:10 AM > Searching loader...
INFO : 10-Feb-19 9:17:11 AM > Sending loaders...
INFO : 10-Feb-19 9:17:19 AM > Loader send successfuly.
INFO : 10-Feb-19 9:17:19 AM > Reconnecting...
INFO : 10-Feb-19 9:17:29 AM > Checking request..
INFO : 10-Feb-19 9:17:30 AM > Reading partition...
INFO : 10-Feb-19 9:17:30 AM > Reading info...
INFO : 10-Feb-19 9:17:31 AM > Brand: WIKO
INFO : 10-Feb-19 9:17:31 AM > Model: ROBBY2
INFO : 10-Feb-19 9:17:31 AM > Device: ROBBY2
INFO : 10-Feb-19 9:17:31 AM > Platform: msm8909
INFO : 10-Feb-19 9:17:31 AM > Android version: 7.1.1
INFO : 10-Feb-19 9:17:31 AM > Display ID: NMF26F release-keys
INFO : 10-Feb-19 9:17:31 AM > Searching for signatures...
INFO : 10-Feb-19 9:17:32 AM > Resetting FRP lock..
WARN : 10-Feb-19 9:17:32 AM > FRP lock is successfully reseted!
INFO : 10-Feb-19 9:17:32 AM > Rebooting phone
INFO : 10-Feb-19 9:17:34 AM > Backup saved as __GENERAL RESET FRP METHODS_QUALCOMM EDL AUTODETECT_10-02-2019_09-17-08.dump file
INFO : 10-Feb-19 9:17:34 AM > Performed by 1.6.0.0 Software version.

karim1980 · 02-10-2019, 09:31

WIKO ROBBY 2 FRP done

INFO : 10-Feb-19 9:17:08 AM > Platform: __GENERAL RESET FRP METHODS
INFO : 10-Feb-19 9:17:08 AM > Selected model: QUALCOMM EDL AUTODETECT
WARN : 10-Feb-19 9:17:08 AM > Please, power phone OFF put the phone in EDL mode and connect USB cable.
INFO : 10-Feb-19 9:17:08 AM > Searching for a phone. Please wait...
INFO : 10-Feb-19 9:17:08 AM > Found phone on COM205
INFO : 10-Feb-19 9:17:08 AM > Mode: Qualcomm 9008
INFO : 10-Feb-19 9:17:08 AM > Connecting...
INFO : 10-Feb-19 9:17:10 AM > Reading info...
INFO : 10-Feb-19 9:17:10 AM > QC Block ID: 0D07C756
INFO : 10-Feb-19 9:17:10 AM > QC HW ID: 009600E100007705
INFO : 10-Feb-19 9:17:10 AM > QC CPU: Snapdragon 210 MSM8909
INFO : 10-Feb-19 9:17:10 AM > QC HASH: AA4F344B6FE27F15FA9D6665C491C43B14467C083D150E4BFF 9BD0619A67170D
INFO : 10-Feb-19 9:17:10 AM > Searching loader...
INFO : 10-Feb-19 9:17:11 AM > Sending loaders...
INFO : 10-Feb-19 9:17:19 AM > Loader send successfuly.
INFO : 10-Feb-19 9:17:19 AM > Reconnecting...
INFO : 10-Feb-19 9:17:29 AM > Checking request..
INFO : 10-Feb-19 9:17:30 AM > Reading partition...
INFO : 10-Feb-19 9:17:30 AM > Reading info...
INFO : 10-Feb-19 9:17:31 AM > Brand: WIKO
INFO : 10-Feb-19 9:17:31 AM > Model: ROBBY2
INFO : 10-Feb-19 9:17:31 AM > Device: ROBBY2
INFO : 10-Feb-19 9:17:31 AM > Platform: msm8909
INFO : 10-Feb-19 9:17:31 AM > Android version: 7.1.1
INFO : 10-Feb-19 9:17:31 AM > Display ID: NMF26F release-keys
INFO : 10-Feb-19 9:17:31 AM > Searching for signatures...
INFO : 10-Feb-19 9:17:32 AM > Resetting FRP lock..
WARN : 10-Feb-19 9:17:32 AM > FRP lock is successfully reseted!
INFO : 10-Feb-19 9:17:32 AM > Rebooting phone
INFO : 10-Feb-19 9:17:34 AM > Backup saved as __GENERAL RESET FRP METHODS_QUALCOMM EDL AUTODETECT_10-02-2019_09-17-08.dump file
INFO : 10-Feb-19 9:17:34 AM > Performed by 1.6.0.0 Software version.

