GSM Shop GSM Shop
GSM-Forum  

Welcome to the GSM-Forum forums.

You are currently viewing our boards as a guest which gives you limited access to view most discussions and access our other features.
Only registered members may post questions, contact other members or search our database of over 8 million posts.

Registration is fast, simple and absolutely free so please - Click to REGISTER!

If you have any problems with the registration process or your account login, please contact contact us .

Go Back   GSM-Forum > Product Support Sections > Hard/Software Products (official support) > Octopus/Octoplus > Octoplus FRP Tool

Reply
 
LinkBack Thread Tools Display Modes
Old 03-05-2019, 06:16   #3466 (permalink)
No Life Poster
 
Join Date: Aug 2014
Posts: 658
Member: 2233266
Status: Offline
Thanks Meter: 252

Welcome to Octoplus FRP Tool v.1.6.5.0
Platform: HUAWEI
Selected model: MYA-U29
Put the phone in FastBoot Mode:
1. Remove SD and SIM cards from the phone
2. Power phone OFF
3. Press and hold "Vol-" and insert USB cable
4. Wait until the phone enter in FastBoot Mode
Searching for a phone. Please wait...
Detected phone model: MYA-U29
Phone SN: B5GBBCA790705526
Connecting to server..OK
Authorizing...OK
Resetting FRP lock..
FRP lock is successfully reseted!
Performed by 1.6.5.0 Software version.
  Reply With Quote
Old 03-05-2019, 09:11   #3467 (permalink)
No Life Poster
 
genci titi 2002's Avatar
 
Join Date: Oct 2005
Location: TITI 2002 SERVIS CELULAR PG/AL
Posts: 4,174
Member: 193804
Status: Offline
Sonork: 100.1684818
Thanks Meter: 1,685
Wink LG-M160 FRP lock is successfully reseted!

Welcome to Octoplus FRP Tool v.1.6.5.0
Platform: LG
Selected model: M160
Put the phone into Download Mode:
1. Power phone OFF;
2. Press and hold "Vol+" button and connect USB cable.
Searching for a phone. Please wait...
No diagnostic ports found!
Operation was failed!
Performed by 1.6.5.0 Software version.

Platform: LG
Selected model: M160
Put the phone into Download Mode:
1. Power phone OFF;
2. Press and hold "Vol+" button and connect USB cable.
Searching for a phone. Please wait...
Found phone on COM359
Reading info...
Detected phone model: LG-M160
Mode: Emergency
Initializing..
SW version: LGM160AT-00-V10d-222-01-APR-28-2018+0
Android version: 6.0.1
Platform: msm8909
Reading partition...
Detecting writing method...
Trying to repeat..
Trying third method...
Resetting FRP lock..
Trying to repeat..
Please, flash the M150x-M160x_Android_6.0.x_for_Reset_FRP.oct firmware file from Support Area ("LG/FOR UNLOCK AND REPAIR" folder), and then perform Reset FRP operation.
Performed by 1.6.5.0 Software version.

Platform: LG
Selected model: M160
Put the phone into Download Mode:
1. Power phone OFF;
2. Press and hold "Vol+" button and connect USB cable.
Searching for a phone. Please wait...
Found phone on COM359
Reading info...
Detected phone model: LG-M160
Mode: Emergency
Initializing..
SW version: LGM160AT-00-V10d-222-01-APR-28-2018+0
Android version: 6.0.1
Platform: msm8909
Writing firmware...
Opening "M150x-M160x_Android_6.0.x_for_Reset_FRP.oct"...
Writing phone firmware without real necessity is at your own risk.

Downgrade may lead to phone damage!

Please, before firmware write, disconnect all other devices from the computer (including phones, modems, etc.) and close all other running programs. To avoid errors in the flashing process, use a clean PC (without any installed drivers for other Android-based devices). Dont run any other programs or attach new devices to your computer during the flashing procedure! Don’t turn off phone and don’t disconnect cable during firmware write. Please, follow these simple instructions to avoid phone damage.
Prepairing firmware...
Setting options...
Reading partition...
Formating USERDATA section
Formating ENCRYPT section
Writing signature...
Writing 1/2 section...
Writing 2/2 section...
Reading partition...
Formating RCT section
Formating MPT section
Finalizing...
Firmware Write successfully.
Performed by 1.6.5.0 Software version.

