🐙 Post here success Reset FRP story with Octoplus FRP Tool

[ThePhoneTechDoc]

INFO : 3/12/2018 2:52:45 PM > Welcome to Octoplus FRP Tool v.1.1.7
INFO : 3/12/2018 2:53:45 PM > Platform: SAMSUNG
INFO : 3/12/2018 2:53:45 PM > Selected model: SM-J530G
INFO : 3/12/2018 2:53:46 PM > Searching for a phone (waiting for ADB device)...
WARN : 3/12/2018 2:53:50 PM > Please, press "OK" button on the phone to allow USB debugging..
INFO : 3/12/2018 2:53:52 PM > Reading info...
INFO : 3/12/2018 2:54:02 PM > Detected phone model: SM-J530G
INFO : 3/12/2018 2:54:02 PM > Firmware compiled date: Mon Sep 25 13:05:26 KST 2017
INFO : 3/12/2018 2:54:02 PM > PDA version: J530GUBU1AQI4
INFO : 3/12/2018 2:54:02 PM > CSC version: J530GUUB1AQI3
INFO : 3/12/2018 2:54:02 PM > SW version: J530GUBU1AQI3
INFO : 3/12/2018 2:54:02 PM > Phone SN: RF8J91CY5NX
INFO : 3/12/2018 2:54:02 PM > Android version: 7.0 (NRD90M)
INFO : 3/12/2018 2:54:02 PM > Sales code: TPA
INFO : 3/12/2018 2:54:02 PM > Country: PANAMA
INFO : 3/12/2018 2:54:02 PM > HW platform: exynos5
INFO : 3/12/2018 2:54:02 PM > HW Chip: exynos7870
INFO : 3/12/2018 2:54:02 PM > HW Modem: SHANNON315
INFO : 3/12/2018 2:54:02 PM > Security patch level: 2017-08-01
INFO : 3/12/2018 2:54:02 PM > Codename: j5y17lteub
INFO : 3/12/2018 2:54:02 PM > Resetting FRP lock..
WARN : 3/12/2018 2:54:28 PM > FRP lock is successfully reseted!
BINF : 3/12/2018 2:54:28 PM > Goto "Menu->Settings->Backup and reset" and make "Factory data reset"
INFO : 3/12/2018 2:54:28 PM > Performed by 1.1.7 Software version.

[rasgula]

Alcatel 5054O FRP Successfully Reseted:

Platform: ALCATEL
Selected model: OT-5054O
Please, power phone OFF and connect USB cable.
Searching for a phone. Please wait...
Found phone on COM376
Mode: Diagnostic
Rebooting to Qualcomm 9008 mode...
Found phone on COM121
Mode: Qualcomm 9008
Connecting...
Sending loaders...
Loader send successfuly.
Reconnecting...
Checking request..
Reading partition...
Reading info...
Brand: TCL
Model: Alcatel_5054O
Device: Pop355
Platform: msm8909
Android version: 5.1.1
Display ID: LMY47V release-keys
Searching for signatures...
Resetting FRP lock..
FRP lock is successfully reseted!
Rebooting phone
Backup saved as ALCATEL_OT-5054O_13-03-2018_00-18-42.dump file
Performed by 1.1.7 Software version.

[dragosgsm]

Latest version works great ,even with ASUS latest security:


Platform: ASUS
Selected model: ZC520TL (X008D)
Please, power phone OFF, press and hold "Vol-" button and connect USB cable.
Searching for a phone. Please wait...
Found phone on COM30
Detecting Chip Version...
HW Chip: MT6735: 0335.0000
HW Version: 8A00.CB00.0000.0000
Connecting...
Brom Version: 05
BootLoader Version: FE
Searching Download Agent...
Selected DA: MTK_AllInOne_DA_v3.3001.2017-09-06.13:15_388644, n.10
Sending Download Agent...
DA sent successfully
Initializing DA...
Synchronizing with DA...
NAND Flash: not installed
eMMC Flash: .15010051.5831334D.42078EA5.D893249B
eMMC Flash: Samsung: QX13MB
DA ver: 4.2.9B
Initializing Memory Flash..
Sending BootLoader Info...
Initialization successfully completed
Sending loaders...
Loader send successfuly.
Reading Flash Info...
EMMC rpmb size: 4 Mb
EMMC boot1 size: 4 Mb
EMMC boot2 size: 4 Mb
EMMC gp1 size: 0 Mb
EMMC gp2 size: 0 Mb
EMMC gp3 size: 0 Mb
EMMC gp4 size: 0 Mb
EMMC user area size: 29820 Mb
Internal RAM size: 128 Kb
External RAM size: 2048 Mb
Reading partition...
Reading info...
Brand: asus
Model: ASUS_X008D
Device: ASUS_X008_1
Platform: mt6737m
Android version: 7.0
Display ID: NRD90M.WW_Phone-14.10.1711.92-20171218
Searching for signatures...
Resetting FRP lock..
FRP lock is successfully reseted!
Backup saved as ASUS_ZC520TL (X008D)_13-03-2018_11-24-23.dump file
Performed by 1.1.7 Software version.