lyes_albert · 02-10-2019, 12:06

Full logs of the operation/

Quote:

Device's Basic Info;

Code:

EMMC rpmb size: 4 Mb
EMMC boot1 size: 4 Mb
EMMC boot2 size: 4 Mb
EMMC gp1 size: 0 Mb
EMMC gp2 size: 0 Mb
EMMC gp3 size: 0 Mb
EMMC gp4 size: 0 Mb
EMMC user area size: 7457 Mb
Internal RAM size: 128 Kb
External RAM size: 1024 Mb
Reading partition...
Reading info...
Brand: Danew
Model: Konnect_601
Device: Konnect_601
Platform: mt6580
Android version: 7.0
Display ID: Konnect_601_V008_20180810

FRP Removal:

Code:

Reading Flash Info...
EMMC rpmb size: 4 Mb
EMMC boot1 size: 4 Mb
EMMC boot2 size: 4 Mb
EMMC gp1 size: 0 Mb
EMMC gp2 size: 0 Mb
EMMC gp3 size: 0 Mb
EMMC gp4 size: 0 Mb
EMMC user area size: 7457 Mb
Internal RAM size: 128 Kb
External RAM size: 1024 Mb
Reading partition...
Reading info...
Brand: Danew
Model: Konnect_601
Device: Konnect_601
Platform: mt6580
Android version: 7.0
Display ID: Konnect_601_V008_20180810
Searching for signatures...
Resetting FRP lock..
FRP lock is successfully reseted!
Backup saved as Danew_Konnect_601_10-02-2019_11-58-25.dump file
Performed by 1.6.2.0 Software version.

wahiditunes · 02-10-2019, 19:57

Welcome to Octoplus FRP Tool v.1.6.2.0
Platform: HUAWEI
Selected model: AGS-L09
Put the phone in FastBoot Mode:
1. Remove SD and SIM cards from the phone
2. Power phone OFF
3. Press and hold "Vol-" and insert USB cable
4. Wait until the phone enter in FastBoot Mode
Searching for a phone. Please wait...
Detected phone model: AGS-L09
Phone SN: HEKNU18127105236
Phone IMEI: 864272038224267
Connecting to server..OK
Authorizing...OK
Resetting FRP lock..
If the device didn't reboot automatically, try to reconnect USB cable or re-boot it manually.
FRP lock is successfully reseted!
Performed by 1.6.2.0 Software version.

pintu_das · 02-11-2019, 06:24

WE L5 frp remove done with Selected model: SC7731 V7

Platform: __GENERAL RESET FRP METHODS
Selected model: SC7731 V7
Please, reconnect battery, press and hold "Vol+" or "Vol-" button and connect USB cable.
Searching for a phone. Please wait...
Found phone on COM101
Connecting...
Mobile Status: SPRD3
Sending preloader...
Reconnecting...
Mobile Status: Spreadtrum Boot Block version 1.1
Sending mainloader...
Reading info...
Brand: SPRD
Model: L5
Device: sp7731g_1h10_81_df_df013_we_l5_gps_qhd
Platform: sc8830
Android version: 6.0
Display ID: MRA58K release-keys
Searching for signatures...
Resetting FRP lock..
FRP lock is successfully reseted!
Backup saved as __GENERAL RESET FRP METHODS_SC7731 V7_11-02-2019_11-20-42.dump file
Performed by 1.6.2.0 Software version.