Platform: LG
Selected model: M160
Put the phone into Download Mode:
1. Power phone OFF;
2. Press and hold "Vol+" button and connect USB cable.
Searching for a phone. Please wait...
Found phone on COM359
Reading info...
Detected phone model: LG-M160
Mode: Emergency
Initializing..
SW version: LGM160AT-00-V10d-222-01-APR-28-2018+0
Android version: 6.0.1
Platform: msm8909
Reading partition...
Detecting writing method...
Trying to repeat..
Resetting FRP lock..
FRP lock is successfully reseted!
Performed by 1.6.5.0 Software version.
  Reply With Quote
Old 03-05-2019, 09:31   #3468 (permalink)
Freak Poster
 
Join Date: Sep 2013
Location: in your Heart
Posts: 168
Member: 2025719
Status: Offline
Thanks Meter: 50
Platform: INFINIX
Selected model: X606D
Please, power phone OFF and connect USB cable.
Searching for a phone. Please wait...
Found phone on COM3
Detecting Chip Version...
HW Chip: MT6580: 6580.0000
HW Version: 8A00.CA00.0000.0000
Connecting...
Brom Version: FF
BootLoader Version: 01
Searching Download Agent...
Selected DA: MTK_AllInOne_DA_v3.3001.2017/12/29.10:21_396299, n.0
Sending Download Agent...
DA sent successfully
Initializing DA...
Synchronizing with DA...
NAND Flash: not installed
eMMC Flash: .15010046.4536324D.4203BA2A.D3A17525
eMMC Flash: Samsung: FE62MB
DA ver: 4.2.9C
Initializing Memory Flash..
Initialization successfully completed
Sending loaders...
Loader send successfuly.
Reading Flash Info...
EMMC rpmb size: 4 Mb
EMMC boot1 size: 4 Mb
EMMC boot2 size: 4 Mb
EMMC gp1 size: 0 Mb
EMMC gp2 size: 0 Mb
EMMC gp3 size: 0 Mb
EMMC gp4 size: 0 Mb
EMMC user area size: 14910 Mb
Internal RAM size: 128 Kb
External RAM size: 1024 Mb
Reading partition...
Reading info...
Brand: Infinix
Model: Infinix X606D
Device: Infinix-X606D
Android version: 8.1.0
Display ID: X606D-H8023ABD-GO-180712V58
Searching for signatures...
Resetting FRP lock..
FRP lock is successfully reseted!
Backup saved as INFINIX_X606D_05-03-2019_10-29-07.dump file
Performed by 1.6.5.0 Software version.
  Reply With Quote
Old 03-05-2019, 09:31   #3469 (permalink)
Freak Poster
 
Join Date: Sep 2013
Location: in your Heart
Posts: 168
Member: 2025719
Status: Offline
Thanks Meter: 50
Platform: INFINIX
Selected model: X606D
Please, power phone OFF and connect USB cable.
Searching for a phone. Please wait...
Found phone on COM3
Detecting Chip Version...
HW Chip: MT6580: 6580.0000
HW Version: 8A00.CA00.0000.0000
Connecting...
Brom Version: FF
BootLoader Version: 01
Searching Download Agent...
Selected DA: MTK_AllInOne_DA_v3.3001.2017/12/29.10:21_396299, n.0
Sending Download Agent...
DA sent successfully
Initializing DA...
Synchronizing with DA...
NAND Flash: not installed
eMMC Flash: .15010046.4536324D.4203BA2A.D3A17525
eMMC Flash: Samsung: FE62MB
DA ver: 4.2.9C
Initializing Memory Flash..
Initialization successfully completed
Sending loaders...
Loader send successfuly.
Reading Flash Info...
EMMC rpmb size: 4 Mb
EMMC boot1 size: 4 Mb
EMMC boot2 size: 4 Mb
EMMC gp1 size: 0 Mb
EMMC gp2 size: 0 Mb
EMMC gp3 size: 0 Mb
EMMC gp4 size: 0 Mb
EMMC user area size: 14910 Mb
Internal RAM size: 128 Kb
External RAM size: 1024 Mb
Reading partition...
Reading info...
Brand: Infinix
Model: Infinix X606D
Device: Infinix-X606D
Android version: 8.1.0
Display ID: X606D-H8023ABD-GO-180712V58
Searching for signatures...
Resetting FRP lock..
FRP lock is successfully reseted!
Backup saved as INFINIX_X606D_05-03-2019_10-29-07.dump file
Performed by 1.6.5.0 Software version.
  Reply With Quote
Old 03-05-2019, 09:34   #3470 (permalink)
No Life Poster
 