[pintu_das]

HUAWEI MYA-L22 FRP lock is successfully reseted!




Put the phone in FastBoot Mode:
1. Remove SD and SIM cards from the phone
2. Power phone OFF
3. Press and hold "Vol-" and insert USB cable
4. Wait until the phone enter in FastBoot Mode




[IMG][/IMG]




Welcome to Octoplus FRP Tool v.1.1.7
Platform: HUAWEI
Selected model: MYA-L22
Put the phone in FastBoot Mode:
1. Remove SD and SIM cards from the phone
2. Power phone OFF
3. Press and hold "Vol-" and insert USB cable
4. Wait until the phone enter in FastBoot Mode
Searching for a phone. Please wait...
Operation was failed!
Performed by 1.1.7 Software version.

Platform: HUAWEI
Selected model: MYA-L22
Put the phone in FastBoot Mode:
1. Remove SD and SIM cards from the phone
2. Power phone OFF
3. Press and hold "Vol-" and insert USB cable
4. Wait until the phone enter in FastBoot Mode
Searching for a phone. Please wait...
Detected phone model: MYA-L22
Phone SN: R9KBBCB760900567
Connecting to server..OK
Authorizing...OK
Resetting FRP lock..
FRP lock is successfully reseted!
Performed by 1.1.7 Software version.





Thanks Octoplus team

[danieltotten35]

Platform: LG
Selected model: LS676
Put the phone into Download Mode:
1. Power phone OFF;
2. Press and hold "Vol+" button and connect USB cable.
Searching for a phone. Please wait...
Found phone on COM732
Reading info...
Detected phone model: LGLS676
Mode: Emergency
Initializing..
SW version: LS676ZV3_00
Android version: 6.0.1
Reading partition...
Resetting FRP lock..
Step 1...
Step 2...
Step 3...
FRP lock is successfully reseted!

[danieltotten35]

Platform: LG
Selected model: M250F
Put the phone into Download Mode:
1. Power phone OFF;
2. Press and hold "Vol+" button and connect USB cable.
Searching for a phone. Please wait...
Found phone on COM277
Reading info...
Detected phone model: LG-M250F
Mode: Emergency
Initializing..
SW version: LGM250FAT-01-V10a-370-02-JUN-20-2017+1
Android version: 7.0
Reset FRP operation for M250F will delete all user data on the phone (contacts, pictures and others)!
Do You want to continue?
Reading partition...
Resetting FRP lock..
Writing loader...
Writing userdata...
Formating encrypt section
Restoring loader...
Perform factory reset to complete operation!
FRP lock is successfully reseted!

[pintu_das]

Samsung Galaxy A7 2016 SM-A710F Resetting FRP lock success via Micro UART cable (with 525K resistor):



Connect Samsung Micro UART cable(with 525K resistor), press and hold "Vol-" + "Power" buttons for 15-20 seconds







Welcome to Octoplus FRP Tool v.1.1.8
Platform: SAMSUNG
Selected model: SM-A710F
Searching for a phone (waiting for ADB device)...
Operation was canceled
Performed by 1.1.8 Software version.

Platform: SAMSUNG
Selected model: SM-A710F
Searching for UART interface.. COM3
Connect Samsung Micro UART cable(with 525K resistor), press and hold "Vol-" + "Power" buttons for 15-20 seconds
Searching for device. Please wait...
Phone found.
Rebooting phone in Upload Mode...OK
Please connect phone to USB cable..
Searching for a phone. Please wait...OK
Reading data...
Checking operation...OK
Searching for UART interface.. COM3
Connect Samsung Micro UART cable(with 525K resistor), press and hold "Vol-" + "Power" buttons for 15-20 seconds
Searching for device. Please wait...
Phone found.
Searching for UART interface.. COM3
Connect Samsung Micro UART cable(with 525K resistor), press and hold "Vol-" + "Power" buttons for 15-20 seconds
Searching for device. Please wait...
Phone found.
Resetting FRP lock..success
FRP lock is successfully reseted!
Performed by 1.1.8 Software version.



Thanks Octoplus team

[UzUnlocker]

Samsung A7-2016 (SM-A710L 7.0) FRP Reset Via UART Successfully Done !!!

[pintu_das]

Huawei Mate 10 Lite LTE-A RNE-L01 FRP lock is successfully reseted!