Thanks Octopus team

pintu_das · 02-11-2019, 07:53

walton Primo F8 frp remove done with Selected model: MTK CUSTOM or da file

Platform: __GENERAL RESET FRP METHODS
Selected model: MTK CUSTOM
Selected Download Agent: C:\Users\pintu das\Desktop\MTK_AllInOne_DA_SP.bin
Please, power phone OFF (press and hold "Vol+" or "Vol-" button) and connect USB cable.
Searching for a phone. Please wait...
Found phone on COM97
Detecting Chip Version...
HW Chip: MT6580: 6580.0000
HW Version: 8A00.CA00.0000.0000
Connecting...
Brom Version: FF
BootLoader Version: 01
Searching Download Agent...
Selected DA: MTK_AllInOne_DA_v3.3001.00.00, n.14
Sending Download Agent...
DA sent successfully
Initializing DA...
Synchronizing with DA...
NAND Flash: not installed
eMMC Flash: .90014A48.38473461.32A44A20.48361479
eMMC Flash: Hynix: H8G4a2
DA ver: 4.2.9C
Initializing Memory Flash..
Initialization successfully completed
Sending loaders...
Loader send successfuly.
Reading Flash Info...
EMMC rpmb size: 4 Mb
EMMC boot1 size: 4 Mb
EMMC boot2 size: 4 Mb
EMMC gp1 size: 0 Mb
EMMC gp2 size: 0 Mb
EMMC gp3 size: 0 Mb
EMMC gp4 size: 0 Mb
EMMC user area size: 7456 Mb
Internal RAM size: 128 Kb
External RAM size: 1024 Mb
Reading partition...
Reading info...
Brand: WALTON
Model: Primo F8
Device: Primo_F8
Platform: mt6580
Android version: 7.0
Display ID: Primo_F8_S03_12292017
Searching for signatures...
Resetting FRP lock..
FRP lock is successfully reseted!
Backup saved as WALTON_Primo F8_11-02-2019_12-23-23.dump file
Performed by 1.6.2.0 Software version.

Thanks Octopus team

bossko · 02-11-2019, 09:50

Platform: HUAWEI
Selected model: LLD-L31
Put the phone in FastBoot Mode:
1. Remove SD and SIM cards from the phone
2. Power phone OFF
3. Press and hold "Vol-" and insert USB cable
4. Wait until the phone enter in FastBoot Mode
Searching for a phone. Please wait...
Detected phone model: LLD-L31
Phone SN: FPMDU18126005220
Phone IMEI: 866317033381303
Phone IMEI2: 866317033417313
SW version: LLD-L31 8.0.0.141(C432)
Connecting to server..OK
Authorizing...OK
Resetting FRP lock..
FRP lock is successfully reseted!
Performed by 1.6.2.0 Software version.

but phone didnt reset and low-level factory reset
not work!

genci titi 2002 · 02-11-2019, 10:01

Welcome to Octoplus FRP Tool v.1.6.2.0
Platform: VODAFONE
Selected model: VFD320
Please, power phone OFF and connect USB cable.
Searching for a phone. Please wait...
Found phone on COM13
Detecting Chip Version...
HW Chip: MT6580: 6580.0000
HW Version: 8A00.CA00.0000.0000
Connecting...
Brom Version: FF
BootLoader Version: 01
Searching Download Agent...
Selected DA: MTK_AllInOne_DA_v3.3001.2017-07-19.22:57, n.11
Sending Download Agent...
DA sent successfully
Initializing DA...
Synchronizing with DA...
NAND Flash: not installed
eMMC Flash: .70010045.45344544.34011909.6B2F25CF
eMMC Flash: Pretec: EE4ED4
DA ver: 4.2.9C
Initializing Memory Flash..
Initialization successfully completed
Sending loaders...
Loader send successfuly.
Reading Flash Info...
EMMC rpmb size: 0 Mb
EMMC boot1 size: 2 Mb
EMMC boot2 size: 2 Mb
EMMC gp1 size: 0 Mb
EMMC gp2 size: 0 Mb
EMMC gp3 size: 0 Mb
EMMC gp4 size: 0 Mb
EMMC user area size: 3616 Mb
Internal RAM size: 128 Kb
External RAM size: 512 Mb
Reading partition...
Reading info...
Brand: Vodafone
Model: VFD320
Device: VFD320
Platform: mt6580
Android version: 8.1.0
Display ID: O11019 release-keys
Searching for signatures...
Resetting FRP lock..
FRP lock is successfully reseted!
Backup saved as VODAFONE_VFD320_11-02-2019_10-02-10.dump file
Performed by 1.6.2.0 Software version