pintu_das's Avatar
 
Join Date: Jan 2015
Location: Narsingdi, Dhaka, Bangladesh
Age: 28
Posts: 2,207
Member: 2325851
Status: Offline
Sonork: 100.1680491
Thanks Meter: 2,362
Donate money to this user
Smile lenovo K2 NOTE frp remove done with Selected model: MTK GENERAL

lenovo K2 NOTE frp remove done with Selected model: MTK GENERAL











Platform: __GENERAL RESET FRP METHODS
Selected model: MTK GENERAL

Please, power phone OFF and connect USB cable.
Searching for a phone. Please wait...
Found phone on COM10
Detecting Chip Version...
HW Chip: MT6580: 6580.0000
HW Version: 8A00.CA00.0000.0000
Connecting...
Brom Version: FF
BootLoader Version: 01
Searching Download Agent...
Selected DA: MTK_AllInOne_DA_v3.3001.2018-11-07.23:57_458956, n.11
Sending Download Agent...
DA sent successfully
Initializing DA...
Synchronizing with DA...
NAND Flash: not installed
eMMC Flash: .8801034E.43617264.2039B40A.012263A5
eMMC Flash: Foresee: NCard
DA ver: 4.2.9C
Initializing Memory Flash..
Initialization successfully completed
Sending loaders...
Loader send successfuly.
Reading Flash Info...
EMMC rpmb size: 4 Mb
EMMC boot1 size: 4 Mb
EMMC boot2 size: 4 Mb
EMMC gp1 size: 0 Mb
EMMC gp2 size: 0 Mb
EMMC gp3 size: 0 Mb
EMMC gp4 size: 0 Mb
EMMC user area size: 7393 Mb
Internal RAM size: 128 Kb
External RAM size: 512 Mb
Reading partition...
Reading info...
Brand: K2__NOTE
Model: K2 NOTE
Device: Android
Platform: mt6580
Android version: 5.1

Display ID: LMY47I dev-keys
Searching for signatures...
Resetting FRP lock..
FRP lock is successfully reseted!
Backup saved as K2__NOTE_K2 NOTE_04-03-2019_15-09-23.dump file
Performed by 1.6.5.0 Software version.





Thanks Octopus team
  Reply With Quote
Old 03-05-2019, 09:37   #3471 (permalink)
No Life Poster
 
pintu_das's Avatar
 
Join Date: Jan 2015
Location: Narsingdi, Dhaka, Bangladesh
Age: 28
Posts: 2,207
Member: 2325851
Status: Offline
Sonork: 100.1680491
Thanks Meter: 2,362
Donate money to this user
Talking LAVA_R1 frp remove done with Selected model: R1 LITE

LAVA_R1 frp remove done with Selected model: R1 LITE










Platform: LAVA
Selected model: R1 LITE

Please, power phone OFF and connect USB cable.
Searching for a phone. Please wait...
Found phone on COM10
Detecting Chip Version...
HW Chip: MT6737: 0335.0000
HW Version: 8A00.CB00.0000.0000
Connecting...
Brom Version: FF
BootLoader Version: 01
Searching Download Agent...
Selected DA: MTK_AllInOne_DA_v3.3001.2018-11-07.23:57_458956, n.10
Sending Download Agent...
DA sent successfully
Initializing DA...
Synchronizing with DA...
NAND Flash: not installed
eMMC Flash: .15010051.4531334D.420D03A5.962589FB
eMMC Flash: Samsung: QE13MB
DA ver: 4.2.9B
Initializing Memory Flash..
Initialization successfully completed
Sending loaders...
Loader send successfuly.
Reading Flash Info...
EMMC rpmb size: 4 Mb
EMMC boot1 size: 4 Mb
EMMC boot2 size: 4 Mb
EMMC gp1 size: 0 Mb
EMMC gp2 size: 0 Mb
EMMC gp3 size: 0 Mb
EMMC gp4 size: 0 Mb
EMMC user area size: 14910 Mb
Internal RAM size: 128 Kb
External RAM size: 2048 Mb
Reading partition...
Reading info...
Brand: Lava
Model: LAVA_RI
Device: LAVA_R1
Platform: mt6737m
Android version: 6.0

Display ID: LAVA_R1_INT_S110_17E19
Searching for signatures...
Resetting FRP lock..
FRP lock is successfully reseted!
Backup saved as LAVA_R1 LITE_04-03-2019_14-52-34.dump file
Performed by 1.6.5.0 Software version.