Put the phone in FastBoot Mode:
1. Remove SD and SIM cards from the phone
2. Power phone OFF
3. Press and hold "Vol-" and insert USB cable
4. Wait until the phone enter in FastBoot Mode







Welcome to Octoplus FRP Tool v.1.1.8
Platform: HUAWEI
Selected model: RNE-L01
Put the phone in FastBoot Mode:
1. Remove SD and SIM cards from the phone
2. Power phone OFF
3. Press and hold "Vol-" and insert USB cable
4. Wait until the phone enter in FastBoot Mode
Searching for a phone. Please wait...
Detected phone model: RNE-L01
Phone SN: 2VN5T17B15001443
Phone IMEI: 866532030691815
Phone IMEI2: 000000000000000
SW version: RNE-L01C55B131
Connecting to server..OK
Authorizing...OK
Resetting FRP lock..
If the device didn't reboot automatically, try to reconnect USB cable or re-boot it manually.
FRP lock is successfully reseted!
Performed by 1.1.8 Software version.





Thanks Octoplus team

[danieltotten35]

Platform: ALCATEL
Selected model: OT-5054O
Please, power phone OFF and connect USB cable.
Searching for a phone. Please wait...
Found phone on COM376
Mode: Diagnostic
Rebooting to Qualcomm 9008 mode...
Found phone on COM121
Mode: Qualcomm 9008
Connecting...
Sending loaders...
Loader send successfuly.
Reconnecting...
Checking request..
Reading partition...
Reading info...
Brand: TCL
Model: Alcatel_5054O
Device: Pop355
Platform: msm8909
Android version: 5.1.1
Display ID: LMY47V release-keys
Searching for signatures...
Resetting FRP lock..
FRP lock is successfully reseted!
Rebooting phone
Backup saved as ALCATEL_OT-5054O_13-03-2018_00-18-42.dump file

[UzUnlocker]

Huawei DLI-TL20 FRP Reset done One Click !!! PERFECT !!!

[ppdavisito]

Success Reset FRP on ZTE AXON A1:



Platform: ZTE
Selected model: AXON A1
Put the phone into Factory mode:
1. Power phone OFF;
2. Press and hold "Vol-" button and connect USB cable.
Searching for a phone. Please wait...
Found phone on COM35
Mode: Diagnostic
Firmware released date: Jul 7 2016
Firmware released time: 00:25:01
Firmware compiled date: Jan 24 2016
Firmware compiled time: 23:00:00
SW version: MPSS.DI.4.0.1-00187-M8974AAAAANAZM-1
Rebooting to Qualcomm 9008 mode...
Found phone on COM320
Mode: Qualcomm 9008
Connecting...
Sending loaders...
Loader send successfuly.
Reconnecting...
Checking request..
Reading partition...
Searching for signatures...
Resetting FRP lock..
Rebooting phone
Backup saved as ZTE_AXON A1_23-02-2018_17-31-05.dump file
FRP lock is successfully reseted!
Performed by 1.0.7 Software version.

[ppdavisito]

Success Reset FRP on SM-T377A:

INFO : 13/03/2018 19:15:45 > Platform: SAMSUNG
INFO : 13/03/2018 19:15:45 > Selected model: SM-T377A
WARN : 13/03/2018 19:15:49 > Reset FRP/ Reactivation lock operation for SM-T377A will delete all user data on the phone (contacts, pictures and others)!
WARN : 13/03/2018 19:15:49 >
WARN : 13/03/2018 19:15:49 > NOTE: You can reset FRP/ Reactivation without losing user data via Factory Reset FRP/ Reactivation service.
WARN : 13/03/2018 19:15:49 > Connecting to server...
INFO : 13/03/2018 19:15:52 > Connecting to server...Ok!
INFO : 13/03/2018 19:15:52 > Checking resource files...
INFO : 13/03/2018 19:16:17 > Downloading resources...
INFO : 13/03/2018 19:18:35 > All necessary resource files have been downloaded successfully.
WARN : 13/03/2018 19:18:35 > Please put the phone into Download Mode and connect USB cable.
WARN : 13/03/2018 19:18:39 > To put SM-T377A into Download Mode, You have to perform the following steps:
WARN : 13/03/2018 19:18:39 > 1. Reconnect the battery.
WARN : 13/03/2018 19:18:39 > 2. Press and hold "Volume-" + "Home" + "Power ON" keys.
WARN : 13/03/2018 19:18:39 > 3. When phone turns on, press "Volume+" key.
INFO : 13/03/2018 19:18:39 > Waiting for phone...
INFO : 13/03/2018 19:18:39 > Firmware write started.
INFO : 13/03/2018 19:18:39 > Writing Custom section...
INFO : 13/03/2018 19:18:42 > Custom section has been written successfully.
INFO : 13/03/2018 19:18:42 > Firmware writing successfully completed.
WARN : 13/03/2018 19:18:42 > FRP lock is successfully reseted!
BINF : 13/03/2018 19:18:42 > Wait 3-4 min then goto "Menu -> Settings -> Backup and reset" and make "Factory data reset"
INFO : 13/03/2018 19:18:42 > Performed by 1.1.7 Software version.