Salatiell · 02-11-2019, 10:13

Welcome to Octoplus FRP Tool v.1.0.1
Platform: HUAWEI
Selected model: WAS-LX1
Put the phone in FastBoot Mode:
1. Remove SD and SIM cards from the phone
2. Power phone OFF
3. Press and hold "Vol-" and insert USB cable
4. Wait until the phone enter in FastBoot Mode
Searching for a phone. Please wait...
Detected phone model: WAS-LX1
Phone SN: *********
Phone IMEI: *********
Phone IMEI2: *********
SW version: WAS-LX1C738B170
Connecting to server..
OK
Authorizing...
OK
Resetting FRP lock..
FRP lock is successfully reseted!
Performed by 1.0.1 Software version.
*

wagonstev · 02-11-2019, 11:15

X-TIGI_V33 FRP lock is successfully reseted

Welcome to Octoplus FRP Tool v.1.6.1.0
Platform: X-TIGI
Selected model: V4
Please, power phone OFF and connect USB cable.
Searching for a phone. Please wait...
Found phone on COM25
Detecting Chip Version...
HW Chip: MT6580: 6580.0000
HW Version: 8A00.CA00.0000.0000
Connecting...
Brom Version: FF
BootLoader Version: 01
Searching Download Agent...
Selected DA: MTK_AllInOne_DA_v3.3001.2018-11-07.23:57_458956, n.11
Sending Download Agent...
DA sent successfully
Initializing DA...
Synchronizing with DA...
NAND Flash: not installed
eMMC Flash: .15010046.4536324D.42036025.A8A1A4C7
eMMC Flash: Samsung: FE62MB
DA ver: 4.2.9C
Initializing Memory Flash..
Initialization successfully completed
Sending loaders...
Loader send successfuly.
Reading Flash Info...
EMMC rpmb size: 4 Mb
EMMC boot1 size: 4 Mb
EMMC boot2 size: 4 Mb
EMMC gp1 size: 0 Mb
EMMC gp2 size: 0 Mb
EMMC gp3 size: 0 Mb
EMMC gp4 size: 0 Mb
EMMC user area size: 14910 Mb
Internal RAM size: 128 Kb
External RAM size: 1024 Mb
Reading partition...
Reading info...
Brand: X-TIGI
Model: X-TIGI_V33
Device: X-TIGI_V33
Platform: mt6580
Android version: 7.0
Display ID: X-TIGI_V33_V06
Searching for signatures...
Resetting FRP lock..
FRP lock is successfully reseted!

Backup saved as X-TIGI_V4_11-02-2015_09-47-04.dump file
Performed by 1.6.1.0 Software version.

SandyBridge · 02-11-2019, 12:07

Code:

Welcome to Octoplus FRP Tool v.1.6.2.0
Platform: HUAWEI
Selected model: AUM-L29
Put the phone in FastBoot Mode:
1. Remove SD and SIM cards from the phone
2. Power phone OFF
3. Press and hold "Vol-" and insert USB cable
4. Wait until the phone enter in FastBoot Mode
Searching for a phone. Please wait...
Detected phone model: AUM-L29
Phone SN: QDG9X18A19
Phone IMEI: 86615904xxxxxxx
Connecting to server..OK
Authorizing...OK
Resetting FRP lock..
If the device didn't reboot automatically, try to reconnect USB cable or re-boot it manually.
FRP lock is successfully reseted!
Performed by 1.6.2.0 Software version.