Thanks Octopus team
  Reply With Quote
Old 03-05-2019, 12:53   #3472 (permalink)
No Life Poster
 
Dr_Wolodya's Avatar
 
Join Date: Jul 2004
Location: Ukraine
Age: 44
Posts: 2,727
Member: 75408
Status: Offline
Thanks Meter: 1,190
Huawei TIT-U02 Reset FRP successfully done:
Code:
Welcome to Octoplus FRP Tool v.1.6.5.0
Platform: HUAWEI
Selected model: TIT-U02
Please, power phone OFF and connect USB cable.
Searching for a phone. Please wait...
Found phone on COM19
Detecting Chip Version...
HW Chip: MT6582: 6582.0000
HW Version: 8A00.CA01.0001.0000
Connecting...
Brom Version: FF
BootLoader Version: 01
Searching Download Agent...
Selected DA: MTK_AllInOne_DA_Octoplus_Huawei_v.1, n.3
Sending Download Agent...
DA sent successfully
Initializing DA...
Synchronizing with DA...
NAND Flash: not installed
eMMC Flash: .15010051.3331334D.4206EA7F.C2AA1357
eMMC Flash: Samsung: Q313MB
DA ver: 4.2.87
Initializing Memory Flash..
Initialization successfully completed
Sending loaders...
Loader send successfuly.
Reading Flash Info...
EMMC rpmb size: 4 Mb
EMMC boot1 size: 4 Mb
EMMC boot2 size: 4 Mb
EMMC gp1 size: 0 Mb
EMMC gp2 size: 0 Mb
EMMC gp3 size: 0 Mb
EMMC gp4 size: 0 Mb
EMMC user area size: 14910 Mb
Internal RAM size: 128 Kb
External RAM size: 1024 Mb
Reading partition...
Reading partition...
Reading info...
Brand: HUAWEI
Model: HUAWEI TIT-U02
Device: HWTIT-U6582
Platform: mt6582
Android version: 5.1
Display ID: TIT-U02C579B101
Searching for signatures...
Resetting FRP lock..
FRP lock is successfully reseted!
Backup saved as HUAWEI_TIT-U02_05-03-2019_12-44-21.dump file
Performed by 1.6.5.0 Software version.
  Reply With Quote
Old 03-05-2019, 15:19   #3473 (permalink)
No Life Poster
 
Join Date: Apr 2008
Location: South Africa
Posts: 706
Member: 746586
Status: Offline
Thanks Meter: 204
Donate money to this user
HUAWEI WAS-LX1 FRP lock is successfully reseted!

Welcome to Octoplus FRP Tool v.1.6.5.0
Platform: HUAWEI
Selected model: WAS-LX1
Put the phone in FastBoot Mode:
1. Remove SD and SIM cards from the phone
2. Power phone OFF
3. Press and hold "Vol-" and insert USB cable
4. Wait until the phone enter in FastBoot Mode
Searching for a phone. Please wait...
Detected phone model: WAS-LX1
Phone SN: PMF4C17B03004487
Phone IMEI: 867440033080946
Phone IMEI2: 867440033101353
SW version: WAS-LX1C185B172
Connecting to server..OK
Authorizing...OK
Resetting FRP lock..
If the device didn't reboot automatically, try to reconnect USB cable or re-boot it manually.
FRP lock is successfully reseted!
Performed by 1.6.5.0 Software version.
  Reply With Quote
Old 03-05-2019, 15:27   #3474 (permalink)
No Life Poster
 
Join Date: Apr 2008
Location: South Africa
Posts: 706
Member: 746586
Status: Offline
Thanks Meter: 204
Donate money to this user
HISENSE U962 FRP lock is successfully reseted!