[ppdavisito]

Success Reset FRP on Motorola XT1767:

INFO : 3/13/2018 6:05:02 PM > Platform: MOTOROLA
INFO : 3/13/2018 6:05:02 PM > Selected model: XT1767
WARN : 3/13/2018 6:05:02 PM > Put the phone into Factory Mode:
WARN : 3/13/2018 6:05:02 PM > 1. Power phone OFF;
WARN : 3/13/2018 6:05:02 PM > 2. Press and hold "Vol-" + "Power" buttons;
WARN : 3/13/2018 6:05:02 PM > 3. Select Factory Mode, then confirm your selection;
WARN : 3/13/2018 6:05:02 PM > 4. Wait until the phone Power ON;
WARN : 3/13/2018 6:05:02 PM > 5. Connect USB cable.
INFO : 3/13/2018 6:05:02 PM > Searching for a phone. Please wait...
INFO : 3/13/2018 6:05:02 PM > Phone found.
INFO : 3/13/2018 6:05:02 PM > Reading info...
INFO : 3/13/2018 6:05:03 PM > Phone model: 8937.gen:
INFO : 3/13/2018 6:05:03 PM > Firmware released date: Jun 10 2017
INFO : 3/13/2018 6:05:03 PM > Firmware released time: 22:44:46
INFO : 3/13/2018 6:05:03 PM > Firmware compiled date: Jun 08 2017
INFO : 3/13/2018 6:05:03 PM > Firmware compiled time: 23:00:00
INFO : 3/13/2018 6:05:03 PM > SW version: MPSS.JO.3.0-00269-8937_GENNS_PACK-1.95745.3.102706.1
INFO : 3/13/2018 6:05:03 PM > Enabling "USB Debugging" mode...
WARN : 3/13/2018 6:05:03 PM > Put the phone in Factory Mode:
1. Disconnect USB cable;
2. Power OFF the phone;
3. Press "Vol-" and "Power" buttons;
4. Select Factory Mode then confirm your selection;
5. Wait until phone is power ON and connect USB Cable;
6. Install necesarry drivers then press "OK" button
WARN : 3/13/2018 6:07:38 PM > Please, press "OK" button on the phone to allow USB debugging..
INFO : 3/13/2018 6:07:40 PM > Searching for a phone (waiting for ADB device)...
INFO : 3/13/2018 6:07:40 PM > Phone found.
INFO : 3/13/2018 6:07:40 PM > Reading info...
INFO : 3/13/2018 6:07:42 PM > Phone model: motorola Moto E (4)
INFO : 3/13/2018 6:07:42 PM > SW version: NDQ26.69-23-2
INFO : 3/13/2018 6:07:42 PM > Date: Tue Jun 13 22:27:31 CDT 2017
INFO : 3/13/2018 6:07:43 PM > Android version: 7.1.1
INFO : 3/13/2018 6:07:43 PM > Baseband M8917_16000.269.04.03.01R PERRY_NA_CUST
INFO : 3/13/2018 6:07:43 PM > Detected phone model: XT1767
INFO : 3/13/2018 6:07:43 PM > Resetting FRP lock..
WARN : 3/13/2018 6:07:52 PM > FRP lock is successfully reseted!
INFO : 3/13/2018 6:07:52 PM > Performed by 1.1.7 Software version.

[elton1985]

Sending BootLoader Info...
Initialization successfully completed
Sending loaders...
Loader send successfully.
Reading Flash Info...
EMMC rpmb size: 0 Mb
EMMC boot1 size: 4 Mb
EMMC boot2 size: 4 Mb
EMMC gp1 size: 0 Mb
EMMC gp2 size: 0 Mb
EMMC gp3 size: 0 Mb
EMMC gp4 size: 0 Mb
EMMC user area size: 7456 Mb
EInternal RAM size: 128 Kb
External RAM size: 1024 Mb
Reading partition...
Reading info...
Brand: Lenovo
Model: Lenovo K10a40
Device: K10a40
Platform: mt6735m
Android version: 6.0
Display ID: K10a40_S042_160708_ROW
Searching for signatures...
Resetting FRP lock..
FRP lock is successfully reseted!
Backup saved as LENOVO_K10A40_15-03-2018_16-09-06.dump file
Performed by 1.1.8 Software version.