louka · 02-11-2019, 12:08

Welcome to Octoplus FRP Tool v.1.6.2.0
Platform: MEIZU
Selected model: M5 (M611H)
Please, power phone OFF, press and hold "Vol+" button and connect USB cable.
Searching for a phone. Please wait...
Found phone on COM20
Detecting Chip Version...
HW Chip: MT6755: 0326.0000
HW Version: 8A00.CB00.0001.0000
HW Chip: MT6750: 00001C42
Connecting...
Brom Version: FF
BootLoader Version: 01
Searching Download Agent...
Selected DA: MTK_AllInOne_DA_Octoplus_v1.0_PL, n.0
Sending Download Agent...
DA sent successfully
Initializing DA...
Synchronizing with DA...
Mobile Status: SYNC
DA ver: 2099.3.3
Mobile Status: preloader
Initializing Memory Flash..
Initialization successfully completed
Sending loaders...
Mobile Status: SYNC
Reading Flash Info...
EMMC rpmb size: 4 Mb
EMMC boot1 size: 4 Mb
EMMC boot2 size: 4 Mb
EMMC gp1 size: 0 Mb
EMMC gp2 size: 0 Mb
EMMC gp3 size: 0 Mb
EMMC gp4 size: 0 Mb
EMMC user area size: 29820 Mb
eMMC Flash: .90014A48.42473461.32A55544.D11614F9
eMMC Flash: Hynix: HBG4a2
Internal RAM size: 256 Kb
External RAM size: 3072 Mb
Reading partition...
Reading info...
Brand: Meizu
Model: MEIZU_M5
Device: MEIZU_M5
Platform: mt6750
Android version: 6.0
Display ID: Flyme 6.2.0.0G
Searching for signatures...
Resetting FRP lock..
FRP lock is successfully reseted!
Backup saved as MEIZU_M5 (M611H)_11-02-2019_12-03-55.dump file
Performed by 1.6.2.0 Software version.

02-10-2019, 04:17	#3242 (permalink)
icecube1982 Freak Poster Join Date: Apr 2009 Location: Dingle, Iloilo, Philippines Posts: 265 Member: 1019612 Status: Offline Thanks Meter: 93	Alcatel 4047N frp Reset done via Octoplus FRP tool Welcome to Octoplus FRP Tool v.1.6.2.0 Platform: ALCATEL Selected model: OT-4047X Please, power phone OFF and connect USB cable. Searching for a phone. Please wait... Found phone on COM3 Detecting Chip Version... HW Chip: MT6580: 6580.0000 HW Version: 8A00.CA00.0000.0000 Connecting... Brom Version: FF BootLoader Version: 01 Searching Download Agent... Selected DA: MTK_AllInOne_DA_v3.3001.2018-11-07.23:57_458956, n.11 Sending Download Agent... DA sent successfully Initializing DA... Synchronizing with DA... NAND Flash: not installed eMMC Flash: .90014A48.38473165.050746C6.C54854EF eMMC Flash: Hynix: H8G1e DA ver: 4.2.9C Initializing Memory Flash.. Initialization successfully completed Sending loaders... Loader send successfuly. Reading Flash Info... EMMC rpmb size: 4 Mb EMMC boot1 size: 4 Mb EMMC boot2 size: 4 Mb EMMC gp1 size: 0 Mb EMMC gp2 size: 0 Mb EMMC gp3 size: 0 Mb EMMC gp4 size: 0 Mb EMMC user area size: 7456 Mb Internal RAM size: 128 Kb External RAM size: 1024 Mb Reading partition... Reading info... Brand: TCL Model: 4047N Device: U5_3G Platform: mt6580 Android version: 7.0 Display ID: 010 03 Searching for signatures... Resetting FRP lock.. FRP lock is successfully reseted! Backup saved as ALCATEL_OT-4047X_10-02-2019_11-11-15.dump file Performed by 1.6.2.0 Software version.

02-10-2019, 07:16	#3243 (permalink)
pintu_das No Life Poster Join Date: Jan 2015 Location: Narsingdi, Dhaka, Bangladesh Age: 29 Posts: 2,218 Member: 2325851 Status: Offline Sonork: 100.1680491 Thanks Meter: 2,394	symphony p8 pro frp remove done with da file symphony p8 pro frp remove done with da file Thanks Octopus team