Platform: HISENSE
Selected model: U962
Please, power phone OFF, press and hold "Vol-" button and connect USB cable.
Searching for a phone. Please wait...
Found phone on COM748
Connecting...
Mobile Status: SPRD3
Sending preloader...
Mobile Status: Spreadtrum Boot Block version 1.1
Sending mainloader...
Reading info...
Brand: Hisense
Model: Hisense U962
Device: HS7731CSP
Platform: sc8830
Android version: 6.0
Display ID: Hisense_U962_S04_20161124
Searching for signatures...
Resetting FRP lock..
FRP lock is successfully reseted!
Backup saved as HISENSE_U962_05-03-2019_16-25-32.dump file
Performed by 1.6.5.0 Software version.
  Reply With Quote
Old 03-05-2019, 15:28   #3475 (permalink)
No Life Poster
 
Join Date: Apr 2008
Location: South Africa
Posts: 706
Member: 746586
Status: Offline
Thanks Meter: 204
Donate money to this user
HISENSE U962 FRP lock is successfully reseted!

Platform: HISENSE
Selected model: U962
Please, power phone OFF, press and hold "Vol-" button and connect USB cable.
Searching for a phone. Please wait...
Found phone on COM748
Connecting...
Mobile Status: SPRD3
Sending preloader...
Mobile Status: Spreadtrum Boot Block version 1.1
Sending mainloader...
Reading info...
Brand: Hisense
Model: Hisense U962
Device: HS7731CSP
Platform: sc8830
Android version: 6.0
Display ID: Hisense_U962_S04_20161124
Searching for signatures...
Resetting FRP lock..
FRP lock is successfully reseted!
Backup saved as HISENSE_U962_05-03-2019_16-25-32.dump file
Performed by 1.6.5.0 Software version.
  Reply With Quote
Old 03-05-2019, 19:35   #3476 (permalink)
Freak Poster
 
Join Date: Jun 2017
Location: SAUDI ARABIA RIYADH
Posts: 358
Member: 2725078
Status: Offline
Sonork: 1680162
Thanks Meter: 173
Welcome to Octoplus FRP Tool v.1.6.5.0
Platform: HUAWEI
Selected model: LDN-L21
Put the phone in FastBoot Mode:
1. Remove SD and SIM cards from the phone
2. Power phone OFF
3. Press and hold "Vol-" and insert USB cable
4. Wait until the phone enter in FastBoot Mode
Searching for a phone. Please wait...
Detected phone model: LDN-L21
Phone SN: 26EBB18622509985
Phone IMEI: 866781046781140
Connecting to server..OK
Authorizing...OK
Resetting FRP lock..
If the device didn't reboot automatically, try to reconnect USB cable or re-boot it manually.
FRP lock is successfully reseted!
Performed by 1.6.5.0 Software version.
  Reply With Quote
Old 03-05-2019, 19:36   #3477 (permalink)
Freak Poster
 
Join Date: Jun 2017
Location: SAUDI ARABIA RIYADH
Posts: 358
Member: 2725078
Status: Offline
Sonork: 1680162
Thanks Meter: 173
Platform: HUAWEI
Selected model: DRA-LX5
Put the phone in FastBoot Mode:
1. Remove SD and SIM cards from the phone
2. Power phone OFF
3. Press and hold "Vol-" and insert USB cable
4. Wait until the phone enter in FastBoot Mode
Searching for a phone. Please wait...
Detected phone model: DRA-LX5
Phone SN: VUY9K18B02904432
Phone IMEI2: 866567047822813
Connecting to server..OK
Authorizing...OK
Resetting FRP lock..
If the device didn't reboot automatically, try to reconnect USB cable or re-boot it manually.
FRP lock is successfully reseted!
Performed by 1.6.5.0 Software version.
  Reply With Quote
Old 03-05-2019, 19:36   #3478 (permalink)
Freak Poster
 
Join Date: Jun 2017
Location: SAUDI ARABIA RIYADH
Posts: 358
Member: 2725078
Status: Offline
Sonork: 1680162
Thanks Meter: 173
Platform: HUAWEI
Selected model: DRA-LX5
Put the phone in FastBoot Mode:
1. Remove SD and SIM cards from the phone
2. Power phone OFF
3. Press and hold "Vol-" and insert USB cable
4. Wait until the phone enter in FastBoot Mode
Searching for a phone. Please wait...
Detected phone model: DRA-LX5
Phone SN: VUY9K18B02904432
Phone IMEI2: 866567047822813
Connecting to server..OK
Authorizing...OK
Resetting FRP lock..
If the device didn't reboot automatically, try to reconnect USB cable or re-boot it manually.
FRP lock is successfully reseted!
Performed by 1.6.5.0 Software version.
  Reply With Quote
Old 03-05-2019, 19:37   #3479 (permalink)
Freak Poster
 