02-11-2019, 06:24	#3248 (permalink)
pintu_das No Life Poster Join Date: Jan 2015 Location: Narsingdi, Dhaka, Bangladesh Age: 29 Posts: 2,218 Member: 2325851 Status: Offline Sonork: 100.1680491 Thanks Meter: 2,394	WE L5 frp remove done with Selected model: SC7731 V7 WE L5 frp remove done with Selected model: SC7731 V7 Platform: __GENERAL RESET FRP METHODS Selected model: SC7731 V7 Please, reconnect battery, press and hold "Vol+" or "Vol-" button and connect USB cable. Searching for a phone. Please wait... Found phone on COM101 Connecting... Mobile Status: SPRD3 Sending preloader... Reconnecting... Mobile Status: Spreadtrum Boot Block version 1.1 Sending mainloader... Reading info... Brand: SPRD Model: L5 Device: sp7731g_1h10_81_df_df013_we_l5_gps_qhd Platform: sc8830 Android version: 6.0 Display ID: MRA58K release-keys Searching for signatures... Resetting FRP lock.. FRP lock is successfully reseted! Backup saved as __GENERAL RESET FRP METHODS_SC7731 V7_11-02-2019_11-20-42.dump file Performed by 1.6.2.0 Software version. Thanks Octopus team

02-11-2019, 07:53	#3249 (permalink)
pintu_das No Life Poster Join Date: Jan 2015 Location: Narsingdi, Dhaka, Bangladesh Age: 29 Posts: 2,218 Member: 2325851 Status: Offline Sonork: 100.1680491 Thanks Meter: 2,394	walton Primo F8 frp remove done with Selected model: MTK CUSTOM or da file walton Primo F8 frp remove done with Selected model: MTK CUSTOM or da file Platform: __GENERAL RESET FRP METHODS Selected model: MTK CUSTOM Selected Download Agent: C:\Users\pintu das\Desktop\MTK_AllInOne_DA_SP.bin Please, power phone OFF (press and hold "Vol+" or "Vol-" button) and connect USB cable. Searching for a phone. Please wait... Found phone on COM97 Detecting Chip Version... HW Chip: MT6580: 6580.0000 HW Version: 8A00.CA00.0000.0000 Connecting... Brom Version: FF BootLoader Version: 01 Searching Download Agent... Selected DA: MTK_AllInOne_DA_v3.3001.00.00, n.14 Sending Download Agent... DA sent successfully Initializing DA... Synchronizing with DA... NAND Flash: not installed eMMC Flash: .90014A48.38473461.32A44A20.48361479 eMMC Flash: Hynix: H8G4a2 DA ver: 4.2.9C Initializing Memory Flash.. Initialization successfully completed Sending loaders... Loader send successfuly. Reading Flash Info... EMMC rpmb size: 4 Mb EMMC boot1 size: 4 Mb EMMC boot2 size: 4 Mb EMMC gp1 size: 0 Mb EMMC gp2 size: 0 Mb EMMC gp3 size: 0 Mb EMMC gp4 size: 0 Mb EMMC user area size: 7456 Mb Internal RAM size: 128 Kb External RAM size: 1024 Mb Reading partition... Reading info... Brand: WALTON Model: Primo F8 Device: Primo_F8 Platform: mt6580 Android version: 7.0 Display ID: Primo_F8_S03_12292017 Searching for signatures... Resetting FRP lock.. FRP lock is successfully reseted! Backup saved as WALTON_Primo F8_11-02-2019_12-23-23.dump file Performed by 1.6.2.0 Software version. Thanks Octopus team