Join Date: Jun 2017
Location: SAUDI ARABIA RIYADH
Posts: 358
Member: 2725078
Status: Offline
Sonork: 1680162
Thanks Meter: 173
Platform: ALCATEL
Selected model: OT-5044D
Please, power phone OFF and connect USB cable.
Searching for a phone. Please wait...
Found phone on COM120
Detecting Chip Version...
HW Chip: MT6737: 0335.0000
HW Version: 8A00.CB00.0000.0000
Connecting...
Brom Version: FF
BootLoader Version: 01
Searching Download Agent...
Selected DA: MTK_AllInOne_DA_v3.3001.2018-11-07.23:57_458956, n.10
Sending Download Agent...
DA sent successfully
Initializing DA...
Synchronizing with DA...
NAND Flash: not installed
eMMC Flash: .15010046.4E58324D.42013C8D.A8601851
eMMC Flash: Samsung: FNX2MB
DA ver: 4.2.9B
Initializing Memory Flash..
Initialization successfully completed
Sending loaders...
Loader send successfuly.
Reading Flash Info...
EMMC rpmb size: 0 Mb
EMMC boot1 size: 4 Mb
EMMC boot2 size: 4 Mb
EMMC gp1 size: 0 Mb
EMMC gp2 size: 0 Mb
EMMC gp3 size: 0 Mb
EMMC gp4 size: 0 Mb
EMMC user area size: 7456 Mb
Internal RAM size: 128 Kb
External RAM size: 1024 Mb
Reading partition...
Reading info...
Brand: TCL
Model: 5044D
Device: BUZZ6T4G
Platform: mt6737m
Android version: 6.0
Display ID: MRA58K release-keys
Searching for signatures...
Resetting FRP lock..
FRP lock is successfully reseted!
Backup saved as ALCATEL_OT-5044D_05-03-2019_17-36-56.dump file
Performed by 1.6.5.0 Software version.
  Reply With Quote
Old 03-05-2019, 19:37   #3480 (permalink)
Freak Poster
 
Join Date: Jun 2017
Location: SAUDI ARABIA RIYADH
Posts: 358
Member: 2725078
Status: Offline
Sonork: 1680162
Thanks Meter: 173
Platform: ALCATEL
Selected model: OT-5044D
Please, power phone OFF and connect USB cable.
Searching for a phone. Please wait...
Found phone on COM120
Detecting Chip Version...
HW Chip: MT6737: 0335.0000
HW Version: 8A00.CB00.0000.0000
Connecting...
Brom Version: FF
BootLoader Version: 01
Searching Download Agent...
Selected DA: MTK_AllInOne_DA_v3.3001.2018-11-07.23:57_458956, n.10
Sending Download Agent...
DA sent successfully
Initializing DA...
Synchronizing with DA...
NAND Flash: not installed
eMMC Flash: .15010046.4E58324D.42013C8D.A8601851
eMMC Flash: Samsung: FNX2MB
DA ver: 4.2.9B
Initializing Memory Flash..
Initialization successfully completed
Sending loaders...
Loader send successfuly.
Reading Flash Info...
EMMC rpmb size: 0 Mb
EMMC boot1 size: 4 Mb
EMMC boot2 size: 4 Mb
EMMC gp1 size: 0 Mb
EMMC gp2 size: 0 Mb
EMMC gp3 size: 0 Mb
EMMC gp4 size: 0 Mb
EMMC user area size: 7456 Mb
Internal RAM size: 128 Kb
External RAM size: 1024 Mb
Reading partition...
Reading info...
Brand: TCL
Model: 5044D
Device: BUZZ6T4G
Platform: mt6737m
Android version: 6.0
Display ID: MRA58K release-keys
Searching for signatures...
Resetting FRP lock..
FRP lock is successfully reseted!
Backup saved as ALCATEL_OT-5044D_05-03-2019_17-36-56.dump file
Performed by 1.6.5.0 Software version.
  Reply With Quote
Reply

Bookmarks

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On


 



All times are GMT +1. The time now is 10:27.



Powered by Searchlight © 2024 Axivo Inc.
vBulletin Optimisation provided by vB Optimise (Pro) - vBulletin Mods & Addons Copyright © 2024 DragonByte Technologies Ltd.
- GSM Hosting Ltd. - 1999-2023 -
Page generated in 0.34139 seconds with 9 queries

SEO by vBSEO