02-11-2019, 10:01	#3251 (permalink)
genci titi 2002 No Life Poster Join Date: Oct 2005 Location: TITI 2002 SERVIS CELULAR PG/AL Posts: 4,276 Member: 193804 Status: Offline Sonork: 100.1684818 Thanks Meter: 1,786	Vodafone VFD320 FRP lock is successfully reseted! Welcome to Octoplus FRP Tool v.1.6.2.0 Platform: VODAFONE Selected model: VFD320 Please, power phone OFF and connect USB cable. Searching for a phone. Please wait... Found phone on COM13 Detecting Chip Version... HW Chip: MT6580: 6580.0000 HW Version: 8A00.CA00.0000.0000 Connecting... Brom Version: FF BootLoader Version: 01 Searching Download Agent... Selected DA: MTK_AllInOne_DA_v3.3001.2017-07-19.22:57, n.11 Sending Download Agent... DA sent successfully Initializing DA... Synchronizing with DA... NAND Flash: not installed eMMC Flash: .70010045.45344544.34011909.6B2F25CF eMMC Flash: Pretec: EE4ED4 DA ver: 4.2.9C Initializing Memory Flash.. Initialization successfully completed Sending loaders... Loader send successfuly. Reading Flash Info... EMMC rpmb size: 0 Mb EMMC boot1 size: 2 Mb EMMC boot2 size: 2 Mb EMMC gp1 size: 0 Mb EMMC gp2 size: 0 Mb EMMC gp3 size: 0 Mb EMMC gp4 size: 0 Mb EMMC user area size: 3616 Mb Internal RAM size: 128 Kb External RAM size: 512 Mb Reading partition... Reading info... Brand: Vodafone Model: VFD320 Device: VFD320 Platform: mt6580 Android version: 8.1.0 Display ID: O11019 release-keys Searching for signatures... Resetting FRP lock.. FRP lock is successfully reseted! Backup saved as VODAFONE_VFD320_11-02-2019_10-02-10.dump file Performed by 1.6.2.0 Software version

02-10-2019, 19:57	#3247 (permalink)
wahiditunes Freak Poster Join Date: Jun 2017 Location: SAUDI ARABIA RIYADH Posts: 358 Member: 2725078 Status: Offline Sonork: 1680162 Thanks Meter: 173	Welcome to Octoplus FRP Tool v.1.6.2.0 Platform: HUAWEI Selected model: AGS-L09 Put the phone in FastBoot Mode: 1. Remove SD and SIM cards from the phone 2. Power phone OFF 3. Press and hold "Vol-" and insert USB cable 4. Wait until the phone enter in FastBoot Mode Searching for a phone. Please wait... Detected phone model: AGS-L09 Phone SN: HEKNU18127105236 Phone IMEI: 864272038224267 Connecting to server..OK Authorizing...OK Resetting FRP lock.. If the device didn't reboot automatically, try to reconnect USB cable or re-boot it manually. FRP lock is successfully reseted! Performed by 1.6.2.0 Software version.

02-11-2019, 09:50	#3250 (permalink)
bossko No Life Poster Join Date: Nov 2002 Location: slovakia Age: 47 Posts: 1,042 Member: 17761 Status: Offline Thanks Meter: 93	Platform: HUAWEI Selected model: LLD-L31 Put the phone in FastBoot Mode: 1. Remove SD and SIM cards from the phone 2. Power phone OFF 3. Press and hold "Vol-" and insert USB cable 4. Wait until the phone enter in FastBoot Mode Searching for a phone. Please wait... Detected phone model: LLD-L31 Phone SN: FPMDU18126005220 Phone IMEI: 866317033381303 Phone IMEI2: 866317033417313 SW version: LLD-L31 8.0.0.141(C432) Connecting to server..OK Authorizing...OK Resetting FRP lock.. FRP lock is successfully reseted! Performed by 1.6.2.0 Software version. but phone didnt reset and low-level factory reset not work!

02-11-2019, 10:13	#3252 (permalink)
Salatiell Insane Poster Join Date: Mar 2016 Age: 32 Posts: 71 Member: 2544984 Status: Offline Sonork: Salatiel net Thanks Meter: 11	Welcome to Octoplus FRP Tool v.1.0.1 Platform: HUAWEI Selected model: WAS-LX1 Put the phone in FastBoot Mode: 1. Remove SD and SIM cards from the phone 2. Power phone OFF 3. Press and hold "Vol-" and insert USB cable 4. Wait until the phone enter in FastBoot Mode Searching for a phone. Please wait... Detected phone model: WAS-LX1 Phone SN: ******* Phone IMEI: ***** Phone IMEI2: ******* SW version: WAS-LX1C738B170 Connecting to server.. OK Authorizing... OK Resetting FRP lock.. FRP lock is successfully reseted! Performed by 1.0.1 Software version. *

02-11-2019, 11:15	#3253 (permalink)
wagonstev No Life Poster Join Date: Jun 2014 Location: Ghana Age: 32 Posts: 536 Member: 2207285 Status: Offline Thanks Meter: 127	X-TIGI_V33 FRP lock is successfully reseted X-TIGI_V33 FRP lock is successfully reseted Welcome to Octoplus FRP Tool v.1.6.1.0 Platform: X-TIGI Selected model: V4 Please, power phone OFF and connect USB cable. Searching for a phone. Please wait... Found phone on COM25 Detecting Chip Version... HW Chip: MT6580: 6580.0000 HW Version: 8A00.CA00.0000.0000 Connecting... Brom Version: FF BootLoader Version: 01 Searching Download Agent... Selected DA: MTK_AllInOne_DA_v3.3001.2018-11-07.23:57_458956, n.11 Sending Download Agent... DA sent successfully Initializing DA... Synchronizing with DA... NAND Flash: not installed eMMC Flash: .15010046.4536324D.42036025.A8A1A4C7 eMMC Flash: Samsung: FE62MB DA ver: 4.2.9C Initializing Memory Flash.. Initialization successfully completed Sending loaders... Loader send successfuly. Reading Flash Info... EMMC rpmb size: 4 Mb EMMC boot1 size: 4 Mb EMMC boot2 size: 4 Mb EMMC gp1 size: 0 Mb EMMC gp2 size: 0 Mb EMMC gp3 size: 0 Mb EMMC gp4 size: 0 Mb EMMC user area size: 14910 Mb Internal RAM size: 128 Kb External RAM size: 1024 Mb Reading partition... Reading info... Brand: X-TIGI Model: X-TIGI_V33 Device: X-TIGI_V33 Platform: mt6580 Android version: 7.0 Display ID: X-TIGI_V33_V06 Searching for signatures... Resetting FRP lock.. FRP lock is successfully reseted! Backup saved as X-TIGI_V4_11-02-2015_09-47-04.dump file Performed by 1.6.1.0 Software version.

02-11-2019, 12:08	#3255 (permalink)
louka No Life Poster Join Date: Nov 2005 Posts: 947 Member: 198016 Status: Offline Sonork: 100.1602918 Thanks Meter: 408	MEIZU M5 FRP lock is successfully reseted Welcome to Octoplus FRP Tool v.1.6.2.0 Platform: MEIZU Selected model: M5 (M611H) Please, power phone OFF, press and hold "Vol+" button and connect USB cable. Searching for a phone. Please wait... Found phone on COM20 Detecting Chip Version... HW Chip: MT6755: 0326.0000 HW Version: 8A00.CB00.0001.0000 HW Chip: MT6750: 00001C42 Connecting... Brom Version: FF BootLoader Version: 01 Searching Download Agent... Selected DA: MTK_AllInOne_DA_Octoplus_v1.0_PL, n.0 Sending Download Agent... DA sent successfully Initializing DA... Synchronizing with DA... Mobile Status: SYNC DA ver: 2099.3.3 Mobile Status: preloader Initializing Memory Flash.. Initialization successfully completed Sending loaders... Mobile Status: SYNC Reading Flash Info... EMMC rpmb size: 4 Mb EMMC boot1 size: 4 Mb EMMC boot2 size: 4 Mb EMMC gp1 size: 0 Mb EMMC gp2 size: 0 Mb EMMC gp3 size: 0 Mb EMMC gp4 size: 0 Mb EMMC user area size: 29820 Mb eMMC Flash: .90014A48.42473461.32A55544.D11614F9 eMMC Flash: Hynix: HBG4a2 Internal RAM size: 256 Kb External RAM size: 3072 Mb Reading partition... Reading info... Brand: Meizu Model: MEIZU_M5 Device: MEIZU_M5 Platform: mt6750 Android version: 6.0 Display ID: Flyme 6.2.0.0G Searching for signatures... Resetting FRP lock.. FRP lock is successfully reseted! Backup saved as MEIZU_M5 (M611H)_11-02-2019_12-03-55.dump file Performed by 1.6.2.0 Software version.

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode